What are the transmission losses of the system

Assignment Help Electrical Engineering
Reference no: EM13967272

1. A 12.4-kV single-phase generator supplies power to a load through a transmission line. The load's impedance is Zload = 500<36.87°Ω , and the transmission line's impedance is Zline = 60<60°Ω .

(a) If the generator is directly connected to the load (Figure P3-3a), what is the ratio of the load voltage to the generated voltage? What are the transmission losses of the system?

(b) If a 1:10 step-up transformer is placed at the output of the generator and a 10:1 transformer is placed at the load end of the transmission line, what is the new ratio of the load voltage to the generated voltage (Figure P3-3b)? What are the transmission losses of the system now? (Note: The transformers may be assumed to be ideal.)

1071_mmm.png

Reference no: EM13967272

Questions Cloud

Sketch transformer connection that will do the required job : A 5000-VA 480/120-V conventional transformer is to be used to supply power from a 600-V source to a 120-V load. Consider the transformer to be ideal, and assume that all insulation can handle 600 V. Sketch the transformer connection that wil..
The project manager and customer interface : what did Brown and BWNS do well in this situation? What could have been done better? what factors outside Brown's control interfered with his efforts to work with the utility? what skills does it take to be an effective interface with the customer? H..
Future opportunities for datagate computer inc : Future Opportunities for Datagate Computer Inc. Write a final summary about the future opportunities of your company and your recommendations. How can it measure its success in the future
Organization to analyze trends in supply chain management : Why is important for an organization to analyze trends in supply chain management? What roles do technology and problem solving play in SCM processes and SCM Management? What are the benefits to planning, and what impacts does it have on SCM process?
What are the transmission losses of the system : If the generator is directly connected to the load (Figure P3-3a), what is the ratio of the load voltage to the generated voltage? What are the transmission losses of the system?
Was this an indicator that something was wrong : Do you think that the checklist for expansion in the article would provide an in-depth overview of the company? Which ones do you think would be the most helpful?
Calculating the cost minimization : Carolina Power and Light (CP&L) is a small electric utility located in the Southeast. CP&L currently uses coal-fired capacity to satisfy its base load electricity demand, which is the minimum level of electricity demanded 24 hours per day, 365 day..
This is where your final conclusion for the paper will go : How the new push to go "green" is affecting an LDC - will it help them or hurt them? What global impacts will it have?
Before starbucks enters the chinese market : Before starbucks enters the Chinese market, which business factors should they considered? Does this suffer from the US market. 2) Evaluate Starbucks Statement on social Responsibility for their Various Stakeholders. ---" Since our first store in 197..

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the leading kvars the syncrhonous motor

A 277/480V three phase wye system has the following load: M1- Induction Motor, 50hp, n=0.91, PF= 0.89 at full load. M2- Induction motor, 25hp, n=0.9, PF= 0.9 at full load. R- Heater Load, PF=1 M- A synchronous motor to drive a second 25hp load.

  Determine input admittance yin and swr into waveguide

Slots in the broad wall of a rectangular waveguide scatter power symmetrically, so that they can be modeled as a shunt admittance,Y, in a transmission line. Consider the waveguide structure below, with four equally space slots .68 lambda apart

  Determine how many panels and batteries should be installed

The equipment works in reception mode, 24 hours a day and throughout the year. About 120 daily Call Ringtone, a median time of 3 min duration each, except Saturdays and Sundays, which are carried out almost no calls are carried out.

  Determine the value of the resistance in arm da

An ac bridge has the following constants : arm AB, R= 1,000Ω in parallel with C=0.159μF; BC, R=1,000Ω; CD, R=500Ω; DA, C=0.636μF in series with an unknown resistance.Find the frequency for which this bridge is in balance and determine the value

  Find what donor concentration is needed to current density

In a 10-μm long bar of donor-doped silicon, what donor concentration is needed to realize a current density of 1 mA/μm2 in response to an appliedvoltage of 1V.

  Calculate the value of input and output inductors

Design a 300W PFC BL-Zeta converter operating in DCM (Output Inductor) to maintain a DC link voltage of 100V with percentage ripple of 4%. The permitted ripple in the input side inductor and intermediate capacitor is given as 20%.

  Find the resistance in each case of designing

A young designer, aiming to develop intuition concerning conducting paths within an integrated circuit, examines the end-to-endresistance of a connecting bar 10μm long, 3μm wide, and1μm thick, made of various materials.

  A single silicon photovoltaic cell is found to have an

a single silicon photovoltaic cell is found to have an open-circuit voltage of 0.6 v and a short-circuit current of

  At what time or times is the particle at rest

A particle travels along the x-axis with postion ( measured in meters ) as a function of time ( measured in seconds ): x(t) = 5t^2-7t+2. (a) At what time or times is the particle at rest

  Express the result in cylindrical and rectangular components

Express the field D = ( x + y ) ( x + y ) a)in cylindrical components and cylindrical variables b) Evaluate D at the point where = 2 , = 0.2 , and z = 5, expressing the result in cylindrical and rectangular components.

  What ip address must be used to fetch the instruction

If the phisical memory location is 6521H ad the code segment is 1400H what IP address must be used to fetch the instruction

  Determine and plot the three-phase current commands

In a 2-pole, three-phase PMAC drive, the torque constant and the voltage constant are 0.5 in MKS units. A constant torque of 5 Nm is developed to bring the system from rest to 5000 rpm in 5 seconds.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd