What does the inductor current waveform look like

Assignment Help Electrical Engineering
Reference no: EM13251926

Assume a buck converter contains a synchronous rectifier. Does it operate in the discontinous conduction mode at light load? Why? What does the inductor current waveform look like?

Reference no: EM13251926

Questions Cloud

Define decision variables and formulate the problem : Assume that because of the unique nature of their products, CSD can sell as many rackets as they can produce?
Explain masses of nacl and water are needed to prepare : what masses of NaCl and water are needed to prepare 1000g of a solution that is 0.90% by mass
Convert the payoff matrix to utility values : Suppose that the utility function for the owner of Morely Properties can be approximated by the exponential utility function U(X) = 1 - e^(-x/R) where the risk tolerance value R=100 (in $1,000s).
Enhancement of a current widget : Enhancement of a current widget being offered by our company and risk of completion of project on time is low.
What does the inductor current waveform look like : Assume a buck converter contains a synchronous rectifier. Does it operate in the discontinous conduction mode at light load Why What does the inductor current waveform look like
Find average induced emf in the wire : A four-turn circular wire coil of radius 0.565 m lies in a plane perpendicular to a uniform magnetic field of magnitude 0.340 T. what is the average induced emf in the wire during this time
Important force in arena of international relations : In a political science class, one of your classmates argues that the Olympics are an important force in the arena of international relations. Would you agree or disagree with this student?
Determine the value of current through the capacitor : determine the current through the capacitor, i_c(t) for time t greater than or equal to zero if the following  statements apply. 1. Vc(t=0) = 5V 2. The switch is closed from t = - infinity to t = 0.2 seconds, when it opens.
What is the total cost of the 2 day reduction : Assuming no other paths become critical, what action would you take to reduce the critical path 1 additional day?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the normal strain and elongation of the plate

A square plate of titanium is 12cm along the top, 12cm on the right side, and 5mm thick. A normal tensile force of 15kN is applied to the top side of the plate. A normal tensile force of 20kN is applied to the right side of the plate.

  What is the system reliability for a light panel containing

What is the system reliability for a light panel containing 12 light bulbs, and only requires 9 bulbs to be working for success (only 3 failures allowed). The reliability performance of the bulbs is based on the exponential reliability distributio..

  What is the gain of the filter at the cutoff frequency

A)Design a high-pass filter with a cutoff frequency of 40 kHz. Use 0.01 uF capacitor and an appropriate resistor. B) Sketch and label the circuit. C) What is the gain of the filter at the cutoff frequency Give your answer both as ratio (Vout/Vin) ..

  Determine closed-form expression of the cross-correlation

Compute and plot the correlation sequences r s1s2 (l), r s0s0 (l), r s1s0 (l) and r s2s0 (l) . Compute and plot the cross-correlation sequences and of the received signal with the template signals and s 2 (n).

  Explain what should the signal definitions be

What should the signal definitions be for the equations, such that the minimal about of hardware (gates) are used assuming we have an abundance of NAND gates Show the signals definitions and resulting circuitry.

  Explain what is the shape of the spectrum of the signal

What is the shape of the spectrum of the signal? What is the extent of the spectrum in the frequency domain? What is the unit that is applied to the magnitude of the spectrum?

  Explain a cable tv company delivers video signals

A cable TV company delivers video signals over coaxial cable to individual houses. Video signals occupy a bandwidth of 6 MHz and are stacked in frequency from 50 MHz to 656 MHz without guard bands

  What are the exact form of the equations

What are the exact form of the equations for the 2nd-order step response for the underdamped, critically-damped, and overdamped conditions.

  Calculate the core parameters rc and xm

The open circuit test on a single-phase 15kVA, 7500/480 V, 60 Hz distribution transformer yielded the following: V = 7500V; I = 0.2006A; P = 180W Calculate the core parameters RC and XM and the magnetizing current IM.

  How many samples of actual data are needed to resolve signal

a) Based on your decision create a sampled signal of the sum of the two sines, and plot the magnitude of the zero centered FFT with property frequency annotation. Did it work Check with the data tip tool.

  What is the torque when the antenna gets to within 5 degrees

A proportional controller for a rotating antenna has a gain Kp of 5 in-oz/deg. The antenna was initially pointing due south, but was then commanded to point southeast. What is the torque when the antenna gets to within 5o

  Calculate the reluctance of the magnetic circuit

A ‘c-core' inductor has a total air-gap length of 3 mm and a cross-sectional area of 100 cm2. Two coils are wound on the core - one of 500-turns and another of 250-turns. Assuming the iron reluctance, fringing flux and leakage flux to be negligibl..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd