What is the lowest gear reduction ratio

Assignment Help Civil Engineering
Reference no: EM131218432 , Length: 2

A rear-wheel-drive car weighs 3600 lb, has 15-inch radius wheels, a driveline efficiency of 95% and an engine that develops 520 ft-lb of torque. Its wheelbase is 8.2 ft and the center of gravity is 18 inches above the road surface and 3.3 ft behind the front axle.

What is the lowest gear reduction ratio that would allow this car to achieve the highest possible acceleration from rest on good, dry pavement?

Reference no: EM131218432

Questions Cloud

Provide one paragraph that analyses on literary device : Provide one paragraph that analyses on ( literary Device / Rhetoric Device) . http://www.cnn.com/2016/09/20/opinions/worst-election-ever-ruiz/index.html
General motors and the ignition switch recalls : Analyze the case in this in the given direction, please include the following concept as it relate to General Motors in the case analysis.
Pv of the aftc : Your model should show the before tax and after tax cash flows as well as the PV of the AFTC in each year and of course the NPV, which is the final solution. Your submission should include the model in ready to use clean version and a completed mo..
Value of actual unemployment rate : When actual GDP is above natural real GDP, is the value of actual unemployment rate above, below, or equal to the natural unemployment rate?
What is the lowest gear reduction ratio : What is the lowest gear reduction ratio that would allow this car to achieve the highest possible acceleration from rest on good, dry pavement?
Describe resources that will be needed to implement : Describe resources that will be needed to implement the school vision. Analyze data (i.e. surveys, observation) representing the diverse interests, viewpoints, and needs of stakeholders.
Tax from all level of government : What rate of income tax from all level of government is currently in place in United States?
Identify actor in microenvironment who affected the target. : Identify four actors in the microenvironment that haveaffected Target's performanceoverthe past few years. Describe how economic and cultural factors affected Target's marketing strategy during the economic downturn.
Is the article well-written and easy to understand : What are the key points/facts presented in the article? What are the conclusions and recommendations? Is the article useful? Why or how? Is the article well-written and easy to understand?

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the angular velocity of the pendulum immediately

A pendulum consists of a slender rod, AB, of weight Wr= 8.60 lb and a wooden sphere of weight Ws= 21.7 lb .(Figure 1) The length of the rod is d = 7.70 ft and the radius of the sphere is R = 0.500 ft

  Find the minimum speed at which the train could pass over

Steam locomotives require water at such rates that the storage tank behind the locomotive was refilled at 100 mile interverals. one technique used was to place a long tank between the rails and the water the water would be scooped up as the locomotiv..

  Determine the bulk modulus of elasticity of a liquid

Determine the bulk modulus of elasticity (in N/m^2) of a liquid that has a 1.10 percent volume decrease because of an increase in pressure from 1,000 N / cm^2 to 11,000 N / cm^2.

  Plot ground level concentration of sulfur dioxide as functn

Plot the ground level concentration of sulfur dioxide as a function of distance from the stack and determine the maximum ground level concentration at both with and without air pollution control and the distance from the stack where the maximum co..

  Determine how much would expect to win from the game

You and your friend go into sports bar where a dart throwing competition is going on.you buy m darts at 1 dollar each.you throw these m darts at the board.Of these, N darts hit within the inner circle.

  Determine thethickness of the water layer under the runners

A sled with two runners slides along a thin horizontal layer ofwater between the ice and the runners. The horizontal force thatthe water puts on the runners is equal to 1.2 lb when the sled'sspeed is 30 ft/s.

  Determine the maximum stress and strain in the ball

A rubber ball is inflated to a pressure of 65kpa. At that pressure, the diameter of the ball is 240 mm and the wall thickness is 1.25 mm.The rubber has a modulus of elasticity E of 3.6 MPa and a poisson's ratio of 0.48.

  Draw thermal circuit of heat flow from center of pipe to t

Steam at 100 psia, sat vapor is in a pipe. The pipe is schedule 40 steel with a wall thickness of 1/8 inch and a length of 100 ft. The outside air temperature is 40 degrees Fahrenheit. The mass flow of steam is 4,000 lb/hr.

  Does the spring force increase or decrease and by how much

If the temperature of the flashlight increases to 120oF, does the spring force increase or decrease and by how much. Take the casing wall to have an outer diameter of 1.5 in., thickness 0.125in.,length L = 3 in., and elastic modulus of 300ksi.

  Determine flow rate of water that will cause a pressure drop

Determine the flow rate of water (20 degrees celcius) that will cause a pressure drop of 17250 N/m^2 in 350m of horizontal, cast-iron pipe (d=60cm). assume minor losses are negligibe

  Determine the moisture content of product leaving the dryer

The tunnel is supplied with 1500 kg dry air/h at 50°C and 10% RH, and the air leaves at 25°C in equilibrium with the product at 50% RH. Determine the moisture content of product leaving the dryer and the final water activity.

  What is the largest rectangular interior room that can be

Matt is building a stand made out of mud bricks ( ultimatecompressive strength approximately 100 psi and density 250lbs/cubit foot) in the shape of a tent

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd