Well-insulated heat exchanger is used to heat water

Assignment Help Mechanical Engineering

Reference no: EM13719981

A well-insulated heat exchanger is used to heat water (cp = 4.18 KJ/kg*K) from 300 K to 90°C with a mass flow rate of 3 kg/s. Heat is supplied by hot oil (cp = 2.3 KJ/kg*K) that enters the heat exchanger at 200°C with a mass flow rate of 15 kg/s. Determine the exit temperature of the oil, and the entropy generation of the heat exchanger. If instead of making this calculation, you had measured the exit temperature of the oil at 300K, comment on whether or not this is possible? Is your thermometer broken?

Reference no: EM13719981

Questions Cloud

Isolated system consists of a closed copper vessel of mass : An isolated system consists of a closed copper vessel of mass 0.1 kg, containing 1 kg of liquid water, each initially at 5°C, immersed in 20 kg of liquid water, initially at 20°C. The system is allowed to come to equilibrium. Determine the final temp..

Explain the impact of globalization on u.s. businesses : paper that describes the impact of globalization on U.S. businesses. In your analysis, please include information about the impact of at least four economic drivers that might impact globalization.

Summative assessment business administration : SUMMATIVE ASSESSMENT BUSINESS ADMINISTRATION, RISK MANAGEMENT AND FINANCIAL MANAGEMENT

Constant specific heat ratio at the average temperature : Air undergoes an isentropic process from P_1 = 100 kPA and T_1 = 300 K to a final state where the temperature is 700 K. Assuming an ideal gas, find P_2 using both the ideal gas tables and assuming a constant specific heat ratio at the average tempera..

Well-insulated heat exchanger is used to heat water : A well-insulated heat exchanger is used to heat water (cp = 4.18 KJ/kg*K) from 300 K to 90°C with a mass flow rate of 3 kg/s. Heat is supplied by hot oil (cp = 2.3 KJ/kg*K) that enters the heat exchanger at 200°C with a mass flow rate of 15 kg/s.

Steam turbine operates at steady state with inlet conditions : Steam leaves the turbine at a pressure of 1 bar. The turbine is adiabatic and kinetic and potential energy changes are negligible. If the isentropic turbine efficiency is 75%, determine the work per unit mass flow in KJ/kg, and plot on an h-s diagram..

Homogeneous liquid solidifies directly to a solid containing : A “friend” asks you to construct the phase diagram for a new binary alloy of A and B. The clues are: (i) A and B are completely immiscible in each other and no solid solutions exist in the diagram, (ii) no stoichiometric compounds exist in the diagra..

Determine the cut-off ratio and engine efficiency : According to data provided by Motor Trend, the 2011 Chevrolet Silverado Diesel HD is powered by an 8 cylinder diesel engine having a total displacement of 6599 cc (6.599 L). The compression ratio is 16:1, and the total power output is 397 hp (296.0 k..

A torsional helical spring is used to hold a door closed : A torsional helical spring is used to hold a door closed. The handle on the door is located 30 inches from the center of the torsional helical spring. The pull on the handle should be 1 pound when the door is closed and 3 pounds after the door has ..

User Account

All Pages