Volumetric analysis of a mixture of a mixture of gases

Assignment Help Mechanical Engineering

Reference no: EM13718935

The volumetric analysis of a mixture of a mixture of gases is 30 percent oxygen, 40 percent nitrogen 10 percent dioxide, 20 percent methane. This mixture flows through a 1-in-diamter at 1500 psia and 70F with a velocity of 10 ft/s. Determine the volumetric mass flow rates of this mixture (a) treating it as an idea gas mixture, (b) using a compressibility factor based on Amagad's law of volumes and (c) using kay's psuedocritical pressure and temperature.

Reference no: EM13718935

Questions Cloud

Calculate the turbines isentropic efficiency : Water vapour enters an adiabatic turbine at a flow rate of 820 L/s. The turbine expands the water from 10 MPa and 600oC to 8 kPa and a quality of 0.9. Kinetic energy and potential energy effects can be ignored.

What is the rate of work if isentropic efficiency : A turbine receives 10 kg/s of steam at a state of p1 = 5 bar, t1 = 400?c and exhausts to a pressure of p2 = 1.5 bar. The ambient temperature is t0 = 300c and the ambient pressure is p0 = 1 bar. What is the rate of work if isentropic efficiency is 75%..

Determine the maximum shear stress in the shaft : A hydrofoil boat has an AISI 1020 Hot Rolled steel propeller shaft that is 100 ft. long. It is connected to an in-line diesel engine that delivers a maximum power of 2500 hp and causes the shaft to rotate at 1700 rpm. If the outer diameter of the sha..

Determine the resulting mixtures volume : 77 lbm of a gas whose density is .0007 lbm/ft^3 is mixed with 1.81 lbm of a gas whose density is .0018 lbm/ft^3 such that the pressure and temperature of the gases do not change. Determine the resulting mixtures volume (ft^3) and specific volume (ft^..

Volumetric analysis of a mixture of a mixture of gases : The volumetric analysis of a mixture of a mixture of gases is 30 percent oxygen, 40 percent nitrogen 10 percent dioxide, 20 percent methane. This mixture flows through a 1-in-diamter at 1500 psia and 70F with a velocity of 10 ft/s. Determine the volu..

Determine the pressure after the first stage compressor : A two-stage compressor is used to compress air from 100 kPa at 298 K to 900 kPa at a rate of 0.5 kg/s. After the first stage compressor, an intercooler isobaric ally cools the air to 350 K before entering the second compressor stage.

Rate of heat exchange per square meter between two surfaces : Two horizontal surfaces separated by a 125-mm layer of air have upper and lower temperature of 300k and 350k, respectively. Determine the rate of heat exchange per square meter between the two surfaces?

What is the liability of a retiring partner : What is the liability of a retiring partner in respect of his partnership depts incurred both before and after his retirement?

Determine the launch opportunities per day : Sea Launch mission planners are going to launch their Russian launch vehicle from an Lo = 5 degrees into LEO with an inclination. How many launch opportunities will there be per day and why.

User Account

All Pages