What is the expected battery life for electric garden tool

Assignment Help Electrical Engineering
Reference no: EM13275281

A portable electric garden tool uses a 11 volt rechargeable battery pack with a rated capacity of 2.1 amp-hours. If the tool is used with a continuous power output of 0.2 horsepower, what is the expected battery life?

Reference no: EM13275281

Questions Cloud

Estimate the tension in the rope : A small object with a mass of m = 808 g is whirled at the end of a rope in a vertical circle with a radius of r = 128 cm. determine the tension in the rope
Define and write a net ionic equation for the reaction : Write a net ionic equation for the reaction that occurs when excess hydrobromic acid (aq) and iron(II) sulfide (s) are combined. Include states
Draw an asm chart for a computer that has three instructions : Draw a block diagram for a datapath that contains: an 8-word, three-port register file; an ALU that accepts operands either from the datapath or from an external source; and a shifter that shifts the A operand from the register file before it goes..
Determine the average force on the bullet : A 7.57- g bullet is moving at 689.00 m/s as it leaves the 0.63- m-long barrel of a rifle. What is the average force on the bullet
What is the expected battery life for electric garden tool : A portable electric garden tool uses a 11 volt rechargeable battery pack with a rated capacity of 2.1 amp-hours. If the tool is used with a continuous power output of 0.2 horsepower, what is the expected battery life
Determine the average power dissipated by the loop : A current with sinusoidal time-dependence, whose peak value is 5.55 A and frequency is 775 cycles per second, Calculate the average power dissipated by the loop, if its resistance is 64.3
Define melting temperature of a double-helical dna increases : Explain why the melting temperature of a double-helical DNA increases when the Na+ concentration increases.
What are important considerations in selecting an investment : You are planning to purchase a house in five years and intend to save a fixed amount of money each month for a down payment. How will you invest your savings and what are important considerations in selecting an investment vehicle?
Calculate ber if six bad bits in total transmission : A receiver produces a noise power of 200 mW with no signal. The output level increases to 5 W when a signal is applied. Calculate the signal-to-noise ratio as a power ratio and in decibels.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the value of the field current and the value of r

The DC machine rotates at 1500 RPM and it delivers rated current at rated terminal voltage. The field winding is connected to a 120 V supply. Find the value of the field current and the value of R (field control resistance) required.

  What is the new current feeding the combined loads

A 150 KVAR capacitor is connected across the line in Problem 1. (a) Sketch and label the power triangle for the capacitor. (b) Sketch and label the power triangle for the combined loads (capacitor and motor).

  Determine the number of encoding levels required

A digital communications system is being designed with the goal of transmitting 32 kbits/s over a channel having a bandwidth of 8 kHz. Determine (a) the number of encoding levels required and (b) the minimum signal-to-noise ratio required in the c..

  What is the value of the smallest resistor

The voltage drops across three resistors in series are measured 10V, 15V, and 25V. If the largest resistor is 47 ohms, what is the value of the smallest resistor?

  Write a program that reads a file containing only integer

Write a program that reads a file containing only integer, but some of the integers have embedded commas, as in 145,020. The program should copy the information to a new file, removing any commas from the information.

  How to design boost converter and inverter parameters

how to design boost converter and inverter parameters?

  Determine the transmission coefficient for the system

Determine the transmission coefficient for the system for X=a where a is on the order of nanometers. Determine the transmission coefficient for the system for X=a where a is on the order of meters

  What is dependent voltage-controlled voltage-source

(a) What is voltage source and its terminal (voltage/current) behavior (b) What is current source and its terminal (voltage/current) behavior (c) What is dependent voltage-controlled voltage-source

  Determine the possible rocs of the system

a) Draw a cascade or parallel form for the block diagram representation of the system b) Determine the possible ROC's of this system. For each case determine causality and stability of the system.

  What is difference between block diagram and front panel

What does the DAQ Assistant do How is it useful over the legacy acquisition methods What does FFT stand for and what does it do to a real-time signal Sketch the output of an FFT analysis performed on a 100 Hz sinewave signal at 1 V.

  Find the natural reponse of current for rlc circuit

Consider a series RLC circuit disconnected from a source at t=0. The circuit components are R=3 ohms, C = 500 F, and L = 1 H. We assume that Vc(0-) = 20 V and i(0-) = -0A.  a) Find the natural reponse i(t) for t > 0.

  What is current if battery conducted across semi conductor

The voltage V across a semi conductor in a computer is given by V= aI+BI^2, where I is the current (in A). If a 24 V battery is conducted across the semi conductor, find the current if a=4 ohms and B= 0.5 ohms/A.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd