What are me compositions and fractions of austenite

Assignment Help Mechanical Engineering
Reference no: EM131328322

You need help with these 3 problems to be answered correctly and with an explinations and steps.There are two pictures with three questions, please look and understand them before contacting me as well.

1. An alloy at 1000°C is 3%  carbon by weigm. what are me compositions and fractions of austenite (γ) and cementite (iron carbide) in the mixture?

2416_1.jpg

2. For lead-tin (Pb-Sn) alloy, answer the following questions. Use the space provided below to show all calculations and to answer the questions. For full credit, the phase diagram MUST be clearly marked to help communicate your answers where appropriate. Use a straight edge.

a) If the microstructure of a Pb-Sn alloy at 185°C is composed of 75wt% α and 25wt% liquid, approximately what is the overall composition of the alloy?

b) For the same alloy discussed in part (a) above, if the alloy was cooled from 185°C to 180°C, what would the weight percentage be of primary a and of eutectic structure?

c) For an alloy that is 90wt%Sn, 10wt%Pb, what phases are present at 200°C, and what are their compositions?

d) What is the temperature difference between melting point of pure tin (Sn) and a eutectic composition Pb-Sn alloy?

3. A cylindrical rod of 1040 steel originally 27 [mm] in diameter is to be cold-worked by drawing into wire, maintaining the circular cross section. A cold-worked yield strength in excess of 700 [MPa] and a ductility of at least 14%EL are desired. Furthermore, the final diameter must be 8 [mm] Explain how this can be accomplished. (Hint: % Cold Work Problem)

2272_2_0.jpg

Reference no: EM131328322

Questions Cloud

How people are employed and managed in organisations : According to Armstrong (2009), "the practice of human resource management (HRM) is concerned with all aspects of how people are employed and managed in organisations. It covers activities such as strategic HRM, human capital management, corporate ..
What will happen to ncms adr price : Suppose NCM's stock price rises from ¥1,550 to ¥1,650 per share. If the exchange rate does not change, what will happen to NCM's ADR price?
Downward pressure on treasury yields : Recall that Carson Company has obtained substantialloans from finance companies and commercial banks.The interest rate on the loans is tied to market interestrates and is adjusted every six months. How should Carson interpret the actions by theFed? T..
Determine the sources of capital for canon inc : Determine the sources of capital for Canon Inc. (ticker: J:CN@N) in each of the last five years. How much capital was raised through internal sources, and how much was raised through external sources?
What are me compositions and fractions of austenite : An alloy at 1000°C is 3%  carbon by weigm. what are me compositions and fractions of austenite (γ) and cementite (iron carbide) in the mixture?For lead-tin (Pb-Sn) alloy, answer the following questions. Use the space provided below to show all calcu..
Create a scatter plot of the memory usage of the processes : Create a scatter plot of the memory usage of the processes. Find the following measures of central tendency of the memory usage in kilobytes (Kb): Find the following measures of dispersion of the memory usage in Kb.
Evaluate the customer service standards and strategies : Critically evaluate the customer service standards and strategies adopted by EE. Please make the necessary recommendations that will enhance the customer service levels. You are required to use a wide range of relevant literature to support the..
Generous gift in terms of the future value of the asset : To celebrate your nephew's first birthday, you are considering buying him a bond or depositing money in a savings account. If you ignore tax and other fee implications, which of the following options is the MOST generous gift in terms of the future v..
Actions are likely to increase stock market efficiency : Evaluate whether the following actions are likely to increase stock market efficiency, decrease it, or leave it unchanged, and explain why. You are valuing an Indian company in rupees. The current exchange rate is Rs 45 per dollar and you have been a..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the maximum centric force which can be applied is

a 1.5 m concrete post is reinforced with six steel bars each with a 28mm diameter. knowing that es 200 gpa and ec 25

  Find out the coefficients m and b of the function you

below is measured voltage v at different time stimes nbsp nbsp nbspnbsp 0nbspnbspnbspnbsp 0.5nbspnbsp 1nbspnbsp 1.5nbsp

  Calculate the force in the cord

The volumetric weight of the wood is 9.0 kN/m3, and the volumetric weight of the water is 10.0 kN/m3. Calculate the force in the cord.

  Masses connected together with a mass less rigid-link

Given three masses connected together with a mass less rigid-link, where should you place the single mass if you want to replace these masses with it?

  Te rate of energy transfer by convection from the

electronic components mouted on a flat plate are cooled by convection to the surroundings and by liquied water

  Design a flat roof meeting certain mechanical performance

Design a flat roof meeting certain mechanical performance criteria. The basic structure of the roof is a series of rectangular-section 'joists', made from softwood, that span the space to be covered by the roof.

  The upper half of the container holds steam of density

a transparent rigid sealed container has a volume of 10m3. the upper half of the container holds steam of density 5kgm3

  Determine the change in entropy of the system

A rigid vessel contains 10 kg of steam. The steam is initially at 10 bar and 300C. After a period of time the pressure in the vessel is reduced to 1 bar due to heat transfer with the surroundings. The surroundings are at a constant temperature of 20C..

  Flow of clockwise vortex of circulation gamma

Consider the flow of clockwise vortex of circulation gamma and a source of strength Q, both located at the origin. Show that the result is a spiral flow in which the velocity is everywhere inclined at the same angle to the radius vector from the orig..

  Turbulent ?ow from the leading edge

Water at 20-C ?ows over a 3-m long and 2-m wide ?at plate at 3 m=s. Assume a turbulent ?ow from the leading edge (a trip wire at the leading edge can be used to cause the turbulence) and calculate:

  If the design stress is one-half the yield strength and the

a structural component in the form of a wide plate is to be fabricated from a steel alloy that has a plane strain

  Estimate the pressure drop across the honeycomb

The inlet flow is air at 110 kPa and 20°C, moving at an average velocity of 6 m/s. Estimate the pressure drop across the honeycomb.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd