What is the force the left support exerts on the beam

Assignment Help Physics
Reference no: EM13546674

A gymnast with mass m1 = 49.0 kg is on a balance beam that sits on (but is not attached to) two supports. The beam has a mass m2 = 119.0 kg and length L = 5.0 m. Each support is 1/3 of the way from each end. Initially the gymnast stands at the left end of the beam.

1) What is the force the left support exerts on the beam?

2) What is the force the right support exerts on the beam?

3) How much extra mass could the gymnast hold before the beam begins to tip? Now the gymnast (not holding any additional mass) walks directly above the right support.

4) What is the force the left support exerts on the beam?

5) What is the force the right support exerts on the beam?

Reference no: EM13546674

Questions Cloud

What total cylinder length l is required for the platform : The floating platform shown is supported at each corner by a hollow sealed cylinder 1 m in diameter. The platform itself weights 30kN in air, and each cylinder weighs 1.0 kN per meter of length
What force is applied to the lid : A 22.5 cm screwdriver is used to pry open a can of paint. If the axis of rotation is 2.29 cm from the end of the screwdriver blade and a force of 79 N is exerted at the end of the screwdriver’s handle, what force is applied to the lid? Answer in unit..
What is the total mechanical energy of the oscillator : Consider a simple pendulum with L = 2.4 m and m = 1.8 kg. Suppose the mass is initially at rest at the lowest point on its trajectory when it is given an impulse such that it then has a velocity of 0.17 m/s. What is the total mechanical energy of the..
Maximum mass sign that can be hung from the beam : A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.9 kg and the sign has a mass of ms = 15.4 kg. The length of the beam is L = 2.57 m. The sign is attached at the very end of the beam, but the horizontal wire h..
What is the force the left support exerts on the beam : A gymnast with mass m1 = 49.0 kg is on a balance beam that sits on (but is not attached to) two supports. The beam has a mass m2 = 119.0 kg and length L = 5.0 m. Each support is 1/3 of the way from each end. Initially the gymnast stands at the left e..
Determine the flow discharge in the canal : A trapezoidal canal with a bottom width of 1.5m, a side slope Z=1, has a longitudinal slope of 0.4% and n=0.025. If the water depth in section 1 is 1.52 m and in section
What is the magnitude of the frictional force on the sphere : A solid sphere of uniform density starts from rest and rolls without slipping down an inclined plane with angle ? = 30.0o. The sphere has mass M = 8.0 kg and radius R = 0.19 m . The coefficient of static friction between the sphere and the plane is ?..
String routes through a hole in the center of the table : A 0.8 kg mass is moving in a circle of radius 1.5 m on a flat frictionless table at the end of a string. The speed of the mass is 3 m/s. The string routes through a hole in the center of the table and is held by you underneath the table.
Compute the settlement resulting from primary consolidation : A 3-m-thick, wide fill (γ = 19 kN/m3) is placed over a soil profile consisting of 6 m of plastic clay (γ = 16 kN/m3, e0, = 1.7, Cc, = 1.2, OCR= 1.4, Cr/Cc, = 0.15) over 10 m of organic silt

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd