What is amount of air mass that passes through wind turbine

Assignment Help Mechanical Engineering

Reference no: EM13707466

What is the amount of air mass that passes through a wind turbine swpet area per minute if the turbine has 42m long blades and the air flux is 8kg/m^2s ?

Reference no: EM13707466

Questions Cloud

Determine the change in internal energy and enthalpy : 2 kg of saturated liquid water at 1bar is compressed to 25bar and 100C in a water pump. Determine the change in internal energy (kJ) and enthalpy (kJ) of water in two ways. Using the compressed liquid tables

Aluminium has a density : Aluminium has a density of 2.7 g/cm3. Suppose you would like to produce a composite material based on aluminium having a density of 1.5 g/cm3. Design a material that would have this density. Would introducing polyethylene, with a density of 0.95 g/cm..

A piston-cylinder assembly contains ammonia initially : A piston-cylinder assembly contains Ammonia initially at a pressure p = 500 kPa and specific volume v = 0.24533 m^3/kg (state 1). Expansion occurs to a state where the pressure is 150 kPa (state 2). During the process the pressure and specific volume..

Force on piston is proportional to cylinder volume squared : A cylinder fitted with a piston containing 1kg of Refrigerant 134a at 20C and 90% vapor quality is attached to a line flowing Refrigerant 134a. The total force on the piston is proportional to the cylinder volume squared.

What is amount of air mass that passes through wind turbine : What is the amount of air mass that passes through a wind turbine swpet area per minute if the turbine has 42m long blades and the air flux is 8kg/m^2s ?

Cracking the code of life : The first two segments of "Cracking The Code of Life" provide a good background for understanding this particular disease. Watch them if you are interested.

Helium is now compressed in a polytropic process : A piston-cylinder device contains helium gas initially at 145 kPa, 20 degrees C, and 0.5 m^3. The helium is now compressed in a polytropic process (PV^n = constant) to 390 kPa and 140 degrees C. Determine the heat loss or gain during this process.

What is the flow rate through the system in units : A hydraulic system is powered by a 9 kw motor and operates at 11 MPa. Assuming no losses, what is the flow rate through the system in units of m³/s?

Determine the initial and final temperature : A piston cylinder assembly which initially has a volume of 1m^3 is filled with .7 kg of air. The pressure on the air is always maintained at 1.2 bars. Heat transfer is allowed to take place until the volume is 60 percent of the initial value. You may..

User Account

All Pages