User Account

All Pages

What is the percentage change in the specific weight

Assignment Help Civil Engineering
Reference no: EM13308308

At a depth of 4 miles in the ocean the ppressure is 9520 psia. Assume that the specific weight at the surface is 64.0 lb/ft^3 and that the average volume modulus is 320000psi for the pressure range. answer the following,

a)What will be the change in density at that depth?

b)What will be the specific volume at that depth?

c)What will be the specific weight at that depth?

d)What is the percentage change in the specific weight?

Reference no: EM13308308

Questions Cloud

Describe a pipelined datapath needed to support : Describe a pipelined datapath needed to support the following instruction. Also specify the values of control signals using the diagram in the text book.
Calculate the absolute pressure head and the gage pressure : The pressure in the steam condenser of a nuclear power plant is 1 psia. Calculate the absolute pressure head, the gage pressure, the gage pressure head, the vacuum pressure, and the vacuum pressure head under standard conditions.
Estimate the final dbm value for a radio : Estimate the final dBm value for a radio if the radio has .1 Watt of power, if there is a 4:1 amplifier before transmission, and if there is attenuation to 1/8 the original signal strength between the sender and receiver.
Convert number f(t) decaying each minute to the number r(t) : Radioactive carbon 11 has a decay rate k of 0.0338 per minute-that is, a particular C11 atom has a 3.38% chance of decaying in any one minute. Suppose we start with 100 such atoms.
What is the percentage change in the specific weight : At a depth of 4 miles in the ocean the ppressure is 9520 psia. Assume that the specific weight at the surface is 64.0 lb/ft^3 and that the average volume modulus is 320000psi for the pressure range.
How to determine maximum positive factored design moments : How to determine maximum positive and maximum negative factored design moments at a certain point
What that means for your decision to do : Based on the above data, and on your preliminary SWOT analysis from Applied Topic 1, write a 3-4 page essay on the overall health of the economy and what that means for your decision to do
Determine what is the percentage yield of the reaction : The combustion of 52.8g of butane produces 104.0g of CO2. what is the percentage yield of the reaction
Make a report that identifies the most expensive bicycles : Prepare a report that identifies the five most expensive bicycles. The report should list the bicycles in descending order from most expensive to lsit expensive, the quantity on hand for each, and the mark up percentage for each.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the heat transfer from a steady-flow combustor

Find the heat transfer (in KJ/Kmol)from a steady-flow combustor if the products are at 1000 K and (a) complete combustion occurs; (b) 95% of the carbon is converted to CO2 and 5% to CO.

  Pore water pressure at failure

A CU triaxial test with σc = 20 psi is performed on a sand and a deviator stress of 80 psi fails the specimen. Previous tests revealed that the effective friction angle for this sand is 35°. Calculate the pore water pressure at failure.

  Coefficient of curvature for each soil

Determine the effective size as well as the uniformity coefficient and coefficient of curvature for each soil. Determine also the percentages of gravel, sand, silt, and clay according to (a) ASTM, (b) AASHTO, (c)USCS, and (d) the British Standard.

  Determine the length of the tangent of the curve

The proposed highway has two tangents of bearings N 45Degrees 54' 36" E and N 1 Degree 22' 30" W. The highway design engineer, attempting to obtain the best fit for the simple circular curve join these tangents, decides that the external is to be ..

  Determine what is the adiabatic efficiency of the turbine

At the inlet the steam is at 1 MPa and 320 C, and leaves the turbine at 20 kPa. The work output of the turbine is measured to be 600 kJ/kg (of steam passing through the turbine).

  Municipal utility-considering two large-scale conduits

A big municipal utility district is considering two large-scale conduits. The first includes construction of a steel pipeline at a cost of $200 million.

  Consolidation ratio of the soil at the unloaded condition

An increment of vertical stress of150kpa compress the sample to a void ratio of1.43. What is the over consolidation ratio of the soil at the unloaded condition.

  Describe a piece of john deere agricultural equipment

Describe a piece of John Deere agricultural equipment that utilizes GPS hardware and software. Describe how many RECs are placed on the equipment and where it is placed.

  Find and plot initial vertical effective stress distribution

A 35 feet diameter oil storage tank is built on a 100 ft thick soil layer. The tank exerts an uniform pressure of 1000 pcf on the ground surface. The groundwater table is 10 ft below the ground surface.

  Determine the downward deflection of the tray center

A tray rests on an extendible arm consisting of two steel tubes with two different outer diameters. The downward force at the tray center F0 = 1000 N. Determine the downward deflection of the tray center and the tilt angles of the tray about each ..

  Are there any situations when parallel flow option

Are there any situations when parallel flow option may be preferred instead of a counter flow heat exchanger

  What is the isentropic efficiency of the compressor

An adiabatic argon unit compresses argon at 200 kPa and 27C to 2.18 MPa. If the Argon leaves this compressor at 513C. What is the isentropic efficiency of the compressor

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd