What is the actual mechanical advantage of the system

Assignment Help Mechanical Engineering
Reference no: EM13212877

what is the actual mechanical advantage of the system?

A first class lever in static equilibrium had a 50lb resistance force and 15lb effort force. the levers effort force is located 4ft from the fulcrum

 

Reference no: EM13212877

Questions Cloud

How does tension spread over the line abad : A small boat hangs from two davits, one of which is shown in the figure. The tension in line ABAD is 82 lb, determine the moment about C of the resultant force exerted on the Davit.
Compute the ionization of the aspirin : When dissolved in your stomach (pH=1) the concentration of aspirin (acetylsalicylic acid Ka = 3.0 x 10 ^-4) is 0.2 M. Calculate the % ionization of the aspirin.
What is the price the firm will set as a monopolist : Given the following information, model the following monopoly for a strain of corn which has been patented in a totally, not-at-all-evil way by multinational agri-corp Notmonsanto. (HINT: Set up a table with Quantity in increments of 0.5)
What value of sp is required : In a tubular low pressure chemical vapor deposition (LPCVD) reactor, gas is introduced at one end at a rate of 75 torr-L/min. At the other end is a vacuum pump of a speed Sp. If the reactor must operate at 1 torr, what value of Sp is required?
What is the actual mechanical advantage of the system : what is the actual mechanical advantage of the system?
Determine the velocity of each block : Block A has a mass of 3 kg and B has a mass of 5 kg. If the system is released from rest, determine the velocity of each block in t=4s. Neglect the mass of the pulleys.
Explain how should the input combination be adjusted : Hernandez Corp. uses two variable inputs, X and Y, to produce its final product, canoes. Its engineering department has estimated the marginal product functions for inputs X and Y as follows: MPx = Y/X MPy = 4 X/Y Where X and Y denote.
Explain attractive interaction among the molecules of a gas : attractive interaction among the molecules of a gas are more important than repulsive interactions, it's fugacity coefficient is less than
Determine the electric flux through this surface : A uniform linear charge density of 4 nC/m is distributed along the entire x axis. Consider a spherical (radius = 5 cm) surface centered on the origin. Determine the electric flux through this surface.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Supposing the plant operates on the ideal vapor-compression

Assuming the plant operates on the ideal vapor-compression cycle using refrigerant 134-a between the pressure limits of 120 and 700 kPa, determine

  Estimate the average temperature the wall will attain

Assuming that the air is 80°F and 1 atm and blows across the wall as on a flat plate, estimate the average temperature the wall will attain for equilibrium conditions.

  Calculate the thermal efficiency of this cycle

The Brayton cycle shown in figure 6.41 operates using CO2 as a working fluid with compressor and turbine isentropic efficiencies of 1.0. Calculate the thermal efficiency of this cycle when the working fluid is modeled.

  Determine the mass flow rate

(a) Draw and label a schematic of the system. (b) Determine the mass flow rate (kg/s) of water vapor neededand (c) the rate of exergy destruction (kW)

  Determine the natural frequency of the system

A 0.453-Kg mass attached to a light spring elongates it by 7.87mm. Determine the natural frequency of the system.

  Find the air exit temperature from the compressor

Air exits from the nozzle at 800m/s. find the air exit temperature from the compressor.

  Explain modulus of elasticity

A linear isotropic material has the shear modulus of elasticity G of 11.5*10^6 psi and the Poisson's constant v of 0.3.

  Explain tensile force formulas

Tensile force formulas, A cylindrical steel beam is 2 inches diameter and 6 feet long. The modulus of elasticity is 30 x 1,000,000 psi. If the beam is subjected to a tensile force of 1000 lbs, what will be the resulting unit strain?

  Determine the force required to pull the wedge out

A 9º wedge is inserted using a force of 1000 lbs. The static coefficient of friction between the wedge and the log is 0.50. Determine the force required to pull the wedge out.

  What is the head loss in m

Drinking water at 10oC for an office complex must be pumped along a horizontal section of PVC pipe 50 m long at 2 m/s. The pipe has a nominal diameter of 62.5 mm and is Schedule 40. What is the head loss in m?

  Determine the velocity of each block

Block A has a mass of 3 kg and B has a mass of 5 kg. If the system is released from rest, determine the velocity of each block in t=4s. Neglect the mass of the pulleys.

  What is the composition of the solid product

Calcium oxide (CaO) is formed by decomposing limestone (pure CaCO3). In one kiln the reaction goes to 70% completion. What is the composition (by mass) of the solid product (CaO) withdrawn from the kiln? (Hint: there will be two separate product s..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd