What is the capacitance that should be placed in parallel

Assignment Help Electrical Engineering
Reference no: EM13274335

A network has an input impedance of 120+100j Ω
what is the capacitance that should be placed in parallel with the network to provide an input impadance with:
a) Zero Reactance at w=1000 rad/s
b) Zero Reactance at w=2000 rad/s
c) A magnitude of 100Ω at w=1000 rad/s
d) Assuming that this network is constituted of a resitance in series with an inductance and that the angualr frequency is w =1000 rad/s, find the frequency at which:
1. |Zin| = 300Ω
2.Angle (Zin) = 30

Reference no: EM13274335

Questions Cloud

Explain standard solution of the analyze and diluted : A 10g sample containing an analyte was transferred to a 250 mL flask and diluted to volume. A 10mL aliquot of this solution, diluted to 25mL, yielded a signal of .235 units. A second 10 mL aliquot was spiked with 10mL of 1ppm standard solution of ..
Find the frequency at which zin is 300 ohm : A network has an input impedance of 120+100j Ohm what is the capacitance that should be placed in parallel with the network to provide an input impadance with: a) Zero Reactance at w=1000 rad/s b) Zero Reactance at w=2000 rad/s
Determine the thermal energy produced in the cup : A certain commercial mass spectrometer is used to separate uranium ions of mass 3.92e-25 kg and charge 3.20e-19 C from related species. calculate the thermal energy produced in the cup
State what is the percent yield of a reaction : What is the percent yield of a reaction in which 258 g phosphorus trichloride reacts with excess water to form 120. g HCl and aqueous phosphorous acid (H3PO3)
What is the capacitance that should be placed in parallel : A network has an input impedance of 120+100j Ω what is the capacitance that should be placed in parallel with the network to provide an input impadance with: a) Zero Reactance at w=1000 rad/s b) Zero Reactance at w=2000 rad/s
Determine the frequency of circling : An electron with kinetic energy 3.90 keV circles in a plane perpendicular to a uniform magnetic field. The orbit radius is 12.0 cm. find the frequency of circling
Define what is the concentration of the stock solution : A standard solution was made when 1.276g of pure copper wire (MM= 63.546g/mol) was weighed, dissolved in concentrated HNO3, and diluted to 1.00x102mL. What is the concentration of the stock solution
What is the resulting overall voltage gain of cb amplifier : A CB amplifier is operating with R load = 10 kiloohms, Rc = 10 kiloohms, and R signal = 100 ohms. At what current Ic should the transistor be biased for the input resistance Rin to equal that of the signal source
Explain neutralize the acid and convert : If, in practice, 5.0 mL of 16.0 M nitric acid were added to effect the dissolution of the copper, what would be the minimum volume of 4.00 M NaOH required to neutralize the remaining acid and convert all of the Cu2+(aq) to Cu(OH)2(s)

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Lithium ion battery technology

The paper includes Lithium ion battery technology with its advantages and disadvantages. The paper discusses about the Lithium air battery in which detailed reactions of Lithium with air including nonaqueous as well as aqueous are given.

  Power transformers and tariffs

Construction of different types of power transformer, significant energy savings

  Paper on orthogonal frequency-division multiplexing

This document is shown a paper on Orthogonal frequency-division multiplexing with advantages, disadvantages and uses.

  Function of the hmi in a scada system

This assignment contains electronics engineering questions like State the commonly found components of a SCADA (Supervisory control and data acquisition) system. and decribe the function of the HMI in a SCADA system.

  Resultant waveform of the odd harmonic series

Prepare an Excel graph showing the individual components and summated resultant waveform of the odd harmonic series resulting in an approximate square wave.

  Explain scada system

Explain the function of the HMI in a SCADA system.

  Design a 2-digit 24 second shot-clock

Design a 2-digit 24 second "shot-clock" countdown timer with pushbutton controller.

  Model a discrete-time system

To understand di erent signal models To be able to model a discrete-time system and design simple signal processing algorithms.

  Draw a relay construction diagram

Draw a relay construction diagram and briefly explain the operation of a relay.

  Frequency division multiplexing

Write a short technical report on Frequency Division Multiplexing

  Impact of electron energy

Briefly discuss the impact of electron energy, electron current and target on the Bremsstrahlung generated.

  Traffic light controller

The schematic of the traffic light controller

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd