What is the max tensile force that could be applied to steel

Assignment Help Civil Engineering
Reference no: EM13305262

a rectangular piece of steel is 10" wide by 60" long by 3" deep, what is the max tensile force that could be applied to the steel, and what is the total elongation of the steel?

Reference no: EM13305262

Questions Cloud

Estimate the maximum number of cars per hour as a function : Estimate the maximum number of cars per hour that can travel down two lanes of a highway as a function of speed (ie at 50, 60 , and 70 mph) .for safety purposes the cars must be spaced one car length apart for each 10 mph they are traveling.
Obtain the density of the solvent : A cylindrical storage tank has a radius of 1.20 m. When filled to a height of 3.66 m, What is the density of the solvent
Duarte is a manufacturer of high-end springs used by major : You're the sole owner of Duarte Spring Company; you paid $200K for the business when you acquired the firm five years ago. Duarte is a manufacturer of high-end springs used by major aerospace and aircraft manufacturing companies.
Determine the maximum value of the tension force in string : a mass m is attached to a string of length l and released when the string is horizontal, causing the mass to fall in a circular path. determine the maximum value of the tension force in the string
What is the max tensile force that could be applied to steel : a rectangular piece of steel is 10" wide by 60" long by 3" deep, what is the max tensile force that could be applied to the steel, and what is the total elongation of the steel
The profit-maximising - loss minimising rule : Explain to him fully the profit-maximising/loss minimising rule within the context of a perfectly competitive market structure and how the profit-maximising/loss minimising rule may be applied under the three (3) scenarios viz. economic profit, norma..
The expected return on the market stays : Suppose that the Treasury bill rate is 5% rather than 3%. Assume that the expected return on the market stays at 12%. Use the following information.
Determine what is the uncertainty in meters in the distance : A laser range finder consists of a laser and a light receiver. It operates by bouncing a laser pulse off a mirror and measuring the time of flight, the time it takes for the pulse to leave the laser, bounce off the mirror and return to the receive..
How much energy is lost while the skier slides down incline : a skier of mass m is standing on a slope with an angle of elevation ø. After being given a tiny nudge, the skier slides down the slope, how much energy is lost while the skier slides down the incline

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate the pressure change over 80 m of pipeline

Water at 20ºC flows at a velocity of 2 m/s in a 200-mm diameter horizontal ductile-iron pipe. a) Estimate the friction factor in the pipe, and state whether the pipe is hydraulically smooth or rough.

  Determine what is the maximum water hammer pressure

0.5 m-diameter concrete pipe (5.0 cm rigid wall thickness with rigid pipe walls) carries water 600m before discharging into another reservoir. The surface elevation of the downstream reservoir is 55 m lower than the supply reservoir.

  Total expansion and total bleeding in term of percentage

To avoid shrinkage cracks in the grout, what should be the total expansion and total bleeding in term of percentage for the grout?

  What depth of aggregate is needed if angle theta is 40degree

A 2000-lb wheel load is to be supported by aggregate over soil with a maximum bearing pressure of 1000 lb/sqft. What depth of aggregate is needed if the angle theta is 40 degrees

  Determine tension in cable be and the reactions at a and d

A light bar AD is suspended from a cable BE and supports a 50-lb block at C. The ends A and D of the bar are in contact with frictionless vertical walls. Determine the tension in cable BE and the reactions at A and D

  Equal-tangent crest vertical curve

An equal-tangent crest vertical curve is designed with a PVI at station 110+00 and a PVC at station 107+43.3. if the high point is station 110+75.5 what is the design speed of he curve?

  What is the maximum step height

An open rectangular channel is 50 feet wide, flowing at a depth of 5 feet, and is carrying 1000 cubic feet per second. What is the maximum step height than can be placed into the flow without disturbing the upstream depth, without acting as a chok..

  How man n of water must be added to the sample to increase

A moist soil sample weighing 22.2 N has a moisture content of 20%. How man N of water must be added to the sample to increase the moisture content to 30%

  Determine the value of po

Determine the value of Po, as a funciton of H, for these two investment alternatives to be equivalent at an interest rate of i=15% per year.

  Tighten the packing on a leaking argon valve

A worker needs to enter a confined space to tighten the packing on a leaking argon valve. Describe two procedures that could be used to isolate the argon line and valve prior to starting work.

  What runoff volume will show up in nearby stream to baseflow

If a watershed of drainage area 100 mi^2 has abstractions of 2.5 in/hr, what runoff volume will show up in the nearby stream in addition to baseflow for a rainfall of 5-hr duration with an intensity of 4 in/hr

  Compute the distance when the traffic signal turns red

A driver with his passenger vehicle is driving at 35 mph, when the traffic signal in front of him changes to yellow. He is 100 feet from the intersection when he applies the brakes after a 1-second reaction time.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd