What is the concentration of the mixture of the stream

Assignment Help Civil Engineering
Reference no: EM13544538

A pickle producing plant produces and discharges a waste brine solution with a salinity of 13,000 mg/L NaCl at a rate of 0.14 MGD into a stream. Before the discharge enters the stream, the flow rate of the stream is 1.2 MGD and the salinity is 20 mg/L. Assume that you can model this as a CSTR.

What is the concentration of the mixture of the stream and the discharge directly below the discharge point?

Directly below the discharge point is a prime fishing spot and the fish are intolerant to salt concentrations above 200 mg/L. How much salt should be removed per day from the plant effluent stream in order to maintain a concentration of salt < 200 mg/L in the stream mixture?

Reference no: EM13544538

Questions Cloud

The given data show the result of a model known : The given data show the result of a model known as stopping sight distance, used by civil engineers to design roadways speed(mph) stopping sight distance(ft)
Design and detail the steel reinforcement for the section : The beam has a rectangular section which is to be singly reinforced. Given pt=1.1% design and detail the steel reinforcement for the section where the moment is maximum
To keep cells at 55 degrees : To keep cells at 55 degrees? Why or why not?
Should the engineer use the un-identified material or the : The modulus of elasticity of an un-identified metal is known to be 3000 ksi. An engineer has to design a rod with a fixed diameter to carry a load, P, and wishes to keep the deformations in the rod to a minimum.
What is the concentration of the mixture of the stream : Directly below the discharge point is a prime fishing spot and the fish are intolerant to salt concentrations above 200 mg/L. How much salt should be removed per day from the plant effluent stream in order to maintain a concentration of salt
What will be the ratio of the mass of natural gas : Natural gas is stored in a spherical tank at a temp. of10oC. At a given initial time, the pressure in thetank is 100 kPa gage, and the atmospheric pressure is 100 kPaabsolute
Explore the advantages and disadvantages of law making : Explore the advantages and disadvantages of law making
Determine the maximum height the projectile will reach : A projectile is fired up into the air at a speed of 161 m/s at an angle of 64° relative to the horizontal. Determine the maximum height the projectile will reach.
What would the manometer reading be for the same pressure : Two vessels are connected to a differential manometer using mercury (s=13.56), the connecting tubing being filled with water. The higher-pressure vessel is 5 ft lower in elevation than the other

Reviews

Write a Review

Civil Engineering Questions & Answers

  Finding the gallons of mercury

How many gallons of mercury (sg=13.54) would weight the same as 5 gallons of castor oil which has a specific weight of 56.69 pcf?

  Provide zero-air voids curve for the soil on the same plot

a) Density plot, locating γd(max) and ω opt on the plot b) Zero-air voids curve for the soil on the same plotc) Curve representing S = 70%

  Engineering societies based on the research

What are Engineering Societies based upon the research? List at least 10 discipline specific engineering societies along with their website addresses.

  Compute the stresses and deflections at the corner of slab

Compute the stresses and deflections at the corner of the slab according to Westergaard and Ioannides. Compute the stresses and deflections at the edge and interior according to Westergaard.

  What is the flow rate of air that must be entering the hood

We have a situation where hydrogen gas at 300 degrees C is flowing out of a tube at the rate of 100 mL/min. The tube is located in a fume hood operating at 25 degrees C and 1 atm.

  What is the difference in water levels between reservoirs

A wrought iron water line connecting two reservoirs at 20°C has a length of 1500 m, a diameter of 75 cm, two elbows (90º, long-radius, flanged), a fully open gate valve, and a reentrant pipe entrance.

  Determine the force in members gf-fb and bc

determine the force in members GF,FB, and BC of the Fink truss and state if the members are in tension or compression

  Find metric tons of gravel required to fill a excavated area

Calculate the metric tons of gravel required to fill an excavated area 70 meters by 50 meters by 2 meters deep if the gravel has a density of 1890 kg/(m^3).

  How long did the electric heating system run that night

A passive solar house that is losing heat is outdoors at an average rate of 50,000 kJ/h is maintained at 22oC at all times during a winter night for 10h.

  Would calcite be over or under-saturated in hot water heater

If log KSO, calcite (CaCO3(s)) = -8.61 at 50 oC, would calcite be over- or under- saturated in a hot water heater at 50 oC if the water was in equilibrium with calcite at 25 oC (log KSO = -8.30) when it entered the house

  Find critical radius and activation energy of solidification

If the nuclei from the liquid were cuboids, determine the critical radius and the activation energy of solidification for Spheroidal nuclei.

  Is the state water-quality standard being met downstream

If the state standard downstream is not met, the state has informed town 1 that it must treat its sewage further so the downstream standard is met. Use a mass balance approach to show that the state's request is unfeasible.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd