What is the average voltage and rms voltage

Assignment Help Physics

Reference no: EM13645838

An AC generator produces a sinusoidal voltage at 60 Hz with amaximum of 120 V.

a. What is the average voltage?

b. What is the rms voltage?

c. If it were a DC generator with the same maximum of 120 V, what would be the “rms” voltage?

Reference no: EM13645838

Questions Cloud

What is the breakdown potential : You are asked to construct a capacitor having a capacitance near 1nF and a breakdown potential in excess of 10,000 V. You think ofusing the sides of a tall Pyrex drinking glass as a dielectric, lining the inside and outside curved surfaces with al..

What is the crankshafts angular acceleration : The crankshaft in a race car goes from rest to 3000 rpm in 2.0seconds. What is the crankshafts angular acceleration?

Sum the forces in y-direction-what is value of normal force : A man pushes a 2.0 kg broom at a constant speed across the floor.The broom handle makes a 50 degree angle with the floor. He pushes the broom with a 5.0 N force. Sum the forces in the y-direction. What is the value of the normal force?

How long will it take the box to move across distance : A 70.0 kg box is pulled by a 500N force at an angle of 30degrees to the horizontal. The friction is 30.0 N. Write the Newton's 2nd Law equations for the sum of the forces inboth the X and Y direction. What is the acceleration of the box?

What is the average voltage and rms voltage : An AC generator produces a sinusoidal voltage at 60 Hz with amaximum of 120 V. What is the average voltage? What is the rms voltage?

How long will it take for the ball to hit the ground : A 40.0 kg steel ball is thrown upward from the leaning tower ofPisa with an initial speed of 4.90 m/s. The tower is 55m high. How long will it take for the ball to hit the ground?

What would be the current in the primary : The electrical power supplied to a device is 120 V at 60 Hz. Thedevice requires 20.0 V and draws 2.5. What would be the current in the primary?

A manufacturing plant discovers : A manufacturing plant discovers that its electrical load due to the large numbers of motors is largely an inductive reactance equivalent to an inductance of 0.23 H. What capacitance would then need to be placed in series so that the power factor is..

What is the phase difference at the obsevation poimt : Two idenical wavelengths λ = 4.00 meters are emitted from separate sounces. At a certain obsevation point, the path-lengh difference between two waves is 5.00 meters. At a fixed point of time (ie, at some snapshot of time), what is the phase differen..

User Account

All Pages