What is the charge before and after the mylar is withdrawn

Reference no: EM13547145

Two 8.00mm x 8.00mm electrodes with a 0.10-mm-thick sheet of Mylar between them are attached to a 8.0V battery. Without disconnecting the battery, the Mylar is withdrawn. (Very small spacers keep the electrode separation unchanged.) Dielectric constant for Mylar is 3.1. What is the charge before and after the Mylar is withdrawn?

Reference no: EM13547145

Questions Cloud

Initial lengths of the silver and gold rods : A thin rod consists of two parts joined together. One-third of it is silver and two-thirds is gold. The temperature decreases by 31.3 C°. Determine the fractional decrease ?L/(LSilver + LGold) in the rod's length, where LSilver and LGold are the init..

Estimate how long will it take for the wheel to come to rest : When a 19.6 kg wheel with an angular speed of 2.20 rad/s is disconnected from a motor, a 0.238 N · m frictional torque slows the wheel to a stop. how long will it take for the wheel to come to rest

Laser is used to burn a hole through a piece of metal : An industrial laser is used to burn a hole through a piece of metal. The average intensity of the light is S = 1.27 109 W/m2. What is the rms value of each of the following fields in the electromagnetic wave emitted by the laser? (a) the electric ..

Find what energy frequency and wavelength photon is emitted : A transition for an electron in the Bohr Hydrogen atom will be given. You determine what energy/frequency/wavelength photon is emitted

What is the charge before and after the mylar is withdrawn : Two 8.00mm x 8.00mm electrodes with a 0.10-mm-thick sheet of Mylar between them are attached to a 8.0V battery. Without disconnecting the battery, the Mylar is withdrawn. (Very small spacers keep the electrode separation unchanged.) Dielectric consta..

Obtain the angular acceleration of the blades : If three 1.1 m fan blades are connected to a motor and accelerated uniformly from rest to 58 rpm in 11 minutes. Determine the angular acceleration of the blades

How much energy is stored in the system : A 7.5 F capacitor is charged to 34 V and is then connected across a 11-mH inductor. (a) How much energy is stored in the system? (b) What is the frequency of oscillation of the circuit? (c) What is the maximum current in the circuit?

Hat is the maximum x-ray energy this machine can produce : A certain medical machine emits x-rays with a minimum wavelength of 0.02 nm. One day, the machine has an electrical problem, What is the maximum x-ray energy this machine (with electrical problems) can produce

How much current would flow through the heater : A heater runs on an AC voltage of 120 V and draws a power of 26 W. If this heater were run instead on a DC voltage of 70 V, how much current would flow through the heater? Hint: The heater can be modeled as a resistor.

User Account

All Pages