What are the values of the rise time and response time

Assignment Help Electrical Engineering
Reference no: EM13228168

A thermometer, initially at a temperature of 75 degrees Fahrenheit is suddenly immersed into a tank of water with a temperature of 180 degrees Fahrenheit. The time constant of the thermometer is 4 s. What are the values of the rise time and the 90% response time?

Reference no: EM13228168

Questions Cloud

Neutralization from hydrochloric acid and sodium hydroxide : The molar heat of neutralization from hydrochloric acid and sodium hydroxide is -57.3 kJ/mol. use this accepted value to predict the heat evolved
How can target replenish the stock of eggs : Instead of using Hickman's pallets Target should provide them with Pallets so that there isn't any error while changing the pallet and keep extra cases in trucks so that in case any specific store needs eggs it can be provide in short notice.
Explain order of increasing strength as reducing agents : Place the following in order of increasing strength as reducing agents (all under standard conditions). (Use the appropriate symbol to separate substances in the list.) Cr3+, H2, Zn, Li, F -, Fe2+
Explain a solution contains a mixture of cl-and br-ions : A solution contains a mixture of cl- and br- ions . can both be positively identified? write appropriate equations to support your
What are the values of the rise time and response time : A thermometer, initially at a temperature of 75 degrees Fahrenheit is suddenly immersed into a tank of water with a temperature of 180 degrees Fahrenheit. The time constant of the thermometer is 4 s.
Depict the structure of the alkyne : An alkyne of six carbon atoms gives the same single product in its reaction either with BH3 in THF followed by H2O2 /OH-, or with H2O/Hg2 /H3O . Draw the structure of the alkyne (containing only carbon and hydrogen atoms).
What are the determinants of health in humans : Discuss the ways that health can be conceptualized by a society - what are the determinants of health in humans?
Explain solution of the weak base amonia : 25mL of a .10M solution of the weak acid hydrofluoric acid, HF, is titrsted with .10M solution of the weak base amonia, NH3. Will the pH at the equivilance point be less than 7 equal to 7 or greater than 7? Explain. Ka for HF is 7.2e-4 and Kb for ..
Determine the range of the gain for which system is unstable : The loop transfer function of a single-loop negative feedback system is: L(s) = Gc(s)G(s) = K(s + 2.5)(s + 3.2) / (s2(s + 1)(s + 10)(s + 30)) This system is called conditionally stable because it is stable only for a range of the gain K

Reviews

Write a Review

Electrical Engineering Questions & Answers

  How much should be deposited

An indiviual wishes to deposit an amount of money now and $100 every six months so that at the end of five years $1500 will have been accumulated. With interest 4% per year, compounded semiannually, how much should be deposited?

  Determine the value of r2 in ohms

Two resistances R1 and R2 are connected in series. We know that R1=60 ohms and that the voltage across R2 is three times the value of the voltage across R1. Determine the value of R2.

  Determine the noise on the output as percent fs

A system is needed to measure flow, which continuously cycles between 20 and 30 gal/min with a period of 30 sec. The required output is a voltage varying from -2.5 to +2.5 V for the cycling flow range. The sensor to be used has a transfer function..

  Find the efficiency as an autotransformer delivering rated

A 5 KVA 480/120 V single phase transformer is to be used as an autotransformer to transform a 600 V source to a 480 V supply. As a single phase transformer delivering rated load at 0.8 PF Lag its efficiency.

  What are the four characteristic parameters

What are the four characteristic parameters of transmission line? Which parameter is used to calculate the real loss? Which parameter is used to calculate the charging current? Which parameter is almost negligible and why?

  Calculate power angle if network receives an inductive power

The network voltage is 27 kV. The generator operates with an induced voltage, which is twice the rated line-to-neutral voltage. Calculate the power angle if the network receives an inductive reactive power of 50 MVA.

  Compute the voltage gain assuming beta

BJT Amplifiers Sketch an emitter-follower circuit with R1 = R2 = 50kohm ; RE = 2kohm. The collector of the npn transistor is connected to VCC = 5V and the input signal has an internal resistance, RS = 0.5kohm

  How many ram and rom chips are needed to employ ram chips

A computer employs RAM chips of 256 x 8and ROM chips of 1024 x 8. The computer system needs 2K bytes of RAM, 4K bytes of ROM, and four interface units, each with four registers. A memory-mapped I/0 configuration is used.

  What is the power level entering the first active stage

What is the power level entering the first active stage of the receiver at 1900 MHz being fed by a 25 meter coax with a loss of 20 dB/km, given that the Isotropic Receive Level is -134 dBW and the receiving station has a 1 meter radius dish

  How many bytes of data can we store in the memory

If we use the PC-relative addressing mode, and want to allow control transfer between instructions up to 50 locations away, how many bits of a branch instruction are needed to specify the PC-relative offset

  Find the magnitude of the phase current in the load

A three-phase generator is Y-connected. It has phase voltages of 277 V. A delta-connected load is attached to the lines coming from the generator. Each phase of the load has an impedance of 9/41

  Find the laplace transforms and the region of convergence

By direct integration find the Laplace transforms and the region of convergence of the following functions

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd