What is the estimated collection efficiency at 250degree f

Assignment Help Civil Engineering
Reference no: EM13319566

Our ESP is collecting 95% of the particles in our exhaust stream. We are under pressure to improve its performance. It has been suggested that if we were to cool the inlet gas from the present 600°F to 250°F, the performance would improve. What is the estimated collection efficiency at 250°F, if we keep the mass flow rate constant, do not change any of the dimensions of the ESP, and if changing the temperature does not change any of the dimensions of the ESP, and if changing the temperature does not change the drift velocity,

Reference no: EM13319566

Questions Cloud

Strategy planning : Strategy Planning
How long will it take the wheel to make one revolution : A 66-N %u22C5 m torque acts on a wheel with a moment of inertia 175 kg %u22C5 m2. how long will it take the wheel to make one revolution?
Explain the stoichiometric coeffiecient for oxygen gas : What is the stoichiometric coeffiecient for oxygen gas when the following reaction is balanced using the smallest whole number coefficients? C12H26(g) + O2(g) --> CO2(g) + H2O(g)
A new binding machine is invented that binds in half : You should have 8 graphs. The written answer should be set up under the graph as follows: Price: Increase/Decrease (select one) Quantity: Increase/Decrease (select one) Determinant: One of the determinants for demand (TRIBE) or supply (ROTTEN) that c..
What is the estimated collection efficiency at 250degree f : Our ESP is collecting 95% of the particles in our exhaust stream. We are under pressure to improve its performance. It has been suggested that if we were to cool the inlet gas from the present 600°F to 250°F
Explain ammonium sulfate-((nh4)2so4) : If the following substance is dissolved in pure water, will the solution be acidic and Explain Ammonium sulfate-((NH4)2SO4)
Determine the rate at which heat must be transferred : A 50-ohm electrical resistor carries a current of 5 amperes. The resistor is maintained at a temperature of 30o C. Determine the rate at which heat must be transferred to the surroundings
How fast is it going at the bottom of the ramp : A ball is at the top of a ramp that is 4.5 m above a table. If the ball rolls without friction, how fast is it going at the bottom of the ramp
Compute the work done by the gas for the processes : Two pounds of an ideal gas are contained within a piston-cylinder arrangement. The initial volume and pressure are 1 ft3 and 75 psia respectively. The final volume is 3 ft3.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the magnitude of the acceleration of peg p

If the slotted arm OA rotates counterclockwise with a constant angular velocity of thetadot= 2.0 , determine the magnitude of the velocity of peg P when theta= 58. Determine the magnitude of the acceleration of peg P when theta= 58.

  Calculate equivalent pipe size and flow in the pipe

The first pipe of 0.4-m diameter is 500 m long, the second pipe 600 m long, size 0.3 m, and the last pipe is 500 m long of diameter 0.2 m. If the elevation difference between two reservoirs is 30 m, calculate equivalent pipe size and flow in the p..

  Find the hydraulic conductivity of the aquifer

Drawdown at an observation well 15m from the pumped well is 3.0 m and a drawdown at a second observation well 150 m away is 0.30 m. Find the hydraulic conductivity of the aquifer.

  What is the highest possibledesign speed for the curve

The road has 12-ft lanes. Due toexpensive excavation, it is determined that a maximumof 34 ft can be cleared from the road's centerline toward the inside lane to provide for stopping sight distance.

  What is the maximum height

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Determine the mass and specific volume of argon gas

Determine the mass and specific volume of argon gas in a vessel at 150 kPa and 20°C. The vessel is spherical, with radius 5 m.^5

  What is the level of service expected in each direction

A Class I rural highway segment of 10 miles in level terrain has a base free-flow speed (BFFS) of 65 mph. The cross section has 12-ft lanes and 6-ft clear shoulders on both sides of the road.

  Explain how to change the cell phone service

Plan 2 has a $40/month access fee, unlimited nights and weekends, 750 anytime minutes plus $0.29/minute for minutes over 750, text messages cost $0.05 each, and roaming cost $0.39/minute whenever she leaves the state.

  What is the length of a 2 degree increment along meridian

What is the length of a 2 degree increment along a (A) meridian and (B) parallel at 45N and 115W. Assume the radius of Earth is 6370 km.

  Find the correction for the calibration of the measuring tap

Find the correction for the calibration of the measuring tape using its formula. During the calibration of the measuring tape on comparator of 100.000m the length of the tape turned out to be of 99.993m

  How to derive the stiffnes of the cantilevered bean

a cantilevered bean has a lenght of L, a cross section area of A, and a flecural rigidity of EI. The free end is free to rotate and displace due to bending. derive the stiffnes of the cantilevered bean. Assume small deformations.

  Estimate settlement at t after the beginning of construction

The coefficient of consolidation of a clay for a given pressure range was obtained as 8x10^-3 mm^2/sec on the basis of one-dimensional consolidation test results. In the field, there is a 2-m thick layer of the same clay.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd