What is the angular velocity of the carriers

Assignment Help Civil Engineering
Reference no: EM13210998

The device shown is used in the semiconductor industry to polish silicon wafers. The wafers are placed on the faces of the carriers. The outer and inner rings are then rotated causing the wafers to move and rotate against an abrasive surface. If the outer ring rotates in the clockwise direction at 7 rpm and the inner ring rotates in the counterclockwise direction at 12 rpm, what is the angular velocity of the carriers and what is the velocity of C, the center of the top carrier.

Reference no: EM13210998

Questions Cloud

What would the salt concentration be in the brine : A reverse osmosis plant desalinates 5X10^6 L/day of feedwater containing 1500 mg/L of salts, yielding 3X10^6 L/day of product water with 75 mg?l of salt. What would the salt concentration be in the brine?
To what maximum angle, measured from vertical : To what maximum angle, measured from vertical, does the rod (with the attached ball of clay) rotate?
Compute the number of moles of cl2 present when equilibrium : Three and one - third mol es of Cl2 (g) are now added , keeping P and T constant. Calculate the number of moles of Cl2 present when equilibrium is reestablished. Obtain also the ratio of the final to the original total volume.
Find the steady-state concentration of pollutant in the lake : The pollutant has a reaction rate coeeficient k of 0.25/day. Assuming is pollutant is well mixed in the lake, find the steady-state concentration of pollutant in the lake.
What is the angular velocity of the carriers : If the outer ring rotates in the clockwise direction at 7 rpm and the inner ring rotates in the counterclockwise direction at 12 rpm, what is the angular velocity of the carriers and what is the velocity of C, the center of the top carrier.
Determine the theoretical discharge : A vertical triangular orifice in the wall of a reservoir has a base 0.9m long,0.6m below its vertex and 1.2 m below the water surface. determine the theoretical discharge?
Synthesized using aluminum oxide and balance the equation : Cryolite, Na3AlF6(s), an ore used in the production of aluminum, can be synthesized using aluminum oxide. Balance the equation.
At what temperature does the liquid solidify : What is the composition of this last remaining liquid phase?
What are engineering societies based upon the research : What are Engineering Societies based upon the research? List at least 10 discipline specific engineering societies along with their website addresses.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What are the basic differences between the afl as a labor

What are the basic differences between the AFL as a labor union and the CIO type of union?

  Give beam deflection solution

Beam Deflection Solution, Derive an expression for the deflection due to shear for a cantilever beam of constant rectangular cross section, under action of a point load, P at free end.

  Determine which motor should be installed based on the pw

At the end of 15 years, the first motor will have a salvage value of $50 and the second motor will have a salvage value of $100. consider the MARR to be 8%. (note : 1HP=0.7457 kw). Determine which motor should be installed based on the PW criterio..

  Describe a dynamic programming algorithm

Describe a dynamic programming algorithm to find an independent set of T such that the sum of numbers of nodes in the set is the largest among all possible independent sets of T.

  Calculating energy for vacancy formation

The number of vacancies in some hypothetical metal increases by a factor of 4 when the temperature is increased from 1090 K to 1140 K. Calculate the energy (in J/mol) for vacancy formation assuming that the density of the metal remains the same ov..

  Length of contracted rectangular weir

A trapezoidal canal 6m wide at the bottom and having a side slope of 1V:2H carries water with a mean velocity of 1.0m/s to a depth of 60cm. What length of contracted rectangular weir 1.0m high should be placed at the middle of the canal to make th..

  How long the train blocked the crossing

Assuming constant acceleration, determine how long the train blocked the crossing. Dis- regard the width of the crossing.

  Determine the compressive strengths of the following

Determine the compressive strengths of the following

  Calculate the distance between two successive crests

A photograph is taken of a transverse wave travelling along a length of rope. At this instant the shape of the wave is described by y = (2 m) sin ((0.8 rad.m-1)x+0.8 rad). The speed of the wave is 2 m/s. Calculate the distance between two successi..

  Average waiting time in the queue

What is the average length of queue, the average time spent in the system, and the average waiting time in the queue?

  Calculate the total drilling cost

Calculate average figures for tonnes/round and powder factors in kg/tonne and Determine the drill metres required to achieve a production rate from grade control blasting.

  Dimensions of an acceptable box of a largest area

A delivery company accepts only rectangular boxes the sum of whose length and girth (perimeter of a cross section) are equal to 108cm. Find the dimensions of an acceptable box of a largest area.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd