What is the appropriate choice of the threshold

Assignment Help Electrical Engineering
Reference no: EM13968021

Consider the opportunistic orthogonal signaling scheme described in Section 10.3.3. Each of the M messages corresponds to K (real) orthogonal signals. The encoder transmits the signal that has the largest correlation (among the K possible choices corresponding to the message to be conveyed) with the interference (real white Gaussian process with power spectral density Ns /2). The decoder decides the most likely transmit signal (among the MK possible choices) and then decides on the message corresponding to the most likely transmit signal. Fix the number of messages, M, and the number of signals for each message, K. Suppose that message 1 is to be conveyed.

1. Derive a good upper bound on the error probability of opportunistic orthogonal signaling. What is the appropriate choice of the threshold, y, as a function of M, K and the power spectral densities Ns/2, N0 /2?

2. By an appropriate choice of K as a function of M, Ns, N0 show that the upper bound you have derived converges to zero as M goes to infinity as long as cb/N0 is larger than -1.59 dB.

3. Can you explain why opportunistic orthogonal signaling achieves the capacity of the infinite bandwidth AWGN channel with no interference by interpreting the correct choice of K?

4. We have worked with the assumption that the interference s(t) is white Gaussian. Suppose s(t) is still white but not Gaussian. Can you think of a simple way to modify the opportunistic orthogonal signaling scheme presented in the text so that we still achieve the same minimal cb/N0 of -1.59 dB?

Reference no: EM13968021

Questions Cloud

How much will jayadev have at the end of fourty five years : Jayadev Athreya has started his first job. He will invest $5,000 at the end of each year for the next 45 years in a fund that will earn a return of 10 percent. How much will Jayadev have at the end of 45 years?
Find the length of the curve : Find the length of the curve from t=0 to t=3 and find the curvature k(t)
Expensed as incurred in a manufacturing setting : McCabe Manufacturing Co.'s static budget at 8,000 units of production includes $40,000 for direct labor and $4,000 for electric power.
Calculate the area of r : For which positive numbers 'a' (now considering all positive numbers) do you get a convergent integral when you attempt to calculate the area of 'R'? but for the volume of the solid obtained by rotating 'R' around the x-axis.
What is the appropriate choice of the threshold : We have worked with the assumption that the interference s(t) is white Gaussian. Suppose s(t) is still white but not Gaussian. Can you think of a simple way to modify the opportunistic orthogonal signaling scheme presented in the text so that we s..
When should a corporation pay dividends : What are the advantages and disadvantages of the corporate form of doing business?
In what way should you moce in order to maintain altitude : In what (horizontal) direction should you moce in order to maintain a constant altitude - that is, to niether climb nor descend the hill?
How does the intermediate access scheme compare with sdma : Fix the number of users K (to, say, 30) and the number of receive antennas nr (to, say, 5). Plot the symmetric rate with SDMA, orthogonal multiple access and the intermediate access scheme as a function of SNR (0 dB to 30 dB). How does the interme..
Explicit t-duality of dn string coordinates : Consider the expansion for an ND string coordinate. Find the separate left-moving and right-moving pieces, construct the dual string coordinate, and verify that it is of DN type.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Does anyone has a homework related to calculate

Does anyone has a homework related to calculate: failure probability estimation of SRAM Bit-cell using matlab?

  What is the maximum error burst size that can be tolerated

If the 48 bit blocks are buffered until 10blocks are collected and then they are interleaved and transmitted,what is the maximum error burst size that can be tolerated andstill have correct reception of the data What is the delay incurred

  Explain the two possible frequencies

What are the two possible frequencies to which the local oscillator could be set? What bandwidth should the 10.7 MHz IF amplifier have?

  Determine poissons ration v and the elastic modulus e

A metal plate is subjected to tensile stresses of sigma x = 21 ksi and sigma y = 17 ksi. The corresponding strains measured in the plate are Ex=920 µE and Ey=620µE. Determine Poisson's ration v and the elastic modulus E for the ..

  Count number of elements in array that are smaller than 16

Write a program to count the number of elements in an array that are smaller than 16. The array is stored at memory locations starting from $1010. The array has 30 8-bit unsigned elements. Store the count in the memory location $C001.

  Determine the speed and a suitable number of poles

A 3-phase, 60 Hz supply and two 3-phase synchronous machines are available. Determine the speed, and a suitable number of poles, for each synchronous machine to provide: a) A 3-phase, 180 Hz supply. b) A 3-phase, 500 Hz supply.

  How much hydrogen per day woad be needed to power a house

An ideal PEM fuel cell with an cadency of 83% needs 30.35g of hydrogen to generate IkWh. For a real cell with half that efficiency, how much hydrogen per day woad be needed to power a house that uses 25kWh per day?

  Identify the modes and all cut off and resonant frequencies

Make a plot of group velocity versus frequency for frequencies from 0 Hz to 500 kHz. Your plot should have 3 different curves for the three modes of propagation. Be sure to identify the modes and all cutoff and resonant frequencies clearly.

  Determine what is the instantaneous voltage at t of signal

An AC signal has a peak value of 100 V and a frequency of 60 Hz. If the voltage crosses zero in a rising direction at t=0 seconds, what is the instantaneous voltage at t = 0.004167

  Calculate alpha-omega-sub-delta and omega-sub-zero

The source-free circuit depicted in Fig. 9.1 is constructed using a 10mH inductor, a 1mF cPcitor, and a 1.5k ohm resistor. a) Calculate alpha, omega-sub-delta, and omega-sub-zero. b) write the equation which describes the current i for t>0.

  Calculate the resistors resistance

calculate the resistor's resistance. If the bandwidth were cut to 25 kHz, determine the expected output meter reading.

  What is the value of the smallest resistor

The voltage drops across three resistors in series are measured 10V, 15V, and 25V. If the largest resistor is 47 ohms, what is the value of the smallest resistor?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd