What are the concentrations of ppm

Assignment Help Civil Engineering

Reference no: EM13564953

A sample of air has been collected from above an air stripping tower to evaluate its performance and to determine if toxic air emission standards are being violated. The tem[erature at the time of collection is 18C, and the atmospheric pressure was 740 mm Hg. The concentration in the sample were 4.8 mg/m^3 of benzene, 1.7 mg/m^3 of PCE, and 2.0 mg/m^3 of methylene chloride. What are the concentrations of ppm?

Reference no: EM13564953

Questions Cloud

Calculate the flow in the river just downstream : An industrial wastewater is discharged into a river about 0.5 km downstream from an outfall (discharge) coming from a desalination plant. Upstream of the desalination plant's outfall the river has a flow of 17.8 m3/sec and a total dissolved solids

What are the final concentrations of no no2 and o3 : A dark atmosphere initially contains no ozone (O3), 100 ppb NO, and 100 ppb NO2. The sun comes comes out and the photostationary state relationship below is achieved in a few minutes. What are the final concentrations of NO, NO2 and O3?

Determine the minimum radius of the new curve if the safe : A curve of radius 300 ft and e = 10% is located at the section of an existing rural highway, which restricts the safe speed at this section of the highway to 40% of the design speed.

Find the theoretical carbonaceous oxygen demand : Suppose a ponds water contains 10.0 mg/L of some algae, which can be represented by the chemical formula C6H15O6N. Using the following reactions:

What are the concentrations of ppm : A sample of air has been collected from above an air stripping tower to evaluate its performance and to determine if toxic air emission standards are being violated

Find the value of the kinetic energy correction coefficient : A symmetric compound channel in overbank flow has a main channel with a bottom width of 30 m, side slopes of 1:1, and a flow depth of 3m.

Determine the dry unit weight of compaction in the field : The results of a field unit weight determination test performed by means of the sand cone method are as follows:

Calculate the drawdown at the well use r which is the : A gravel-packed well with an effective diameter of 36 in is to be constructed in an aquifer with T = 2.6 x l04 gpd/ft and S = 2.3 x 10-5. The design flow of the well is 1000 gpm.

What is the average period of time between independent : A 10-cm diameter 2000 m long pipeline connects two reservoirs open to the atmosphere. What is the discharge in the pipeline if the water surface elevation difference of the reservoirs is 50 m? Assume a smooth pipe and ? = 1.2 x 10-6 m2/s. Neglect min..

User Account

All Pages