What did you learn about communication

Reference no: EM131998817 , Length: word count:350

Part A - Project Plan

This assignment is based on the Cornerstone Securities case study.

Now that the project plan has been approved by the Project Sponsor and the Executive Team the next step in Cornerstone's Project Management Methodology is the ‘detailed planning'.

As the Project Manager, you must now develop the project plan to finish the project. The project plan will be used to present the detailed parameters of the project for signoff by the Project Sponsor and Executive Team of Cornerstone Securities. If these detailed parameters of the project are accepted, then the project may proceed to the project execution phase.

As detailed in the assignment 2 template, group submitted the project plan must include:

1. Document Purpose

2. Project Background

3. Project Objectives

4. Project Stakeholders

5. Project Value Statement

6. Project Constraints

7. Project Scope (product-oriented only)

8. Task List (showing task names and deliverables linked to each scope item)

9. Project Budget (showing a breakdown of the budget allocation)

10. Project Time Estimate (a justified time estimate)

11. Quality Management Plan

12. Risk Management Process

13. Project Monitoring and Control

14. Implementation Strategy

15. Recommendations(s) and Approvals

It is envisaged that your project plan will be approximately 25 pages in length (excluding title page, table of content, and appendices).

Part B - Personal Reflection

Each group member will write a personal reflection addressing the following four (4) points:

1. In regards to the feedback you received for Assignment 1, how did you respond to and incorporate this into the group submission of Part A Project Plan

2. Describe the allocation of Part A Project Plan work amongst the group members.

3. Describe how the group worked together to submit an appropriate Part A Project Plan

4. What did you learn about communication and collaboration and how you might use this in a current or future workplace or in another groupwork assignment?

It is envisaged that your personal reflection will be approximately 500 words in length.

Attachment:- Case Study and Template.rar

Reference no: EM131998817

Questions Cloud

Summarize the results of the hearing : Discuss the health problem being presented in the hearing and why is it important for politicians to address this problem through policy.

Discuss the strategic planning process : Describe the steps in the decision-making process, and predict how the personal attributes of the manager influence decision making.

Factor-price equalization theorem : The factor-price equalization theorem indicates that with free trade the real wage earned by labor becomes equal to the real rental rate earned by landowners.

Calculate the price elasticity of demand at the equilibrium : Please calculate the price elasticity of demand at the equilibrium.

What did you learn about communication : Describe how the group worked together to submit an appropriate Part A Project Plan - What did you learn about communication and collaboration and how you might

What kind of market events would result in disequilibrium : What kind of market events would result in disequilibrium? How would this disequilibrium affect the economic markets?

What specific diagnostic examinations would you recommend : What specific diagnostic examinations would you recommend? Why? How would you distinguish between these conditions?

Determine what potential ethics are involved : You need to hire contractors for the electrical work. You also know that getting the permits is going to be very difficult and my delay your project.

What are the effects of raising the minimum wage : What are the effects of raising the minimum wage? How do economists know what the minimum wage should be?

Reviews

len1998817

5/28/2018 4:40:03 AM

Part A (Group mark) Appropriate layout, style, use of language and template etc. 3 marks Points 1-6, 15 - relevant and appropriate to a project plan and / or the solution 4 marks Points 7 & 8 (Product-Oriented Scope & Task List) relevant and appropriate to a project plan and /or the solution 4 marks Points 9 - 14 - relevant and appropriate to a project plan and /or the solution 9 marks Total Group Mark 20 marks Non Submission of Part A 0 marks Part B (Individual mark per student) Student Reflection 10 marks

len1998817

5/28/2018 4:39:38 AM

This assignment is based on the Cornerstone Securities case study (attached). Now that the project plan has been approved by the Project Sponsor and the Executive Team the next step in Cornerstone's Project Management Methodology is the 'detailed planning'. As the Project Manager, you must now develop the project plan to finish the project by 31st. The project plan will be used to present the detailed parameters of the project for signoff by the Project Sponsor and Executive Team of Cornerstone Securities. If these detailed parameters of the project are accepted, then the project may proceed to the project execution phase.

Write a Review

Required(*) Message

Civil Engineering Questions & Answers

Determine the optimal amount of space rays and zappers

Galaxy Industries is a manufacturing company that produces two toy doll models: the Space Ray and the Zapper. The Space Ray can be sold for a profit of $8/dozen and a profit of $5 can be made if a dozen of Zappers are sold.

Determine the detention time within the tubes in minutes

Consider a high-rate sedimentation basin with tube settlers. The basin is 120 feet long and 30 feet wide. The length of the basin covered by tube settlers is 90 feet. The water depth is 15 feet.

Show how kh and kow can be used to describe koa

Show how Kh, and Kow can be used to describe Koa. You must show how the concentration units for all equilibrium distribution ratios either cancel or remain to give the final value for Koa. Octonal-air partitioning coefficient (Koa = C(octanol)/C(a..

Calculate what is the surface area of the disk rotor

During frequent braking under race conditions the disk brake rotors on the car described above reach a temperature of 500C. These disk brakes rely on forced convection to cool them.

Design the column including cross-sectional dimensions

A tied short column of square cross-section is subjected to a factored axial load of 2500 kN and a factored bending moment of 175 kN.m. Use a 40 mm clear cover to the ties and a 20 mm maximum aggregate size.

Illustrate and annotate the lever system

a wheel barrow is used to lift a 200lb load. the lenght from the wheel axle to the center of the load is 2ft. the length from the wheel and axle to the effort is 5 ft. illustrate and annotate the lever system.

Calculate average gas temperature in upper layre of room

A steady fire with an energy release rate of 500 kW occurs in a room 3m wide, 3m long, and 2.4 m high, with a door opening which is 1.8 m high and 0.6m wide. the ambient temperature is 20 degree celcius.

What is elevation of b by neglecting curvature and reaction

The line of sight of a level falls at a rate if 0.122ft/ 100 ft when the level bubble is centered. A backsight of 4.782 is taken on point A, which is at 75 ft from the level. the elevation of a is 425.238 ft.

Define coil spring which has been compressed

Question about Spring, A 37kg object is placed onto a coil spring which has been compressed 43mm. The force used to compress the spring was 35KN.

Determine the level of service for the segment

Determine: a. the Level of Service for this segment; b. the loss in Level of Service, if due to construction the lane width is reduced to 10 feet and there are concrete barriers one foot away from either end of the pavement.

Where does the maximum elastic strain occur in the pipe

Steel pipe employed for oil drilling operations is made up of many segments joined sequentially and suspended in an oil well. Suppose the pipe used in one such application has an outer diameter of 7.5cm and an inner diameter of 5cm, a density of 7.90..

Obtain the dimensionless groups that charactrize the problem

The power loss, p , in a journal bearing depends on length, L; diameter, D; clearance, c; and rotational speed, w. You also have to worry about lubricant viscosity, density, and pressure. Obtain the dimensionless groups that charactrize this probl..

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

User Account

All Pages