Reference no: EM13545632
You are provided that a 33-year record of peak annual flow rates was subjected to a frequency analysis. You are interested in the median value. Thus, for part
(a)What is the probability that the probability if the flow rate exceeds the median value. For part
(b) you are asked to determine the return period [based on part (a)]. In part (c), you want to know what is the probability of exceeding the median value IN ANY ONE YEAR, In part (d), based on your answer in part
(c), what is the probability that the flow rate will be less than the median value? For part
(e), you are asked to determine the probability that the peak flow in all of the next 10 years will be less than the median value (use the probability intersection of all 10 years). For part
(f), it asks for the probability that the flow rate will equal or exceed the median value at least once in the next 10 years (use probability relationships to solve). For part
(g), it asks for the probability of exceeding the median flow rate in both of the next two years (again use probability relationships to solve). In part (h), it asks for the probability of exceeding the median flow rate in Year 1, but not in year 2 (again solve using probability relationships).
|
What is the tensile force on the weld per foot
: Due to a leak in Pump Station 1,the Alaska pipeline is shut down briefly.The pipe line is half full.Assume the pipe is welded horizontally at its midpoint.What is the tensile force on the weld per foot? Assume Ø=40”and ?oil=53.55lb/ft3.
|
|
The average return period of the median value
: The probability that, for a 2-year period, the peak flow rate will equal or exceed the median value in the second year, but not in the first year?
|
|
What happens after the memory is full
: Assuming approximately 19,296 data points can be held in memory, with a 21X Datalogger (CR23X Micrologger), capturing battery voltage; panel temperature
|
|
Compute the maximum fiber stress
: An S 12x40.8 of A36 steel in a building is supported as a simple beam having a span equal to 17ft 6in. and carries a uniform load equal to 1.60 klf, which includes the weight of the beam over the entire span.
|
|
What is the probability that the probability if the flow
: You are provided that a 33-year record of peak annual flow rates was subjected to a frequency analysis. You are interested in the median value. Thus, for part (a), what is the probability that the probability if the flow rate exceeds the median value..
|
|
Determine the elongation of the cable elongation
: A homogeneus cable of a lenght L and uniform cross section is suspended from one end. A. denoting by p the density (mass per unit volume) of the cable and by e its modulus of elasticity. determine the elongation of the cable
|
|
Determine the design load for strength and serviceability
: Determine the design load for strength and serviceability limit states (short-term and long term), for a steel beam in a residential building with the following data;
|
|
Determine the runoff rate from a two storm system if the
: Determine the runoff rate at t = 15.0 hr from a two storm system if the first storm drops 2.0-inches starting at t = 0, and the second storm drops 5.0-incheds starting at t = 12.0 hrs.
|
|
Compute the unit weight dry unit weight degree of saturation
: Find the live load capacity, Pl of a beam with f prime c=4 ksi, fy=60 ksi, Wd=self weight, beam width b=18 inches, beam height h=24 inches, effective depth=21 inches, concrete unit weight=150 pcf, steel As=3-#9 bars.
|