What is the primary side current in the transformer

Assignment Help Mechanical Engineering

Reference no: EM13713169

A single phase step up transformer is used to transform 240VRMS to 2400VRMS. The transformer is operating at its rated power of 1kW (with purely resistive load), with transformer Reqp = 5, and a Xeqp = 4j, ignore the magnetising branch.

a. What is the primary side current in the transformer (Angle and magnitude)?

b. What is the secondary side voltage (Angle and magnitude)?

c. What is the secondary side current (Angle and magnitude)?

d. What is the real power output?

e. What is the efficiency of the transformer?

Reference no: EM13713169

Questions Cloud

Determine the minimum diameter of the pipe : Gasoline (density = 680 kg/m^3 and kinematic viscosity = 4.29x10^-7 m^2/s) is transported at a rate of 150 L/s for a distance of 2 km. The surface roughness of the piping is 0.03 mm. If the head loss due to pipe friction is not to exceed 10 m, determ..

Structural steel with a fracture toughness : A structural steel with a fracture toughness of 60 MPa(m^1/2) has no surface crack larger than 3.5 mm in length. By how much (in %) would this largest surface crack have to grow before the system would experience fast fracture under an applied stress..

Find the required dc offset and amplification : A voltage signal ranges between -0.50 V and 1.00 V. The signal is to be sampled by an A/D converter that has an input range of 0 to 5 V. For maximum resolution, the signal is to be conditioned such that it fits the full input range of the A/D convert..

Calculate the size of the current. : a 65.2 cm long straight section of wire is located entirely inside a uniform magnetic field of |B| = 0.190 T. Calculate the size of the current.

What is the primary side current in the transformer : A single phase step up transformer is used to transform 240VRMS to 2400VRMS. The transformer is operating at its rated power of 1kW (with purely resistive load), with transformer Reqp = 5, and a Xeqp = 4j,

Concentration of a metabolite within the bloodstream : The concentration of a metabolite within the bloodstream is 100 parts per million. Assume that 1000 mg of metabolite is to be used as a tracer, it is injected over 5 min and the downstream concentration is measured to be 4000ppm.

Find their common final velocity. : Now suppose the gliders in the previous problem collide completely inelastically so that they stick together rather than rebounding off each other after they collide. Find their common final velocity.

Role of the firms tax rate in cost of capital calculations : Describe the role of the firm's tax rate in cost of capital calculations?

What is the mass flow rate of steam through the diffuser : Steam at a pressure of 14.7psia and a temperature of 320deg F enters a diffuser inlet at a velocity of 500ft/s. The steam decelerates in the diffuser to a velocity of 100ft/s. The steam leaves the diffuser as saturated vapor at 240 deg F. The area of..

User Account

All Pages