What is max quantization error that can expected from meter

Assignment Help Electrical Engineering
Reference no: EM13279604

1. A DC voltmeter is rated at 14 bits of resolution and has a full-scale input range of ±5V. Assuming the meter's ADC is ideal, what is the maximum quantization error that we can expect from the meter? What is the error as a percentage of the meter's full-scale range?

2. Assuming that an RC low pass filter with R = 1kW and C = 10mF is used to filter the output of a DUT containing a noisy DC signal. If we want the output of this filter to settle to within 0.2% of its final value before making a DC measurement, how much settling time does the RC filter require? If the capacitor value changes to 2.2mF, what will the value of the settling time be?

3. A device is tested and found to have a Gaussian distribution with an average output of 10 and a variance of 2 . Using MATLAB, produce a histogram that displays the percentage of data contained in bin sizes of 0.2. Then use MATLAB to calculate the likelihood of the device having an output value between 8.0 and 8.2. Provide the MATLAB code, the graph of the histogram, and calculated value.

Reference no: EM13279604

Questions Cloud

What is its future value : An investment will pay $200 at the end of each of the next 3 years, $400 at the end of Year 4, $500 at the end of Year 5, and $700 at the end of Year 6. If other investments of equal risk earn 10% annually, what is its present value? what is its f..
Design a fsm which controls these parking meters : A parking meter accepts only quarters, which are worth one half hour each. A car may park at the meter for a maximum of 90 minutes; and the meter does not give change- quarters beyond 90 minutes are accepted, but don't increase the meter's count.
Identify specific polling routine and input control software : 1. An operator prepares an 8-bit binary value with a dip switch. 2. A momentary contact switch (single-pole-single throw) connected to only one end of a cross-coupled NAND latch is activated. This sets the output of the latch to a logic one.
What was the size of each payment : What will the interest charges be if she elects the 24-month plan and find the periodic payment R required to amortize a loan of P dollars
What is max quantization error that can expected from meter : A DC voltmeter is rated at 14 bits of resolution and has a full-scale input range of ±5V. Assuming the meter's ADC is ideal, what is the maximum quantization error that we can expect from the meter.
What is no-arbitrage value of european vanilla put option : A Europeand Vanilla Put option on the underliner with stike price of $9 is trading in the market. What is the no-arbitrage value of the European vanilla Put option?
Find the mass of a lead weight : A fishing line has attached to it a hollow plastic float 2.65 cm in diameter and having a mass of 1.50 g. Find the mass of a lead weight
Define the value of the rate constant at 15 : A reaction has a rate constant of 1.27×10?4/s at 29 degrees C and 0.234/s at 79 degrees C. A) Determine the activation barrier for the reaction. B) What is the value of the rate constant at 15
Find the carnot coefficient of performance of refrigerator : A Carnot engine works between temperatutes T1 = 495K and T2 = 302K. What is the Carnot coefficient of performance, KC, of the refrigerator

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the largest possible error in an individual reading

When the temperature is held constant, the digital display of thermometer A does not change, but the display of thermometer B randomly toggles between three to four adjacent readings (i.e., +/- 2 degrees). For the questions below, assume that the ..

  What is the gain in db for the amplifier at that frequency

An amplifier has a power gain of 3dB and an input signal power P(In) = 100mW. What is the output power level A tank circuit coil is operating at a resonance frequency f(res) = 20 MHZ; The circuit must operate with a bandwith of 200 KHZ.

  Find steady-state error to the unit ramp input

Find steady-state error to the unit ramp input. If it is greater than 0.1, design a lag compensator that helps to achieve the steady-state error (to the unit ramp input) no more than 0.1. (Hint: Use Matlab to nd the dominant closed-loop poles.)

  Determine what is the back emf of an ac series circuit

If I have an AC series circuit with a voltage source of 3 Vrms, a frequency of 5 kHz, a 100 mH coil, and a 1 kohm resistor, how do I determine what the back emf is

  When the radiator area a is a minimum for temperature ratio

A heat engine operating in outer space may be assumed equivalent to a Carnot engine operating between reservoirs at temperatures TH and Tc The only way heat can be discarded from the engine is by radiation

  Create the layout design for mos nand3 gate using depletion

Create the layout design for MOS NAND3 gate using a depletion-type transistor with VTL = -0.3V and enhancement-type transistors with VTO = 0.5V such that VOL is less than or equal to 0.1V. VDD = 2.5V , tox = 10nm and 2X = 0.6μm .

  Calculate the nominal full load current of the machine

A 2000kW synchronous motor operates at a three - phase line-to-line voltage of 4kV. It has a synchronous reactance of 4 ohms per phase. Calculate a) The nominal full load current of the machine when the excitation voltage E0 ( line - to-line) is 4k..

  What is the half-life for atp and for adp

The rate of production of ATP in the cell is about 10 million molecules per second. The steady-state number of ATP molecules in the human body is about 0.1 mol. The number of cells of a human body is approximately 1014.

  Calculate power angle if network receives a capacitive power

A 150 MVA, 24 kV, 123% three-phase synchronous generator supplies a large network. The network voltage is 27 kV. The generator operates with an induced voltage, which is twice the rated line-to-neutral voltage.

  Explain which parameter of an fm transmission determines

Do either or both of the reasons you gave in part (a) above also apply to a point to point voice link using frequency modulation? c. Which parameter of an FM transmission determines whether it is wideband or narrow band?

  Define the low pass filter with a cutoff frequency

Determine the transfer function for a first order low pass filter with a cutoff frequency of 1000 radians/sec (note radians and not Hertz) and a pass band gain of 1 using the following types.(a) Butterworth type(b) Chebyschev type

  Find the magnetic field h1 in the free space

A magnetic material fills the half-space z 0) is free space. The per-meability of free space is mu_0 and the permeability of the magnetic material is 5 mu_0. The magnetic flux density in the magnetic material is B2= 10 ax+ 15 ay-20 az

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd