What is the net positive suction head

Assignment Help Mechanical Engineering

Reference no: EM13708516

In a chemical plant liquid ammonia is stored in a large tank at 72 degrees F and 200 psig. Ammonia is pumped from this tank to a smaller tank for chemical process usage. The pump used to supply ammonia to the process tank is located 12 ft above the surface of the ammonia in the storage tank. If the frictional losses in the plumbing system leading to the pump are 3.5 ft, what is the net positive suction head (NPSH) available at the pump inlet?

Reference no: EM13708516

Questions Cloud

What horizontal pushing force is required : A 60.3-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.717 and 0.307, respectively. What horizontal pushing force is required

What is the average force exerted by the engine : The 2011 Porsche Turbo S can go from 0 to 60 mph in 2.9 seconds. It can break from 60 to 0 mph in 93 feet. It has a mass of 1590 kg. What is the average force exerted by the engine

Heat is transferred slowly causing the piston to rise : Ten kilograms of water at 15° C and 700 kPa are contained in a cylinder as shown. Heat is transferred slowly causing the piston to rise. Determine the heat transfer and work done if the final condition is saturated vapor. Show the process on a T-v di..

What is the maximum acceleration it can achieve : If half of the weight of a flatbed truck is supported by its two drive wheels, what is the maximum acceleration it can achieve

What is the net positive suction head : In a chemical plant liquid ammonia is stored in a large tank at 72 degrees F and 200 psig. Ammonia is pumped from this tank to a smaller tank for chemical process usage. The pump used to supply ammonia to the process tank is located 12 ft above the s..

Determine the range of x of the projectile : A projectile is thrown down from the edge of a cliff with an initial speed of 30.0 m/s at an angle of 25.0 degree below horizontal. Determine the range of X of the projectile

Write the impulse-momentum equation on the truck : A truck (T) is tied to a car (C), back bumper to back bumper. To you, the viewer, the truck is on the left, and the car is on the right (side view). Both vehicles are at rest. The rope connecting the two is initially slacked. The truck takes off, and..

Determine the x- and y- components of the resultant force : Two forces F1 (60.0 N) and F2 (45.0 N) pull a box sitting on the floor. Makes 15° and 75° relative to the horizontal plane, respectively. Determine the x- and y- components of the resultant force

Gold has an fcc crystal structure : Gold has an fcc crystal structure. The cell parameter (lattice constant) is 0.408 nm. 1) Determine the distance (d-spacing) between the [311] and [111] planes; 2) Sketch the [110] direction in the unit cell and determine the linear density of gold; 3..

User Account

All Pages