What frequency would be required

Reference no: EM13323459

If a 2.4 m wave was created using a frequency of 63 Hz, what frequency would be required to creat the next higher harmonic?

Reference no: EM13323459

Questions Cloud

Find acceleration and direction of the motion of the system : 3 objects are connected on an inclined table with the masses of 8.0kg, 4.0kg and 2.0kg and the pulleys are frictionless. determine the acceleration and direction of the motion of the system

Determine the total solids in the sample : A surface water sample has been evaporated until dry in a crucible dish. The dry (tare) weight of the crucible is 44.642gm. The weight of the residue plus the cruciible is 44.6484gm.

Explain the delta h for the neutralization of naoh : The delta H for the neutralization of NaOH with H2SO4 is -144kj/mol H2SO4. What is the maximum measured temperature in the styrofoam cup

Determine the required bolt spacing in the longitudinal x : A 10 m long built-up beam is to be fabricated from a universal section beam (UB) and two 'C' channel sections (as indicated). The beams are joined by bolts, with the allowable shear load in each bolt being 12 kN.

What frequency would be required : If a 2.4 m wave was created using a frequency of 63 Hz, what frequency would be required to creat the next higher harmonic

How to determine the two possible depths of flow : A 200 m wide natural stream, whose cross-section can be approximated by a rectangular cross-section, contains a dischargeof 80 cumecs. If the specific energy of the flow is 1.5 timesthe minimum specific energy

How long is her shadow : A 5.4ft -ft-tall girl stands on level ground. The sun is 30? above the horizon. How long is her shadow

Determine the ratio of the weight of the solid shaft : Two shafts are made of the same material and are of equal lengths.one of them is solid and another one is hollow. the ratio of inside and outside diameters for hollow shaft is 0.65.

What is density of compound a : Compound A --> Compound B if you start with 10.0 mL of Compound A and obtain 9.0 g of Compound B. Density of Compound A = 0.75 g/mL MW of Compound A = 150. g/mol MW Compound B = 300.

User Account

All Pages