What is the force if the fire fighter is running towards

Assignment Help Civil Engineering
Reference no: EM13561628

The water exiting a 2.5 cm diameter nozzle which is atrtached to a 7.6 cm diameter fire hose is discharged at a velocity of 25 m/s. the pressure in the hose is 380 kpa. what is the magnitude and direction of the force of the water n the nozzle, if the nozzle is held steady/

2- What is the FORCE if the fire fighter is running towards the fire, with the hose at a velocity of 1.5 m/s

Reference no: EM13561628

Questions Cloud

What will be the steady-state effluent concentration : A water treatment plant treats a continuous flow rate of 50,000 m^3/day and plans to build a 10,000 m^3 tank to house an additional treatment process. The reaction occurring in the tank will remove nitrate according to first order decay with a rate o..
Determine that a building solution complies with performance : In accordance with BCA, what are the assessment methods and how may they be used to determine that a building solution complies with the performance requirements?
How many square feet of compacted cy are placed per hour : Earth whose in situ weight is 110 lb per cf and compacted weight is 124 lb per cf is placed ina a fill at rate of 280 cy per hr, measured as compacted earth. The thickness of the compacted layers is 8 in
Compute the coefficient of permeability of the soil in : Standard air is drawn from the atmosphere into a 1.25 m diameter cylindrical duct by a fan mounted inside the duct. This air is discharged down stream from the fan through a 0.6 m diameter duct at a velocity of 25 m/s and atmosphere pressure.
What is the force if the fire fighter is running towards : The water exiting a 2.5 cm diameter nozzle which is atrtached to a 7.6 cm diameter fire hose is discharged at a velocity of 25 m/s. the pressure in the hose is 380 kpa. what is the magnitude and direction of the force of the water n the nozzle, if th..
Determine the hydraulic conductivity of the sand : The maximum dry density determined in the laboratory for a quartz sand is 1800 kg/m^3. In the field, if the relative compaction is 90%, determine the hydraulic conductivity of the sand in the field compaction condition
What horsepower must be delivered to the wheels : An automobile has been designed to maintain a constant speed of 55 mph on a +5% grade. The weight of the vehicle when fully loaded is 6000 lbs. What is the total resistance in still air of this vehicle? What would be the resistance on a level road? W..
Determine whether the resultant force acts within the kern : A 5 ft square, 2 ft. deep spread footing is subjected to a concentric vertical load of 60 k and an overturning moment of 30 ft-k. that acts at a 45 degree angle from the side of the footing
Determine the amount of steam added to the air : Air at 14.7 psia, 55*F, 60 percent relative humidity is first heated to 72*F in a heating section and then humidified by introducing water vapor. The air leaves the humidifying section at 75*F and 65 percent relative humidity.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the total bulb power in w total bulb power lost as heat

Where: Q is the amount of energy added (joules) M is the mass of the fluid (kg) C (subscript p) is the heat capacity of the fluid (joules/kg/K), and Delta T is the change in temperature (K or C degrees) A garage (24 ft x 24 ft x 10 ft) is illuminated..

  Determine the error n in replacing the sine and the tangent

Determine the % error n in replacing the sine and the tangent of an angle by the value of the angle in radians for angle values 5,10,20 degrees. Explain the qualitative difference between the sine and tangent results.

  Estimate the minimum absolute pressure causing cavitation

When a fluid flows through a sharp bend, low pressures may develop in localized regions of the bend. Estimate the minimum absolute pressure (pmin in psi) that can develop without causing cavitation if the fluid is water at 80 oF.

  What is the work done by the air in the cylinder

A piston cylinder is initially at a state of 60c, 200kpa. Heat is added to the system from 500c reservoir until the final pressure is 400kpa. the mass of the air is 2kg, the spring constant is 1000kn/m and the cross sectional area of the piston is..

  What concentration of ozone should be injected

Ozone is sometime used as a disinfectant for drinking water. Ozone is highly reactive it will react benign species found in water, as well as the pathogens it is intended to kill.

  Hat is the probability that more than 2.5 inches

what is the probability that less than 0.5 inches of precipitation will occur in any January? What is the probability that more than 2.5 inches wil

  What is the magnitude and direction of the resultant force

Water under a gage pressure of 65 psi flows with a velocity of 12.5fps through a right-angled bend that has a uniform diameter of10in. The bend lies in a horizontal plane

  Calculate the mean-standard deviation and the coefficient

during construction of the surface layer of asphalt pavement, two samples where taken everyday to measure the asphalt content in the mix to ensure that it is within the specification limits. the target value was set at 5.5 percent with a tolerance..

  Determine the rise in liquid level for oil water system

The density of oil is 0.7 g/cc, the density of water is 1.0 g/cc, the radius of capilary is 0.008 cm, the contact angle through water is 58, the interfacial tension is 50 dynes/cm. Calculate the height in cm

  Draw the cross sections and compute ve

The pressure inside a 4cm hose is 700 kPa. If water exits through a 2 cm diameter nozzle, what velocity m/s, can be expected inside the hose?

  Briefly explain reason for variation of water coefficient

A homogeneous coarse sand deposit has a water table at 10 m depth. The water coefficient of permeability of the sand is found to vary significantly with height above the water table even though the sand deposit is homogeneous.

  Determine the normal and friction forces acting on each side

The photograph shows two U.S. Coast Guard icebreakers in an ice field, and a simple model for an ice breaking operation. If the coefficients of static and kinetic friction

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd