What is the length of a 200 ft. steel tape having a cross

Assignment Help Civil Engineering

Reference no: EM13562632

What is the length of a 200 ft. steel tape having a cross-sectional area of 0.004in2 and a modulus of elasticity of 30,000,000 lb/in2 that is standardized at a tension of 20 lb and a temperature of 68°F if it is pulled at a tension of 33 lb at 95°F? The tape weight is 0.02 lb/ft and is only supported at the ends.

Reference no: EM13562632

Questions Cloud

Find the dynamic and kinematic viscosity of kerosene : Find the dynamic and kinematic viscosities of kerosene, SAE10W-30 motor oil, and water at a temp of 38C (100F)

Obtain the time variable effluent concentration when : For a CSTR, obtain the time variable effluent concentration when the decay rate is zero order. You need to obtain the defining ODE, integrate it and use the initial condition to do this. Then get the steady state solution for this case and solve it ..

Find the vertical reactions and construct the complete shear : A 16-ft [4.88 m] span beam is fixed at one end and simply supported at the other end. A single concentrated load of 9600 lb [42.7 kN] is placed at the center of the span. Find the vertical reactions and construct the complete shear and moment diagram..

What volume of ambient air was compressed : When the ambient air is at 70 degrees Fahreneit, 14.7 psia, and contains 21% oxygen by volume, 4.5 lb of air are pumped into a scuba tank, capacity 0.75 ft^3. What volume of ambient air was compressed?

What is the length of a 200 ft. steel tape having a cross : What is the length of a 200 ft. steel tape having a cross-sectional area of 0.004in2 and a modulus of elasticity of 30,000,000 lb/in2 that is standardized at a tension of 20 lb and a temperature of 68°F

Determine the volume of the spherical tank to be used : A spherical tank is being designed to hold 7 moles of methane gas at a pressure of 8 bar and a temperature of 50oF. Determine the volume of the spherical tank to be used.

What will be the surface tension effects if the tube were : A water column in a glass tube is used to measure the pressure in a glass pipe. The tube is 1/4 in. in diameter how much of the water column is due to the surface tention effects? What will be the surface tension effects if the tube were 1/8 in. or 1..

What is the ratio of the density of water to the density : At a temperature of 100oC and an absolute pressure of 8 atmospheres, what is the ratio of the density of water to the density of air?

Calculate the total mass emissions of particulates out : The temperature in the stack is 350 degrees F and the pressure is 725 mm Hg. If the total flow rate of gas out of the stack is 200 standard cubic meters per second, calculate the total mass emissions of particulates out of the stack in kg/day.

User Account

All Pages