Reference no: EM13706992
A plastic was stretched initially from 30 mm to 35 mm and then released at room temperature. The length changes with time were obtained as the following. Assume the Voigt model can be applied for this mechanical behavior.
Time (hr) - 0, 1, 3, 7.5, 12
Length (mm) - 35.000, 32.509, 30.632, 30.113, 30.028
A) What is the retardation time (hours)?
B) What is the strain (%) after 75 minutes?
C) What percent of the initial strain is recovered after 75 minutes?
D) How long does it take for 50% of the strain to be recovered?
E) If the test was made at body temperature, would you expect the recovery to be faster, slower, or the same compared to the room temperature test?
Assuming ideal gas behavior of the air
: 10 ft3 of air initially at 550 0R, 100 psi undergoes a polytropic process pV1.2 = constant to a final pressure of 50 psi. The work of the process is 100 Btu. Assuming ideal gas behavior of the air, determine (a) the mass of air in lb, (b) the final v..
|
Find the magnitude of the force that unknown charge exerts
: A charge of -0.600microColoumbs exerts an upward 0.250N force on an unknown charge 0.250m directly below it. What is the magnitude of the force that the unknown charge exerts
|
What is the elastic modulus of the suture
: A size 4-0 (0.15mm diameter) monofilament nylon suture was tested for its stress relaxation properties using a micro-mechanical tester at room temperature. A 20 mm sample was stretched 2 mm over a 20 second period; the force-displacement curve for th..
|
What is the sign and magnitude of charge
: Three point charges are arranged on a line. q3 = + 5.00 nC and is at the origin. What is the sign and magnitude of q1 if the net force on q3 is zero
|
Voigt model can be applied for this mechanical behavior
: A plastic was stretched initially from 30 mm to 35 mm and then released at room temperature. The length changes with time were obtained as the following. Assume the Voigt model can be applied for this mechanical behavior.
|
How much time is needed for the plane to clear intersection
: A Boeing 747 "Jumbo Jet" has a length of 56.1 m. The runway on which the plane land intersects another runway, the width of the intersection is 26.3 m. How much time is needed for the plane to clear the intersection
|
Air in a piston-cylinder initially
: 10 kg of air in a piston-cylinder initially at 0.5 Mpa, 227 Celsius, undergoes two processes in series. constant temperature expansion to triple the volume. constant volume heating to the initial p = 0.5 MPa.
|
Compute how long does it take to hit the ground
: During liftoff, a hot-air balloon accelerates upward at a rate of 3.5m/s2. The balloonist drops an object over the side of the gondola when the speed is 15 m/s. How long does it take to hit the ground
|
Mass flow rate of steam entering the first stage of turbine
: Water is the working fluid in a regenerative Rankine cycle with one closed feed water heater and one open feed water heater. Steam enters the turbine at 1400 psi and 1000 F and expands to 500 psi, where some of the steam is extracted and diverted to ..
|