What is the principal alloy in steel

Assignment Help Civil Engineering
Reference no: EM13542244

1.A 2-ft diameter circular pipe has a Manning's n of 0.013 and a bed slope of 2.0 X 10^-3. What is the uniform flow rate in this pipe if it is completely full (Qf) in ft^3/s? What is the centerline uniform water depth (y0) in the channel if the flow, Q = 6.0 ft^3/s?

2.What is the principal alloy in steel and why is it added to steel when in molten state during manufacture.

3.Four forces act on a small airplane in flight: its weight (26 kN), the thrust provided by the engine (9 kN), the lift provided by the wings (25 kN), and the drag resulting from its motion through the air (3 kN). Determine the resultant of the four forces and its line of action with respect to the axis of the plane.

Reference no: EM13542244

Questions Cloud

The divider is removed and the system eventually attains : The system is initially divided in two parts, with 1/3 of the mass at T1 and 2/3 of the mass at T2. The divider is removed and the system eventually attains equilibrium.
Compute the radius of the second curve : Two converging tangents have azimuths of 300 deg and 270 deg respectively, while thAt of the common tangent is 320 deg. The distance from the point of intersection of the tangents to the PI of the second curve is 100m while the stationing of the PI o..
The heated water outflow from a nuclear power plant : The heated water outflow from a nuclear power plant is cooled in a 50-m wide rectangular channel that has a discharge, Q = 225.0 m3/s. The Manning’s n is 0.015 and the bed slope is 5.0x10-4
A hydraulic jump occurs at the entrance of this channel : A hydraulic jump occurs at the entrance of this channel, with a downstream depth equal to the uniform flow depth. What is the upstream depth, y1, of the hydraulic jump?
What is the principal alloy in steel : A 2-ft diameter circular pipe has a Manning's n of 0.013 and a bed slope of 2.0 X 10^-3. What is the uniform flow rate in this pipe if it is completely full (Qf) in ft^3/s? What is the centerline uniform water depth (y0) in the channel if the flow, Q..
Categories and number as well as capacities : Categories and number as well as capacities
List and briefly two example of loss exposures : List and briefly two example of loss exposures that are not well suited to risk pooling, and explain the reasons why risk pooling is not effective for these loss exposures.
What is the total value : Company has revenue of $1000 in 2009. Our current estimate is that revenues will grow 25% per year. Our profit each year will equal 20% of revenue. What is the total value (rounded to the nearest dollar) of all revenues earned during the years..
Make a strategic decision - zara case : Make a strategic decision for a selected case company, aiming to establish a sustainable competitive advantage that results in superior economic returns

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is probability that it will be found by both inspectors

Items are inspected for flaws by two quality inspectors. If a flaw is present, it will be detected by the first inspector with probability 0.9, and by the second inspector with probability 0.7. Assume the inspectors function independently.

  Calculate the dry unit weight of the compacted earth fill

During construction of a highway project, a soil sample was taken from compacted earth for a sand-cone in place denstiy test. The following data were obtained from the test. Weight of sand used to fill test hole and funnel of sand-cone device= 845..

  What will be the new exponent of the blasius equation

The relative roughness ofa pipe is 0.0005, if the blasius equation is applicable for Thecflow Reynolds number above 2700 rather then 3000

  Compute the required weight of the aggregate per cubic yard

Concrete mix with a 3 in slump, w/c ratio of .5, and sand with a fineness modulus of 2.4 contains 1700 lb of coarse aggregate.

  What is the rolling resistance of the loaded unit

Estimated rolling resistance factor the haul road is 3000 lb/ton.  If the scraper weighs 35,000 lb (empty) and carries 25 loose cubic yards per trip.  What is the rolling resistance of the loaded unit?

  Determine the change in length and the change in diameter

The acrylic plastic rod is 200mm long and 15mm in diameter. If an axial load of 300N is applied to it, determine the change in its length and the change in its diameter. Ep = 2.70 GPa, Vp = 0.4.

  Determine to the nearest 1 by 4 in the smallest dimension h

If A and B are both made of wood and are 3/8 in thick, determine to the nearest ¼ in the smallest dimension h of the support so that the average shear stress does not exceed \tauallow = 300 psi.

  How to compute the year in which the gradient ends

the present worth of an increasing geometric gradient is $23,632. The interest rate is 10% per year, and the rate of change is 4% per year. If the cash flow amount in year 1 is $3000

  Prepare a capstone report

Prepare a capstone report for designing of steel building using AISC 14 edition manual.

  Direction of the velecity of the cars after collision

If friction between the cars and the rails is neglected, what were the magnitude and the direction of the velecity of the cars after the collision?

  Determine if equation of continuity is satisfied by sketch

Consider the plane polar coordinate velocity distribution V_r=C/r, V_0=K/r, V_z=0, where C and K are constants (a) determine if the equation of continuity is satisfied (b) by sketching some velocity vector directions

  Calculate the friction head loss per meter of pipe

When fluid of specific weight 8.2 KN/m^3 flows in a 150-mm-diameter pipe, the frictional stress between the fluid and the pipe wall is 25 N/m^2. Calculate the friction head loss per meter of pipe

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd