User Account

All Pages

What is the final temp and the final mass of air in the tank

Assignment Help Civil Engineering
Reference no: EM13298188

an insulated tank is evacuated. Air from the atmosphere at 12 psia and 70 degrees farenheight is allowed to flow into the 100 cubic foot tank. What is the final temp and the final mass of air in the tank just after flow ceases.

Reference no: EM13298188

Questions Cloud

Predict the temperature required in an isothermal plug flow : Using the method of Lee et al., predict the temperature required in an isothermal plug flow incinerator to reduce the xylene level in a waste gas from 100 ppm to 10 ppm. Assume a residence time of 0.7 sec.
What is the focal length of the borrowed glasses : A person is nearsighted and can clearly focus on objects that are no farther than 2.6 m away from her eyes. What is the focal length of the borrowed glasses
Calculate specific internal energy of water leaving valve : Water is at 9000 kPa and 300 degrees celcius and flows through a partially open valve. Pressure immediately after the valve is measured to be 600 kPa. Calculate the specific internal energy of the water leaving the valve
Compute the uncertainty in the position of a proton : Using Heisenberg's uncertainty principle, calculate the uncertainty in the position of a proton moving at a speed of 4.70 +- .01*10^4.
What is the final temp and the final mass of air in the tank : an insulated tank is evacuated. Air from the atmosphere at 12 psia and 70 degrees farenheight is allowed to flow into the 100 cubic foot tank. What is the final temp and the final mass of air in the tank just after flow ceases.
Determine the size of the image of the tree on your retina : Your eye (diameter 2.5 cm) is able to focus the image of a tree on your retina. What is the size of the image of the tree on your retina
What is the direction of current flow : The rectangular metal loop in following figure has a resistance of 2? except the 0.5W, 0.1A bulb attached to it. What is the direction of current flow
Explain dehydrohalogenation of 2-bromo-2 : dehydrohalogenation of 2-bromo-2,3-dimethylbutane with a strong base can lead to multiple products with the zaitsez product being the favored product. what is this product.
Determine what external force is required to hold the bend : A pipe 1ft in diameter bends through an angle of 135 degrees. The velocity of flow of gasoline ( S = 0.8) is 20ft/s and the pressure is 10psig in the bend. What external force is required to hold the bend against the action of the gasoline

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculating largest tolerable internal crack length

Calculate the largest tolerable internal crack length for a 7075-T651 aluminum alloy component that is loaded to a stress one-half of its yield strength without catastrophic fracture.

  Determine what the height should be to force to be critical

Given that uniform flow is subcrital and there is a weir in a rectangular channel, how do you determine what the weir height should be to force the flow to be critical. Draw this transition on a specific energy curve.

  What is the pressure head

Water in a pip has a pressure of 22.1 lb/ft2. What is the pressure head?

  What will the freeway density

What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged)

  Explain what criteria are used in the selection of personnel

What criteria are used in the selection of personnel for the demonstration of maintenance tasks? Define the criteria for the selection of test and support equipment.

  Approximate amount of the quarterly payment

A college student borrows $1500 during his senior year. The loan is to be repaid in 20 equal quarterly installments. The interest rate is 5% per year with the first payment to be made 3 years after the date of the loan. What will be the approximat..

  Determining pressure in a coal mining dragline

The total flow then moves to a point W on the traction drive two metres off the ground, and travels through a nine millimetre diameter conduit. Ignoring all friction and minor losses, determine the pressures at points H and W.

  Quartzite sample in a compression testing machine

A quartzite sample in a compression testing machine is 180mm long and 54mm in diameter. what is the stress under a load of 100kN? if the modulus of elasticity is 102kN/mm2, find the strain develope in the sample.

  What is the angle of inclination of the plane

A body slides down a frictionless plane and during the third second after starting from rest if it travels 20.4m. What is the angle of inclination of the plane?

  Estimate the storage change for the lake during the month

A lake with a surface area of 1050 acres was monitored over a period of time. During a one month period, the inflow was 33 cfs, the outflow was 27 cfs, and a 1.5 in seepage loss was measured.

  Find out the magnitude of the contraction scour

Bridge scour, Determine the magnitude of the contraction scour depth given the following information about the channel and bridge

  Design a horizontal curve with a 40-degree central angle

Design a horizontal curve with a 40-degree central angle (delta=40) for a two-lane road with 11-ft lanes. The design speed is 70 mi/h and superelevation is limited to 0.06ft/ft. Give radius, degree of curvature, and length of curve.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd