What is the pressure in pipe at point a consider friction

Assignment Help Civil Engineering
Reference no: EM13306089

A reservoir discharge into a 60-inch concrete pipe (rough surface) that discharges freely. what is the pressure in the pipe at point A? consider friction, but neglect minor losses.

Reference no: EM13306089

Questions Cloud

What horizontal distance does it travel : If the ball was hit when it was 1.2m above the ground, what horizontal distance does it travel before it lands on the building
What is the velocity of the projectile at the end of process : For simplicity assume the catapult consists of the piston-cylinder geometry (with the piston as the projectile) and that it is positioned horizontally. The steam initially occupies a volume of 1 liter at a pressure of 200 kpa.
A chief operating officer in a health care organization : A chief operating officer in a health care organization in India
Compute detention time and horizontal flow through velocity : Compute the detention time and horizontal flow through velocity. Do these values satisfy the standards for water works, which stipulate detention time is greater and equal to 30 min and 0.5 ft/min =
What is the pressure in pipe at point a consider friction : A reservoir discharge into a 60-inch concrete pipe (rough surface) that discharges freely. what is the pressure in the pipe at point A consider friction, but neglect minor losses.
Write an expression that refers to the first element : Given an ArrayList a , write an expression that refers to the first element of the ArrayList.
Choose a project leader : Choose a project leader who has influenced you the most in your life or career.
Invoke method to tell the air conditioner object to turn on : Using the reference variable, invoke a method to tell the air conditioner object to turn on.
Determine the speed before the plunger strikes the stop : If the arm is pulled back such that s= 100 mm and released, determine the speed of the 0.41-kg pinball B just before the plunger strikes the stop, i.e., s= 0. Assume all surfaces of contact to be smooth.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the maximum acceptable service load

Compute the maximum acceptable service load on an A36 steel plate tension member 1/4in.x12in. having a single line of holes parallel to the direction of loading. The load is 25% dead load and 75% live load, and 7/8in. diameter bolts are used.

  Determine the horizontal and vertical components of reaction

The winch consists of a drum radius 4 in., which is pin connected at its center C. At its outer rim is a ratchet gear having a mean radius of 6 in. The pawl AB serves as a two-force member (short link) and keeps the drum from rotating.

  How to determine the head loss caused by the piers

A bridge has cylindrical piers 1 m in diameter and spaced 15 m apart. Downstream of the bridge where the flow disturbance from the piers is no longer present, the flow depth is 2.9 m and the mean velocity is 2.5 m/s.

  What is the ratio of night to day accidents for fatalities

What would the B/C ratio be if the light poles were twice as far apart as assumed above?

  Determine how much pressure is developed in the system

A multiple-piston hydraulic jack has two output pistons, each with an area of 250 cm^2. The input piston, whose area is 25 cm^2, is concerned to a lever that has a mechanical advantage of 9:1.

  What is the wavelength of the electromagnetic radiation

You heat 250 ml of tap water from 10 degree celcius to 100 degree celcius in 2 minutes using a microwave oven operating at 2.5 GHz. a). What is the wavelength of this electromagnetic radiation

  Determine the depth of flow at the transition at a depth

A 1.6-m wide rectangular channel carries 1.8 m3/s at a depth of 0.85 m. The channel undergoes a smooth transition in which the channel bottom rises 15 cm and contracts to a width of 1.3 m. Assuming friction losses are negligible, determine the dep..

  Determine what is the expected efficiency of the system

A disinfection process for potable water treatment is described by first order kinetics with a rate constant of 0.08 minute. An ideal plug flow reactor is used with a hydraulic residence time of 1 hour. What is the expected efficiency of the syste..

  Determine the new angular speed with moment of inertia

Person spining has his arms outward. The moment of inertia is 52kg*m^2 and ang. speed 3.80 revolutions/ second. if the persons arms are down. moment of inertia goes to 35kg*m^2. find the new angular speed

  What is the stationing of the pt on the same highway

A crest vertical vurve and a horizontal curve on the same highway have the same design speed. The equal-tangent vertical curve connects a +3% initial grade with a +1% final grade and has a PVC at 101+78 and a PVT at 106+72

  Determine what is the void ratio and the specific gravity

For a same soil, two moist densities and their corresponding degrees of saturation are given in the following table Density (kg/m^3) S(%) 1700 55 1800 70 What is the void ratio (e) and the specific gravity (Gs)?

  Find the magnitude of r dot and theta double dot at t

If r = (theta)2 and theta = 2t, find the magnitude of r dot and theta double dot when t = 2 s

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd