What is the mole fraction of propane in the fuel stream

Assignment Help Mechanical Engineering
Reference no: EM13711742

A mixture of propane and butane is fed into a furnace where it is mixed with air. The furnace exhaust leaves the furnace at 343°C, 780.0 mmHg and contains only N2, O2, CO2, and H2O. The partial pressure of O2 in the exhaust is 51.40 mmHg and the partial pressure of CO2 in the exhaust is 62.40 mmHg.

1) What is the mole fraction of propane in the fuel stream?

2) What is the mole fraction of water in the exhaust stream?

3) What is the dew point temperature of the exhaust gas?

Reference no: EM13711742

Questions Cloud

Calculate the wall shear stress : State mathematically Newtona's law of viscosity. Water moves over a flat surface. At a point on the surface the velocity gradient is 60 s-1. The viscosity of water is 0.0012 Ns/m2. Calculate the wall shear stress.
Ideal rankine cycle without feed water heating : Consider a power plant operating on an ideal Rankine cycle without feed water heating. Steam enters the turbine saturated at 1000F at the rate of 5 x10 lbm/H. The turbine exhausts to a surface condenser at 1 psia. The condenser has an overall heat tr..
Reciprocating compressor has been selected to compress : A reciprocating compressor has been selected to compress 0.085 m3/s of 25oC methane gas from 100 to 6200 kPa. Assuming that the heat capacity remains constant at 2433 J/(kg?K) over the temperature range of compression and that the ratio of C  p/C  v ..
Define scope with a work breakdown structure : Define Scope with a Work Breakdown Structure In the previous module, you began to plan for scope by developing a Project Charter and a Project Scope Statement. Now you will continue with Scope Planning by developing a work breakdown structure (W..
What is the mole fraction of propane in the fuel stream : A mixture of propane and butane is fed into a furnace where it is mixed with air. The furnace exhaust leaves the furnace at 343°C, 780.0 mmHg and contains only N2, O2, CO2, and H2O. The partial pressure of O2 in the exhaust is 51.40 mmHg and the part..
The project management body of knowledge : Revise all components of your project plan based on the feedback you have received from your professor throughout the course. Add a summary of the changes you have made based on feedback to the end of your plan, and explain why some suggested c..
The mole fraction of water vapor in air-the molal humidity : If the weather report says that it is 60°F outside, the barometric pressure is 28.50 in Hg, and the relative humidity is 85.0%, find the following values. The partial pressure of water. The mole fraction of water vapor in the air
Demonstrate about effect of poor project screening method : What does this case demonstrate about the effect of poor project screening methods on a firm's ability to manage projects effectively? How would project portfolio management help to improve the situation at Keflavik?
Write down the transfer function of a third-order system : Write down the transfer function of a third-order system with unity steady-state gain which has a real pole at s = -1 and a pair of complex poles at s = -1 +- ja. Simulate the open-loop step response of the system for 'a' values of 1, 2, 4, and 10, a..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A thin metal plate is insulated on the back and exposed to

a thin metal plate is insulated on the back and exposed to solar radiation on the front surface. the exposed surface of

  The ball is in contact with the racket for 310 if the

a tennis racket hits a tennis ball with a force of where 1130 470 and is the time in milliseconds. the ball is in

  If the velocity varies linearly from one plate to the other

consider two flat plates seperated by a distance of 0.25 in. in this application castor oil is used as a lubricant. the

  Determine the specific enthalpy of the refrigerant at entry

A Rankine cycle power plant is being developed to operate an irrigation system. In this power plant solar energy will be used to boil a low boiling point fluid within glazed flat plate solar collectors. The working fluid that has been selected is the..

  Determine the acceleration of the cart if the man exerts a

a man pulls himself up the 15o incline by the method shown. if the combined mass of the man and the cart is 100 kg

  Roast can be considered as a spherical shape and it is

a 5-lb roast initial at 70degf is placed in an oven at 350degf. you may assume the heat transfer coefficient is 2.5

  The measured heat loss from the turbine is 300 btus neglect

steam enters a 10000 hp turbine at 1600 lbfin2 and 1400 f and exits 10 lbfin2 and a quality of .9. the measured heat

  The convective heat-transfer coefficient for wood to still

a cold-storage room is maintained at -18degc. the internal dimensions of the room are 5 m x 5 m x 3 m high. each wall

  The wheel in fig 10-27 has eight equally spaced spokes and

the wheel in fig. 10-27 has eight equally spaced spokes and a radius of 30 cm. it is mounted on a fixed axle and is

  Determine the time duration t of the elevator run

The main elevator A of the CN Tower in Toronto rises about 349 m and for most of its run has a constant speed of 22 km/h. Assume that both the acceleration and deceleration have a constant magnitude of g/3 and determine the time duration t of the ..

  Determine the new differential reading along the inclined

determine the new differential reading along the inclined leg of the mercury manometer of the figure if the pressure in

  An electric motor drives a propeller inside the tank until

a closed well insulated tank contains 10 kg of air at 300 k. an electric motor drives a propeller inside the tank

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd