User Account

All Pages

What is the average velocity

Assignment Help Civil Engineering
Reference no: EM13210686

hydrogen is flowing in a 50 mm diameter pipe at a mass rate of 0.01 kg/s. at section 1 the pressure is 280 kPa abs and t= 25 . what is the average velocity?

Reference no: EM13210686

Questions Cloud

Compute the composition of dry air : Use a spreadsheet to calculate the composition of dry air at 5400K and 1 bar. Take the initial composition as .78 mol N2, .21 mol O2 and .01 mol Ar. Neglect the ionization of NO.
Calculate the freezing point of aqueous : Calculate the freezing point of aqueous 0.369 m LiCl on the assumption that it is 100% dissociated. Calculate the freezing point if the percent dissociation is 0%.
Calculate the ieee double precision floating number : Calculate the IEEE double precision floating number immediately greater than the minimum number in double precision in both binary and decimal form
How much force must be applied to keep the gate \ : A gate (shaped like .25 of a cylinder with radius R=3m) is used to control the flow of water through a canal.The height of the water in the tank is 30m. How much force must be applied to keep the gate from opening? The gate is 30m wide.
What is the average velocity : hydrogen is flowing in a 50 mm diameter pipe at a mass rate of 0.01 kg/s. at section 1 the pressure is 280 kPa abs and t= 25 . what is the average velocity?
Plug-in hybrids currently under development-in marketplace : How will it be positioned relative to other plug-in hybrids currently under development or in the marketplace? How will it be launched in the selected target market? What activities will be conducted to build the image of the brand?
Compute the q for the water in joules : Calculate the Q for the water in Joules (c for water is 4.184J/g degrees celsius). Determine the Q for the metal in Joules based on your knowledge of conservation of energy. (you cannot use the Q=mcdeltaT equation, because you do not know the c fo..
Equity financing can come from external or internal sources : You are comptroller for your company. The CEO is a savvy individual with great instincts for the business. She strongly favors an investment that is only marginally acceptable at best. She has asked you to put together justification for it. What w..
Determine the values of k and c : The landing gear of an airplane can be idealized as the spring-mass damper system. If the runway surface is described y(t)=y0 cos wt, determine the values of k and c that limit the amplitude of vibration of the airplane (x) to 0.1m. Assume m=2000k..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Percent elongation and percent reduction in area

Also, at the failure cross sections the diameters are found to be 0.731 in., 0.645 in., and 0.587 in., respectively. Determine the percent elongation and percent reduction in area of each specimen.

  Determine the values of k and c

The landing gear of an airplane can be idealized as the spring-mass damper system. If the runway surface is described y(t)=y0 cos wt, determine the values of k and c that limit the amplitude of vibration of the airplane (x) to 0.1m. Assume m=2000k..

  Describe the application of geophysical techniques

Describe the application of geophysical techniques using electromagnetic induction as a tool for sustainable soil and water management of agricultural fields in the humid tropic Caribbean 300 word limit".

  What are the concentrations of the reactants and products

If 0.100 mol each of SO2 and NO2 are placed in a 500 mL vessel at this temperature, what are the concentrations of the reactants and products when equilibrium is established for this reaction?

  Heat exchanger second-law efficiency

The condenser in a refrigerator receives R-134a at 700 kPa and 50C, and it exits as saturated liquid at 25 C, The flow rate is 0.1 kg/s,and the condenser has air in at an ambient temperature of 15 C and leaving at 35 C. Find the minimum flow rate ..

  Length of contracted rectangular weir

A trapezoidal canal 6m wide at the bottom and having a side slope of 1V:2H carries water with a mean velocity of 1.0m/s to a depth of 60cm. What length of contracted rectangular weir 1.0m high should be placed at the middle of the canal to make th..

  Complete cycle of the motion

Find the time for one complete cycle of this motion if the spring constant is 21 N/m. (Assume that once the pendulum ball hits the spring there is no effect due to the vertical movement of the ball.)

  Calculate the maximum rod diameter

If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)?

  What are the x- and y-coordinates of the resulting center

The section of the plywood in the 3rd quadrant is sawed off and the resulting piece is then glued squarely over the 4th quadrant portion of the plywood with glue of negligible weight.What are the x- and y-coordinates of the resulting center of gra..

  What is the velocity head expressed in atmospheres

What is the velocity head expressed in atmospheres for a rapid filter operated at a surface loading rate of 475 m/d when the local porosity is 0.40?

  Hydrograph for a watershed having a drainagearea

For the data given below, derive the 2-hr unit hydrograph for a watershed having a drainagearea of 216 km^2, assuming a constant baseflow of 20 m^3/s.

  Define two types of classifiers mostly used in data mining

Two types of Classifiers mostly used in Data mining. Other than Naive Bayes and decision trees, pick two other types of classifiers and discuss how they work

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd