What is the absolute pressure within the tank

Assignment Help Civil Engineering
Reference no: EM13320785

If the atmospheric pressure is 14.20 psia and a gage attached to a tank reads 12.5 inHg vacuum, what is the absolute pressure within the tank?

Reference no: EM13320785

Questions Cloud

How far was the mirror moved : A piece of thin spherical shell that has a radius of curvature of 90 cm is silvered on both sides. How far was the mirror moved
How much current should the solenoid carry : A 51.0cm -long solenoid 1.35 cm in diameter is to produce a field of 0.335mT at its center. How much current should the solenoid carry
Strategies for responsible business : STRATEGIES FOR RESPONSIBLE BUSINESS
What would scientist expect the barometer reading to be : A scientist plans to build a water barometer. When the atmospheric pressure is 990 mb abs and the water temperature is 70 degrees Celsius, what would you expect the barometer reading (water rise) to be
What is the absolute pressure within the tank : If the atmospheric pressure is 14.20 psia and a gage attached to a tank reads 12.5 inHg vacuum, what is the absolute pressure within the tank
Determine the saturation ratio with dry bulk density : a soil has a moist buldk density of 1950 kg/m^3, a dry bulk density of 1750 kg/m^3, and a soilds mass density of 2650 kg/m^3. determine the saturation ratio
Compared to the process without inventory : If inventory were permitted to accumulate throughout this process, what impact would you expect on capacity (as compared to the process without inventory)?  options are either a smaller or larger impact on capacity than the first unit.
What is the economic order quantity : What is the economic order quantity? Should a small business establish a method of inventory management? Why or why not? What steps would be involved for the small business to set up inventory management?
What should be the cross-sectional area of the circular rod : An engineer has to design a rod made with the same steel to carry a load of 150 kips without yielding. He desires to have a factor of safety against yielding of 1.5. What should be the cross-sectional area of the circular rod

Reviews

Write a Review

Civil Engineering Questions & Answers

  What was students associated perception per reaction time

the student strikes the sign at a speed of 25 mi/h. if the student was traveling at 55 mi/h when the sign was first spotted, what was the students associated perception/ reaction time

  Calculate area of flow-hydraulic radius and wet perimeter

Calculate the area of flow, hydraulic radius, wet perimeter, and top width of a 12-inch diameter pipe that flows at 1/4 of its capacity.

  Determine time at which collar starts to slip relative to it

The coefficient of static friction between the collar of mass m=2 kg and the bent bar is Us=0.35, and the collar is initially d=70 cm from the spin axis AB. Assuming the motion starts at t=0, determine the time at which the collar starts to to sli..

  Formulate problem as an ip and find optimal solution

The Record-a-Song company has contracted with a rising star to record eight songs. The sizes in MB of the different songs are 8, 3, 5, 5, 9, 6, 7, and 12, respectively. Record-a-Song uses two CDs for recording. Each CD has a capacity of 30 MB.

  Compute cbr to penetrate 5 mm in calibrated rock soil

10 kPa of pressure required to push a 3 in^2 piston 5 mm into the compacted soil. Compute the CBR (%) if the same 3 in^2 piston required 100 kPa to penetrate 5 mm in calibrated rock soil.

  Determine the tensions in the cables and the reactions

The suspended load exerts a force F = 600 lb at A and bar OA weighs 200 lb. Assume that the bar's weight acts at its midpoint. Determine the tensions in the cables and the reactions at the ball and socket support O.

  Find the rate of change in volume

A water tank has a height of 120m, and its area of cross-section is 2000m. Water is released from the tank and the water level drops by 1 meter every minute. Find the rate of change in volume.

  Determine the required length of splice to be lap spliced

number 9 compression bars in a column are to be lap spliced. there is no excess steel, and the bars are enclosed by a spiral of 3/8 inch diameter wire having a pitch of 3 inch.

  What is the maximum grade the vehicle could ascend

A 2500-lb car (CD = 0.35, Af = 25 ft^2, and ? = 0.002378 slugs/ft^3) has 14-inch-radius wheels, a drivetrain efficiency of 90%, an overall gear reduction ratio of 3.2 to 1, and drive axle slippage of 3.5%.

  Design the appropriate reinforced concrete footing on a soil

A combined footing is subjected to an exterior 16 in. x 16 in. column abutting the property line carrying a total service load Pw = 300,000 lb and an interior column 20 in. x 20 in.

  Determine the optimum emise velocity per unit speed

If the aircraft flies at 9000 m standard altitude, make a plot of drag (in N) versus speed (from stall to 240 m/s) and determine the optimum emise velocity (minimum drag per unit speed).

  What is the minimum distance from the stalled car

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd