What distance will the concentration of the metals be

Assignment Help Civil Engineering
Reference no: EM13559088

Another way to treat acid mine drainage is to add limestone at the beginning of a narrow AMD stream to precipitate the metals. The first order rate constant is 10/day. Assume the stream is 3ft wide and 1ft deep (assume a rectangular cross section. If the flow throught the stream is 1000 gallons/day and the concentration at the beginning of the stream is 250 ppm, at what distance will the concentration of the metals be 5 ppm

Reference no: EM13559088

Questions Cloud

What is the doppler shift in the frequency heard : A state trooper chases a speeder along a straight stretch of road;both vehicles move at 160 km/h. What is the Doppler shift in the frequency heard by the speeder
Calculate the euler buckling load for a mild steel rod of : Calculate the Euler buckling load for a mild steel rod of length 5m and diameter 25mm when pinned at each end and axially loaded. If this rod is to be used again with an initially straight axis, determine the maximum permissible
The planning process for the upcoming holiday season : The planning process for the upcoming holiday season?
Types of structures that can be analysed using the package : Search the web or visit a local drawing office to find a commercially available structural analysis package (or one that you are already familiar with). Describe, using your own words, the following features of the package:
What distance will the concentration of the metals be : Another way to treat acid mine drainage is to add limestone at the beginning of a narrow AMD stream to precipitate the metals. The first order rate constant is 10/day. Assume the stream is 3ft wide and 1ft deep
Design a hardwood beam to support a uniformly distributed : Design a hardwood beam to support a uniformly distributed load of 20 kN over a simply supported span of 8 m. consider bending strength only. Assume that the weight of the beam is 2 kN.
S-p-o model of healthcare quality : S-P-O Model of Healthcare Quality
Determine the present worth after taxes : Inital Cost=$40,000, Estimated Salvage Value (@ year 5)=18,000, Actual Salvage Value (@ yr.5)=20,000, Depreciation: Straight-Line (No half -year convention), Life=5yrs, Annual Benefit=10,000, and tax rate=34%.
Does pay motivate employees : Does pay motivate employees? Why or why not?

Reviews

Write a Review

Civil Engineering Questions & Answers

  A root of the linear portion of the stress strain relation

A 32mm rebar with a guage length of 200mm was subjected to tension to fracture according to ASTM E-8 method. The load and deformation data were as shown in table below.

  Composition of the remaining liquid phase

At what temperature does the liquid solidify? What is the composition of this last remaining liquid phase?

  What is the dry unit weight, the saturated unit weight

What is the dry unit weight, the saturated unit weight, and the buoyant unit weight, of a soil having a void ratio of 0.5 and a value of Gs of 2.7?

  Use a numerical method to estimate the excess pore pressure

At the site of a large scale land reclamation project 2 m of sand overlie a silty clay layer 5 m thick, which overlies highly fractured permeable rock.

  How much power will be required

A 12 in diameter pipe, 9200 f t long (f = 0.024) discharges freely into the air at an elevation 18 f t below the surface of the water at intake. It is necessary to double the flow by inserting a pump at upstream end of pipe, If the efficiency of the ..

  What horizontal force on each lower bar is necessary to keep

A third similar bar is placed on the other two in the groove between them. Neglecting friction, what horizontal force on each lower bar is necessary to keep them together.

  What runoff volume will show up in nearby stream to baseflow

If a watershed of drainage area 100 mi^2 has abstractions of 2.5 in/hr, what runoff volume will show up in the nearby stream in addition to baseflow for a rainfall of 5-hr duration with an intensity of 4 in/hr

  Determine shear stress in 25 by 50 cm rectangular section

Determine the shear stress in a 25 × 50 cm rectangular section if the shear force is 20 KN and torsional moment is 10 KN m at service loads. Assume M20 mix and 0.75% tension reinforcement at an effective cover of 50 mm.

  Calculate and plot the distribution of total and stresses

A borehole at a site reveals a soil profile comprising 6 m deep fine sand layer overlying a 9 m thick clay layer, which in turn overlies weathered bedrock. The groundwater table is located at a depth of 4 m from the ground surface.

  Magnitude of the acceleration of the train

The train passes point A with a speed of 30 m/s and begins to decrease its speed at a constant rate of at = - 0.25 m/s2. Determine the magnitude of the acceleration of the train when it reaches point B, where sAB = 412 m.

  Calculate amount of suspended solids accumulating each day

A sedimentation basin is used to remove suspended solids from a wastewater. The rate of flow of wastewater into the tank is 10 L/s, and the influent concentration of suspended solids is 200 mg/L.

  What is the eutectoid cementite content of the sample

You have a steel alloy with a 1.00 wt% carbon content that is cooled to room temperature. What is the eutectoid cementite content of this sample

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd