Reference no: EM132961552

CSI6208 Programming Principles - Edith Cowan University

Programming project - "Fast-Food Quiz" Program

Assignment Overview
You are required to design and implement two related programs:
• "admin.py", a CLI program that allows the user to add, list, search, view and delete nutritional information about fast food menu items, and stores the data in a text file. Develop this program before "foodquiz.py".
• "foodquiz.py", a GUI program that uses the data in the text file to quiz the user about the nutritional information of the fast-food menu items. Develop this program after "admin.py".

Requirements of "admin.py"
In the following information, numbered points describe a requirement of the program, and bullet points (in italics) are additional details, notes and hints regarding the requirement. Ask your tutor if you do not understand the requirements or would like further information. The requirements are:

1. The first thing the program should do is try to open a file named "data.txt" in read mode, then load the data from the file into a variable named data and then close the file.
»» The data in the file should be in JSON format, so you will need to use the "load()" function from the
"json" module to read the data into your program. See the earlier page for details of the structure.
» If any exceptions occur (e.g. due to the file not existing, or it not containing valid JSON data), then simply set the data variable to be an empty list. This will occur the first time the program is run, since the data file will not exist yet. This ensures that you are always left with a list named data.
» This is the first and only time that the program should need to read anything from the file. After this
point, the program uses the data variable, which is written to the file whenever a change is made.

2. The program should then print a welcome message and enter an endless loop which starts by printing a list of options: "Choose [a]dd, [l]ist, [s]earch, [v]iew, [d]elete or [q]uit." and then prompts the user to enter their choice. Once a choice has been entered, use an "if/elif" statement to handle each of the different choices (detailed in the following requirements).
» This requirement has been completed for you in the starter file.

3. If the user enters "a" (add), prompt them to enter all 7 details of a fast-food item, beginning with the name. Place the details into a new dictionary with the structure shown earlier, and append the dictionary to the data list. Finally, write the entire data list to the text file in JSON format to save the data.
» Use your "input_something()" function (detailed below) when prompting the user for the name
of the item, to ensure that they are re-prompted until they enter something other than whitespace.
» Use your "input_int()" function (detailed below) when prompting for the nutritional details of the item, to ensure that the user is re-prompted until they enter an integer.
» Your prompts for input should specify that energy is measured in kilojoules, while fat, protein carbohydrates and sugars are measured in grams, and sodium is measured in milligrams.
» Once the dictionary for the new item has been appended to the data list, call your "save_data()" function (detailed below) to write the data to the text file in JSON format.

4. If the user enters "l" (list), print the names of all items in the data list, preceded by their index number plus 1 (so that the list starts from 1 rather than 0).
» If the data list is empty, show a "No items saved" message instead.
» Use a "for" loop to iterate through the items in the data list. Remember: each item is a dictionary.
» You can use the "enumerate()" function to ensure that you have access to variables containing the
index number and dictionary of each item as you loop through them (see Lecture 3).

5. If the user enters "s" (search), prompt them for a search term and then list the items that contain the search term in their name. Include the index number plus 1 of the item next to each result. Display search results in the same way that you display items when listing them.
» If the data list is empty, show a "No items saved" message instead of prompting for a search term.
» Use your "input_something()" function (detailed below) when prompting the user for a search
term, to ensure that they are re-prompted until they enter something other than whitespace.
» The code to search will be similar to the code used to list, but this time the loop body needs an "if" statement to only list items that contain the search term (use the "in" operator - see Lecture 3).
» Ensure that the searching is not case-sensitive, e.g. "mac" should find an item named "Big Mac".
» If the search term is not found in the name of any items, show a "No results found" message.

6. If the user enters "v" (view), prompt them for an index number and then print the corresponding item's name and all of its nutritional information, including the units of measurement.
» If the data list is empty, show a "No items saved" message instead of prompting for index number.
» Use your "input_int()" function (detailed below) when prompting for an index number, to ensure
that the user is re-prompted until they enter an integer.
» Remember: Index numbers shown to/entered by users start from 1, but the data list starts from 0.
» Print an "Invalid index number" message if the index number entered does not exist in the data list.
» When viewing an item, also show the number of calories (rounded up to the nearest whole number) in
parentheses after the energy in kilojoules. 1 kilojoule is 0.239 calories.

7. If the user enters "d" (delete), prompt them for an index number and then delete the corresponding item's dictionary from the data list, then print a confirmation message.
» If the data list is empty, show a "No items saved" message instead of prompting for index number.
» Use your "input_int()" function (detailed below) when prompting for an index number, to ensure
that the user is re-prompted until they enter an integer.
» Remember: Index numbers shown to/entered by users start from 1, but the data list starts from 0.
» Print an "Invalid index number" message if the index number entered does not exist in the data list.
» Include the name of the item in the confirmation message, e.g. "Big Mac deleted."
» Once the item has been deleted from the data list, call your "save_data()" function (detailed
below) to write the data to the text file in JSON format.

8. If the user enters "q" (quit), print "Goodbye!" and break out of the loop to end the program.

9. If the user enters anything else, print an "Invalid choice" message (the user will then be re- prompted for a choice on the next iteration of the loop).

Functions in "admin.py"
The requirements above mentioned 3 functions - "input_int()", "input_something()", and "save_data()". As part of "admin.py", you must define and use these functions.

1. The "input_int()" function takes 1 parameter named prompt - a string containing the message to display before waiting for input. The function should repeatedly re-prompt the user (using the prompt parameter) for input until they enter an integer that is greater than or equal to 0. It should then return the value as an integer.
» See Workshop 4 for a task involving the creation of a very similar function.

2. The "input_something()" function takes 1 parameter named prompt - a string containing the message to display before waiting for input. The function should repeatedly re-prompt the user (using the prompt parameter) for input until they enter a value which consists of at least 1 non-whitespace character (i.e. the input cannot be nothing or consist entirely of spaces, tabs, etc.). It should then return the value as a string.
» Use the "strip()" string method on a string to remove whitespace from the start and end.
If a string consists entirely of whitespace, it will have nothing left once you strip the whitespace away.
» Note that exception handling is not needed in this function.

3. The "save_data()" function takes 1 parameter named data_list (the data list from the main program). The function should open "data.txt" in write mode, then write the data_list parameter to the file in JSON format and close the file. This function does not return anything.
» This is the only part of the program that should be writing to the file, and it always overwrites the entire
content of the file with the entirety of the current data.
» See Reading 7.1 for an example of using the "json" module. You can specify an additional indent
parameter in the "dump()" function to format the JSON data nicely in the text file.

The definitions of these functions should be at the start of the program (as they are in the starter file provided), and they should be called where needed in the program. Revise Module 4 if you are uncertain about defining and using functions. Ensure that the functions behave exactly as specified; It is important to adhere to the stated function specifications when working on a programming project.

In particular, remember that the "prompt" parameter of the input functions is for the text that you want to show as a prompt. Here is an example of the function being called and its output:

You are welcome to define and use additional functions if you feel they improve your program, but be sure to consider the characteristics and ideals of functions as outlined in Lecture 4.

Optional Additions and Enhancements for "admin.py"
Below are some suggestions for minor additions and enhancements that you can make to the program to further test and demonstrate your programming ability. They are not required and you can earn full marks in the assignment without implementing them.

- When adding an item, check if there is already an item with the same name (case-insensitive) in the data list after the user enters the name of the new item. If you find a match, inform the user and tell them its index number (plus 1) before returning them to the main menu.

- When adding an item, prompt for the name of the fast-food chain (e.g. "McDonald's") as well as the name of the item, storing it with a key of "chain" in the dictionary. Be sure to show the name of the chain when listing, searching and viewing, e.g. "Big Mac (McDonald's)" .
- Also include the name of the chain when displaying item names in "foodquiz.py"
- If implementing this feature as well as the previous one, the program should check whether two items from the same fast-food chain have the same name.

- When viewing an item, also show the percentage of average daily intake that each nutritional component represents, based on an 8700 kilojoule diet.
- According to the Australia New Zealand Food Standards Code, the daily intake values are 70g of fat, 50g of protein, 310g of carbohydrates, 90g of sugar and 2300mg of sodium.

- Add a new menu option of "[b]reakdown" which shows the number of items, and the average value for each of the nutritional components, rounded to 2 decimal places.
- You could expand upon this by also including the name (and amount) of the item(s) with the highest value in each of the nutritional components, or other interesting statistics.

- Allow users to use the search, view and delete options more efficiently by allowing input of "s
<search term>", "v <index number>" and "d <index number>". For example, instead of needing to type "s" and then "mac", the user could type "s mac", and instead of needing to type "v" then "2", the user could type "v 2".
- This feature takes a reasonable amount of extra thought and effort to implement efficiently.

Overview of "foodquiz.py"
"foodquiz.py" is a program with a Graphical User Interface (GUI), as covered in Module 9. It should be coded in an Object Oriented style, as covered in Module 8. Everything you need to know in order to develop this program is covered in the first 9 modules of the unit. This program should be developed after "admin.py".

The entirety of this program can be implemented in under 170 lines of code (although implementing optional additions may result in a longer program). This number is not a limit or a goal - it is simply provided to prompt you to ask your tutor for advice if your program significantly exceeds it. You must use the "tkinter" module and the "tkinter.messagebox" module to create the GUI.

This program uses the data from the "data.txt" file. Similar to the admin program, this program should load the data from the file once only - when the program begins. The program implements a simple quiz by randomly selecting two different fast-food items from the data and one nutritional component (energy, fat, protein, carbohydrates, sugar or sodium), then asking the user which of the two items contains more of that nutritional component.

Question is asked using the currently selected nutritional component, chosen at random.

Left and right buttons contain the currently selected item names, middle button is always the same.

Your program does not need to look the same as this.
Adjust the layout and formatting as desired.

When the user clicks one of the buttons, the program should determine whether their answer is correct and show an appropriate messagebox:

The program continues like this until the user closes it - selecting two random menu items and a random nutritional component each time. It does not need to keep track of a "score" of any kind.

The following pages detail how to implement the program.

Constructor of the GUI Class of "foodquiz.py"
The constructor (the " init ()" method) of your GUI class must implement the following:

1. Create the main window of the program and give it a title of "Fast-Food Quiz".
» You are welcome to set other main window settings to make the program look/behave as desired.

2. Try to open the "data.txt" file in read mode and load the JSON data from the file into an attribute named "self.data", and then close the file.
» If any exceptions occur (due to the file not existing, or it not containing valid JSON data), show an error
messagebox with a "Missing/Invalid file" message and call the "destroy()" method on the main window to end the program. Include a "return" statement in the exception handler after destroying the main window to halt the constructor so that the program ends cleanly.
» Once you've loaded the data, check that self.data contains at least 2 items (the minimum needed
for the quiz). If it contains fewer than 2 items, end the program in the same way as described above.

3. Create an attribute named "self.components" and set it to a list containing strings of "energy", "fat", "protein", "carbohydrates", "sugar" and "sodium".
» This will be used in the "show_question()" method to randomly select a nutritional component.
» Make sure that you spell the words exactly the same as the keys of the dictionaries in self.data.

4. Use Label, Button and Frame widgets from the "tkinter" module to implement the GUI depicted on the previous page. The layout is up to you as long as it functions as specified.
» You will save time if you design the GUI and determine exactly which widgets you will need and how to
lay them out before you start writing the code.
» See Reading 9.1 for information regarding various settings that can be applied to widgets to make them appear with the desired padding, colour, size, etc.
» Do not set the text for the buttons that will contain item names at this point. They will be set in the "show_question()" method. See the Discussion Board for help.
» All three of the buttons call the "check_answer()" method when clicked, but each need to pass it a different parameter value - a string of "left", "middle" or "right" (to know which button was clicked). This involves setting the "command" of buttons in a special way. Here is some sample code:

5. Lastly, the constructor should end by calling the "show_question()" method to display the first question in the GUI, and then call "tkinter.mainloop()" to start the main loop.
» To call a method of the class, include "self." at the start, e.g. "self.show_question()".

That is all that the constructor requires. The following pages detail the other methods required, and some optional additions. You are not required to submit pseudocode for "foodquiz.py".

Methods in the GUI class of "foodquiz.py"
This program requires you to define 2 methods to implement the functionality specified - "show_question()" and "check_answer()". These should be defined as part of the GUI class.

1. The "show_question()" method is responsible for randomly selecting two fast-food items and a nutritional component and showing them in the GUI. Simply select two random items from self.data and one random nutritional component from self.components, then use them to set the text for appropriate label and buttons in your GUI.
» This method is called at the end of the constructor to select and show the first question, and at the end
of the "check_answer()" method to select and show the next question.
» Use "random.sample()" to ensure the two items you select from self.data are different. "random.choice()" can be used to select a random nutritional component.
» Store the selected items and the selected nutritional component as attributes (i.e. include "self." at the start of the variable name) so that you can refer to them in the "check_answer()" method.

2. The "check_answer()" method is called when the user clicks one of the buttons. It is responsible for determining whether the user answered correctly and showing an appropriate messagebox, before calling the "show_question()" method to proceed to the next question.
» This method receives a parameter named "choice" that contains a string of "left", "middle" or "right"
depending on which button was clicked.
» If choice is "left" or "right", simply compare the selected nutritional component of the selected items to determine whether the user was correct.
» If choice is "middle", it is correct if the smaller value is at least 90% of the higher value, i.e. if it is
within 10% of it. For example, if the two nutritional values being compared had values of 90 and 100, then the middle button would be correct, but if they had values of 89 and 100 then it would be incorrect.

These methods are all that are required to implement the functionality of the program, but you may write/use additional methods if you feel they improve your program.

Attachment:- Programming Project.rar