What is the major head loss in a coarse concrete pipe with

Assignment Help Civil Engineering
Reference no: EM13560452

1.What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm

2.The power, P, required by an agitator in a tank is a function of the following variables, diameter of the agitator, D, Frequency of the impeller rotation, w (1/s), Viscosity of liquid, u (lbss/ft^2) and the density of the liquid ,p (slugs/ft^3) Determine the appopriate set of Pi terms.

Reference no: EM13560452

Questions Cloud

Which alloy and in what condition whould you choose : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender
For a concrete column that is part of a braced frame : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender. Assume that at one end of the column a clockwise moment of 100 k-ft is present
Which cross section option will provide the highest flow : Two channel cross sections are proposed. Assume slope, cross sectional area, and surface type are constant for each channel. Which cross section option will provide the highest flow rate? Show calculations.
What is the major head loss in a coarse concrete pipe with : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm
What is the major head loss in a coarse concrete pipe with : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm
Classify the column as slender or non slender : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender
Calculate the hydraulic loading and the organic loading : A two-stage trickling filter plant treats 291.7 m3/h of municipal wastewater that has a BOD5 of 200 mg/L. The two filters have equal dimensions (depth = 1.68 m; diameter = 21.3 m), and each has a recycle ratio of 1.0. If the primary clarifier removes..
Does the cyclist need to produce to maintain a speed of 20 m : A bicyclist travels on a level path. The frontal area of the cyclist and the bicycle is 2.3 ft^2 and the drag coeffcient is 1.2. The specific weight of the air is .075lb/ft^3. How much horsepower (1hp=550ft*lb/s) does the cyclist need to produce to m..
Calculate the size of an anaerobic digester required : Calculate the size of an anaerobic digester required to treat the sludge from a primary clarifier designed to treat 38,000 m3/d of sewage. The quantity of dry volatile solids removed by the plant is 0.15 kg dry solids/m3 sewage. The sludge contains 9..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Define the control variables and formulate the mathematical

No more than 12 units of TV, 40 units of radio and 25 units of direct mail are available. A minimum of 9 units of radio and 5 units of direct mail must be purchased.

  Design a needle-punched nonwoven geotextile for use

The thickness of geonet is 0.2 inch (5 mm). Assume the maximum inflow rate is 0.14 inch/hour. The liquid head over the geomembrane liner is 2 inches. The index properties of the soil placed over the geotextile are as follows

  What is the volume and base diameter of the resulting

Soil falls from a conveyor belt into a cone shaped pile at a rate of 1000lb/min. The bulk density of the soil is 110lb/ft^3. The height of the pile is equal to the base diameter

  Determine the net power delivered to the generator

Air enters the compressor at 98 kPa and 295 K at a rate of 10 kg/s and exits at 1 MPa and 620 K. Determine the net power delivered to the generator by the turbine.

  What is the percent yield

Carbon disulfide (CS2) reacts with excess chlorine (Cl2) to produce carbon tetrachloride (CCl4) and disulfur dichloride (S2Cl2). If 69.7 g of CS2 yields 62.6 g of CCl4, what is the percent yield? (Hint, you must first write the balanced equation.)

  List the advantages of compressed natural gas

List the advantages and disadvantages of the following alternative fuels: ethanol, methanol, biodiesel, compressed natural gas, and liquid petroleum gas.

  Determine the speed of the bag as it hit the ground

If the bag is released with the same upward velocity of 6m/s when t=0 and hits the ground when t-8 seconds, determine the speed of the bag as it hit the ground and altitude of the balloon at this instant (t=8s).

  Calculate the coefficient of permeability

A permeability test was run on a cylindrical soil sample with a length of 175 mm, and a diameter of 75 mm. After 90 seconds, discharge was 300 cm3 under constant head of 41 cm. The sample had a dry mass of 850 g and its ?s was 2.60 g/cm3. Calculate (..

  Determine the time needed to reach an acceleration

A car moves around a curved path that has a radius of 375 feet. While moving around the arced path, the car increases speed by 1.15 ft/s^2. If the car starts from rest, determine the time needed to reach an acceleration of 5.5 ft/s^2.

  Determine the depth of flow immediately upstream of the hump

A rectangular channel of 2 m depth and 5 m width carries 1 m deep running water. It is laid to a slope of 0.001 with Manning’s n = 0.02. Some distance downstream there is a hump of height 0.5 m on the stream bed

  Determine minimum diameter required for a solid drive shaft

The engine of an automobile supplies 180 hp at 2500 rpm to the drive shaft. If the maximum shearing stress in the drive shaft must be limited to 6 ksi, determine the minimum diameter required (in inches) for a solid drive shaft.

  What size pipe should be used from a ground storage tank

Water flows from a ground storage tank that is 450 feet above a town's water distribution system. The pressure at the entrance of the system must be at least 75 psi and the demand is 1350 GPM.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd