What final fraction of the glasss volume is filled with air

Assignment Help Mechanical Engineering

Reference no: EM13707419

An empty drinking glass is held upside down just above the surface of water. A scuba diver carefully takes the glass, which remains upside down, to a depth of 10.3 meters below the surface so that a sample of air is trapped in the glass. Assume that the temperature of the water (and the trapped air) remains fixed at 15oC during the descent, and that the ambient pressure at the surface is Patm = 1.103×105 Pa. Assume air behaves as an ideal gas, and water behaves as an incompressible liquid. (Hint: the hydrostatic pressure increase is proportional to the diving depth as ?P=?H2Og ?h.) Answer the following at diving depth of 10.3 meters:

a. Provide a clearly labeled sketch of the situation and define system boundaries.

b. Clearly state your assumptions.

c. What is the final pressure in the glass?

d. What final fraction of the glass’s volume is filled with air?

e. Show the process on a P-v diagram.

f. If 0.2 grams of air are initially trapped within the glass, how much energy (heat) crosses the boundary of the system (air) during the process? Explain your answer.

Reference no: EM13707419

Questions Cloud

Determine the design thrust for a throat area : A rocket nozzle has a chamber pressure of 20 Bar (2 MPa) and a chamber temperature of 2750 K. The rocket is designed to operate isentropically at 12,500 m altitude. Note that the pressure at 12,500 m can be estimated using this equation P/P0 = exp [-..

Determine internal pressure required to initiate yielding : A thin-walled cylindrical pressure vessel is capped at the end and is subjected to an internal pressure (p). The inside diameter of the vessel is 6 ft and the wall thickness is 1.5 inch. The vessel is made of steel with tensile yield strength and com..

Calculate indicated mean effective pressure : A 3L, 4-stroke, V6 engine with a 9.5:1 compression ratio delivers 205 N-m at 3600 RPM. At this speed, air enters the cylinder at 85 kPa and 60 C and combustion ends at 20 crank angle after top-dead-center. It is known that the engine is square and th..

Calculate the mass of fuel injected per cylinder : A direct injection, four-stroke, six cylinder Diesel engine has 10L if displacement volume. Bore and stroke dimensions are 125mm and 136mm, respectively. The engine was designed to deliver 184 HP at 2100 RPM. Calculate the air flow rate (g/s) when pi..

What final fraction of the glasss volume is filled with air : An empty drinking glass is held upside down just above the surface of water. A scuba diver carefully takes the glass, which remains upside down, to a depth of 10.3 meters below the surface so that a sample of air is trapped in the glass. Assume that ..

Similarity and difference between trip and twip steels : Discuss the similarity and difference between TRIP and TWIP steels. Discuss the advantages of TWIP steels. Discuss the effects/roles of Mn, Al and Si in TWIP steels.

Various car and truck spare parts using different steels : Suppose you are appointed as a material engineer at an industry company. The company produces, cutting tools, various car and truck spare parts using different steels. The steels as raw materials to make the parts. All steels are round bars with 50 m..

Thin-walled cylindrical pressure vessel : A thin-walled cylindrical pressure vessel is capped at the end and is subjected to an internal pressure (p). The inside diameter of the vessel is 6 ft and the wall thickness is 1.5 inch. The vessel is made of steel with tensile yield strength and com..

Delta velocity required to change inclination of orbit : Calculate the delta velocity required to change the inclination of a circular orbit at 32,000 km altitude from a 28.5 degree inclination to an inclination of 45 degrees. Compute the propellant used if the satellite weighs 1200 lbs after the maneuver.

User Account

All Pages