What is the mutual inductance of combination of two coils

Reference no: EM13544759

A 10.0 cm -long solenoid of diameter 0.400 cm is wound uniformly with 800 turns. A second coil with 50.0 turns is wound around the solenoid at its center. What is the mutual inductance of the combination of the two coils?

Reference no: EM13544759

Questions Cloud

Current in the circuit to reach half of its maximum value : A 1.80 mH inductor is connected in series with a dc battery of negligible internal resistance, a 0.840 k-ohm resistor, and an open switch. How long after the switch is closed will it take for the current in the circuit to reach half of its maximum..

What is the angular frequency of the charge oscillations : A 18.0 uF capacitor and a 5.40 mH inductor are connected in series with an open switch. The capacitor is initially charged to 6.50 uC. What is the angular frequency of the charge oscillations in the capacitor after the switch is closed?

Explain why the periscope no long works : A periscope for a submarine uses two totally reflection 45°-45°-90° prisms with total internal reflection on the side adjacent to the 45° angles. It springs a leak, and the bottom prism is covered with water. Explain why the periscope no long works. ..

What is the self-inductance of this solenoid : An ideal toroidal solenoid has a cross-sectional area of 0.500 cm^2 , a mean radius of 15.0 cm , and 1600 turns. What is the self-inductance of this solenoid?

What is the mutual inductance of combination of two coils : A 10.0 cm -long solenoid of diameter 0.400 cm is wound uniformly with 800 turns. A second coil with 50.0 turns is wound around the solenoid at its center. What is the mutual inductance of the combination of the two coils?

About the bottom end of rod after being given slight nudge : A thin, cylindrical rodscript l=24.6cmlong with a massm= 1.20 kghas a ball of diameterd=10.00cmand massM= 2.00 kgattached to one end. The arrangement is originally vertical and stationary, with the ball at the top as shown in the figure below. The co..

Calculate the average force exerted on the block : A 10 g bullet moving 1000 m/s strikes and passes through a 2.0-kg block initially at rest, as shown. The bullet emerges from the block with a speed of 400 m/s. (a) (5 pts) How much energy was lost in the collision?

Emf device is placed across two resistors in series : When a 23.0-V emf device is placed across two resistors in series, a current of 14.0 A is flowing in each of the resistors. When the same emf device is placed across the same two resistors in parallel, the current through the emf device is 61.0 A. Wh..

What is the expansion coefficient of the combined rod : An aluminum rod 10.0cm long and a steel rod 80.0cm long are combined to form one rod with a total length of 90.0cm. The initial temperature of both rods is 15 degrees celcius. The expansion coefficient of aluminum is 2.4*10^5 and the expansion coeffi..

User Account

All Pages