What is the pressure on the soil if theta is 45 degrees

Assignment Help Civil Engineering
Reference no: EM13303410

A pipe is to be installed under the ground on a bed of aggregate 6 in. thick. The entire weight on the aggregate from pipe and soil above the pipe is 1800 lbs. per linear foot of pipe. What is the pressure on the soil if theta is 45 degrees? Assume the pipe load on the aggregate acts on a line.

Reference no: EM13303410

Questions Cloud

How much energy is produced in this annihilation : A proton and an antiproton, both at rest with respect to one another, How much energy is produced in this annihilation
Calculate bulk specific gravity nd apparent specific gravity : A sample of coarse aggregate weights 1072 grams when oven-dried, 1091 grams when saturated surface-dried, and 667.6 grams when submerged. Calculate the bulk specific gravity, apparent specific gravity, and percent absorption.
What is the final temperature of the rod and the mercury : A cylindrical lead rod with a diameter of 2.54 cm and a length of 76.2 cm is initially at a temperature of 20.0 C. After reaching equilibrium, what is the final temperature of the rod and the mercury
Are medical ethicists out of touch with the reality of manag : Two consider the following question: "Are medical ethicists out of touch with the reality of managing health care and practicing medicine?" Discuss the question and take a stance. Cite references.
What is the pressure on the soil if theta is 45 degrees : A pipe is to be installed under the ground on a bed of aggregate 6 in. thick. The entire weight on the aggregate from pipe and soil above the pipe is 1800 lbs. per linear foot of pipe. What is the pressure on the soil if theta is 45 degrees
What is the economic meaning of a recession : Discuss the extent to which the use of demand side policies (fiscal policy and monetary policy) during the Great Recession of 2008 has been successful in restoring economic growth and reducing unemployment
What depth of aggregate is needed if angle theta is 40degree : A 2000-lb wheel load is to be supported by aggregate over soil with a maximum bearing pressure of 1000 lb/sqft. What depth of aggregate is needed if the angle theta is 40 degrees
What is the present value of your windfall : What is the present value of your windfall if the appropriate discount rate is 9 percent?
Provide an analysis of the four attributes of the diamond : For each country, China and India, provide an analysis of the four attributes of the diamond and discuss the relative importance of domestic vs. international factors for the nation's competitiveness of the automotive industry.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute minimum footing width required to maintain safety

a bearing wall carries a dead load of 120kn/m and live load of 100 kn/m. It is to be supported on a 400mm deep continuous footing underlain by a medium sand (unit weight = 19.2 kn/m3, phi= 37 deg, effective c = 0).

  Determine the downstream water level to produce the flowrate

The flow through an 8 ft. Parshall Flume is 129 cfs when Ha is 2.50 ft. Determine the downstream water level (Hb) that would produce this flowrate.

  Calculate the space-mean speed in mile per hour

If there are 50 vehicles on a 4000-ft highway lane and the average time headway between two adjacent vehicles is 2.2 seconds. A) Calculate traffic density in vehicle/mile (vpm) and average space headway in feet/vehicle (fpv).

  Which machine should be chosen using an interest rate

North City must choose between two new snow-removal machines. The SuperBlower has a $70,000 first cost, a 20 year life, and an $8000 salvage value. At the end of 9 years , it will need a major overhaul costing $19,000.

  Determine what is the expected efficiency of the system

A disinfection process for potable water treatment is described by first order kinetics with a rate constant of 0.08 minute. An ideal plug flow reactor is used with a hydraulic residence time of 1 hour. What is the expected efficiency of the syste..

  Determine the pressure within the tank using psf as unit

A water-filled U-tube manometer is used to measure the pressure inside a tank that contains air. The water level in the U-tube on the side that connects to the tank is 5 ft above the base of the tank.

  Calculate the maximum bending stress

a round steel rod, 25 mm in diameter, subjected to a bending moment of 160 Nxm. calculate the maximum bending stress.

  Steps of dmaic abandoned

Assume that during the analyze stage an obvious solution is discovered. Should that solution be immediately implemented and the remaining steps of DMAIC abandoned?

  Find the minimum flow rate of air

Find the minimum flow rate of air and the heat exchanger second-law efficiency.

  Find density-volume-to-capacity ratio and level of services

A bus strike will eliminate all bus traffic, but it is estimated that for each bus removed from the roadway, seven additional passenger vehicles will be added as travelers seek other means of travel. What are the density, volume-to-capacity ratio,..

  Calculating coefficient of permeability

The temperature was 200C, and the void ratio (e) of the soil was 0.43. Calculate the "Coefficient of Permeability" in "centimeters per second" (Given, k = (QL)÷(A Δh t)).

  Engineering ethics and ethical issue

what is the engineering ethics course where to write about any engineering ethical case and discuss the ethical issue?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd