What is the mach number of the flow around the aircraft

Assignment Help Civil Engineering
Reference no: EM13302364

A jet aircraft flies at a speed of 600 mph at an altitude of 40,000 ft. The atmosphere is the standard atmosphere. (1) What is the air pressure outside the aircraft? (2) What is the Mach number of the flow around the aircraft?

Reference no: EM13302364

Questions Cloud

Case study: mortgage application : Case Study: Mortgage Application
Determine the torque required to rotate the cylinder : A 25-mm-diameter shaft .5 m long is pulled through a cylindrical bearing. The lubricant that fills the 0.3-mm gap between the shaft and bearing is an oil having a kinematic viscosity of 8.0 × 10-4 m2/s and a specific gravity of 0.91.
What is the speed of the wave pulse : A wave pulse travels down a slinky. The mass of the slinky is m = 0.85 kg and is initially stretched to a length L = 6.5 m. What is the speed of the wave pulse
What is the future value of the annuity (ordinary) : You have $50,000 in your bank account. You plan to save $5,000 at the end of each year for the next 10 years. The interest rate is 8% per annum, compounded monthly. What is the future value of the annuity (ordinary)?
What is the mach number of the flow around the aircraft : A jet aircraft flies at a speed of 600 mph at an altitude of 40,000 ft. The atmosphere is the standard atmosphere. (1) What is the air pressure outside the aircraft (2) What is the Mach number of the flow around the aircraft
Explain the higher of the two spots during tlc analysis : Ferrocene eluted from the column first and acetylferrocene second, but ferrocene ended up as the higher of the two spots during TLC analysis. Explain.
Products and services different : In what way are products and services different?
Compare and contrast the formula resulting from each theory : If given a brittle material with a known tensile strength, Sut, and a known compressive strength, Suc, use the four main fracture criteria (MNSC, BCM, MM, and MIIM) to determine the shear stress, tau, in terms of the material properties Sut and Su..
Mgt-660 capstone project overview : 1.Describe the preferred timing and objectives of your business plan. Include an Excel spreadsheet with critical decisions and dates.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Explain the difference between piezometer and tensiometer

Briefly explain the difference between piezometer and tensiometer with respect to the working principle, special design consideration and limitation of the instrument.

  Find the flow rate per unit thickness for a section midway

Two piezometers are located 1000 ft apart with the bottom located at depths of 50 ft and 350 ft, respectively, in a 400-ft-thick unconfined aquifer. The depth to the water table is 50 ft in the deeper piezometer and 40 ft in the shallow one.

  Compute moment of the force about a line through origin

The force F = 90i + 60j + 20k acts at the point (0,0,40). Compute the moment of the force about a line through the origin that has direction cosines (1/sqrt(3), 1/sqrt(3), 1/sqrt(3), 1/sqrt(3)).

  Design a series of closely spaced parallel box beams

Design a series of closely spaced parallel box beams that will support an asphalt road surface over a 10 foot wide, 40 foot long span. The hollow box beams are made of concurred and imbedded No. 8 steel rods (1 inch dia.).

  Determine deviation at the top of trajectory caused by wind

A fireworks shell is launched vertically from point A with speed sufficient to reach a maximum altitude of 500ft. A steady horizontal wind causes a constant horizontal acceleration of 0.5ft/sec^2, but does not affect the vertical motion.

  Difference between dry and moist lapse rate

Explain how the desert air can contain much more h 2 o vapor in the air than the pole, and still a lower humidity than the pole? what causes the difference between dry and moist lapse rate?

  Determine the station where tangent runout starts

The station of a PI of a horizental curve is 60+20. The horizental curve has a degree of 4 and a length of 400ft. the othere given design perameters include. Superelevation runoff rate is 1/400. width of the pavement is is 15ft.

  What is the minimum distance from the stalled car

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

  Determine the mass flowrate through boiler

The inlet of loe pressure turbine is 500Kpa and 500°C. Condenser operates at 10 Kpa. Determine the mass flowrate through boiler needed to produce 5000KW of power.

  Use activity coefficients estimated from ionic strength

The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2? [Use activ..

  Which machine should be chosen using an interest rate

North City must choose between two new snow-removal machines. The SuperBlower has a $70,000 first cost, a 20 year life, and an $8000 salvage value. At the end of 9 years , it will need a major overhaul costing $19,000.

  Determine the cod

Determine the COD, carbonaceous BOD, and nitrogenous oxygen demand of a 100 mg/L solution of urea (N2H4CO)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd