What happens after the memory is full

Assignment Help Civil Engineering
Reference no: EM13545634

Assuming approximately 19,296 data points can be held in memory, with a 21X Datalogger (CR23X Micrologger), capturing battery voltage; panel temperature; 2 thermocouples with max, min, avg, and stdev for each; all every 2 seconds, how long before you fill up the memory? What happens after the memory is full?

Reference no: EM13545634

Questions Cloud

Find the operating points (q) for one pump : The pump curve for a given pump is represented by hp,pump=20 (1-(Q/100)^2) where hp,pump is the head provided by the pump in feet and Q is the discharge in gpm.
What is the minimum radius that can be cleared : A two lane hwy with 12' lanes is to be reconstructed to a design speed of 50 mph. Due to right of way restrictions, the largest distance that can be cleared from the edge of the road is 10'. What is the min. radius?
What is the tensile force on the weld per foot : Due to a leak in Pump Station 1,the Alaska pipeline is shut down briefly.The pipe line is half full.Assume the pipe is welded horizontally at its midpoint.What is the tensile force on the weld per foot? Assume Ø=40”and ?oil=53.55lb/ft3.
The average return period of the median value : The probability that, for a 2-year period, the peak flow rate will equal or exceed the median value in the second year, but not in the first year?
What happens after the memory is full : Assuming approximately 19,296 data points can be held in memory, with a 21X Datalogger (CR23X Micrologger), capturing battery voltage; panel temperature
Compute the maximum fiber stress : An S 12x40.8 of A36 steel in a building is supported as a simple beam having a span equal to 17ft 6in. and carries a uniform load equal to 1.60 klf, which includes the weight of the beam over the entire span.
What is the probability that the probability if the flow : You are provided that a 33-year record of peak annual flow rates was subjected to a frequency analysis. You are interested in the median value. Thus, for part (a), what is the probability that the probability if the flow rate exceeds the median value..
Determine the elongation of the cable elongation : A homogeneus cable of a lenght L and uniform cross section is suspended from one end. A. denoting by p the density (mass per unit volume) of the cable and by e its modulus of elasticity. determine the elongation of the cable
Determine the design load for strength and serviceability : Determine the design load for strength and serviceability limit states (short-term and long term), for a steel beam in a residential building with the following data;

Reviews

Write a Review

Civil Engineering Questions & Answers

  A community has a current population of 2800 it is

a community has a current population of 2800. it is estimated that in 20 years its population will be 38000. the

  Estimate the time in minutes required to drain the tank

You are the Chief Civil Engineer for the Enhanced Protein Production Plant on the planet Zog where the gravitational constant is 15 ft/s2. A protein storage tank has developed a structural problem and must be drained.

  What are reasons for difference in coefficient of friction

what are reasons for difference in the coefficient of kinetic friction on horizontal surface with a hanging mass at constant velocity compared to object one on incline

  Find the nominal flexural strength mn for as

A tensile-reinforced beam has b = 12 in. and d = 20 in. to the center of the bars, which are placed all in one row. If fy = 60,000 psi and fc' = 5000 psi,

  Calculate the total friction force exerted by the road

A 3220-lb car enters an S-curve at A with a speed of 60 mi/hr with brakes applied to reduce the speed to 45 mi/hr at a uniform rate in a distance of 300 ft measured along the curve from A to B.

  Determine the maximum force

two links AB and DE are connected by a bell crank as shown. Determine the maximum force that can be safely exerted by link AB on the bell crank if the maximum allowable value for the reaction at C is 1600N.

  Estimate the power required to accelerate a 1350 kg vehicle

The vehicle has a frontal cross -sectional area of 1.9 m^2. The roadway has a straight alignment and a badly patched and broken asphalt surface. assume a drag coefficient of 0.3 and p of air of 1.29 kg/m^3

  Does construction method have any play in the construction

Battered piles are used on many construction projects as a permanent part of the element being constructed. Does this construction method have any play in the construction of a temporary earth retention system

  Calculate the change in reservoir pore volume in barrels

A reservoir cover is 12,000 acres and is 20 feet thick. The formation has initial porosity of 0.25. The pore volume compressibility of the reservoir rock is 3.0 x 10^(-6) psi^(-1) .

  How much volume of naoh solution is needed at poh at 9

A NaOH solution has pOH at 8. How much volume of this NaOH solution is needed to prepare 1 L of a NaOH solution at pOH at 9.

  How far back from the front axle would the center of gravity

how far back from the front axle would the center of gravity have to be to ensure that the maximum tractive effort developed for front- and rear- wheel-drive options is equal (assume that all other variables are unchanged)

  How much does the student have to pay at the end of 3 years

The compound interest formula is F=P(1+i)n where F is the total amount due, P is the initial cost or amount of money, i is the interest rate, and n is the number of periods interest is computed. 1.A student purchases a $1400 laptop computer for sc..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd