Using the same power found in the part a above what would

Assignment Help Mechanical Engineering
Reference no: EM13618309

A heat pump will be used to heat a building during the winter and will then cool the same space during the summer. The rate of heat gain or loss is determined to be 2400 kJ per hour per each degree of temperature difference between the space and the outdoor temoerature. The interioe temperature will be 293 K during the winter, but will be kept at 298 K in the summer.

a) If the outside temperature is 0 deg C, what would be the minimum power to drive the compressor?

b) What would be the coefficient of performance?

c) Using the same power found in the part a above, what would be the maximum outdoor temperature during the summer for this system to operate and maintain the space at 298 K?

d) What would be the coefficient of performance in this mode?

Reference no: EM13618309

Questions Cloud

Is the job change rate at pioneer significantly different : a research study showed that 50 of workers change jobs within 2 years of employment. landy r. took a random sample of
You believe you will spend 40000 a year for 20 years once : you believe you will spend 40000 a year for 20 years once you retire in 40 years. if the interest is 6 per year how
Discuss the concept of sampling distributions and describe : discuss the concept of sampling distributions and describe the rationale for their use in making inferences about
The tires of a car make 71 revolutions as the car reduces : the tires of a car make 71 revolutions as the car reduces its speed uniformly from 95 kmh to 44 kmh . the tires have a
Using the same power found in the part a above what would : a heat pump will be used to heat a building during the winter and will then cool the same space during the summer. the
A company has a project under consideration that will : a company has a project under consideration that will generate an irregular cash flow for the next 10 years. it wants
The blades in a blender rotate at a rate of 6600 rpm when : the blades in a blender rotate at a rate of 6600 rpm. when the motor is turned off during operation the blades slow to
What real amount must you deposit each year to achieve your : you want to have 6 million in real dollars in an account when you retire in 40 years. the nominal return on your
A thin insulating rod is bent into a semicircle arc of : a thin insulating rod is bent into a semicircle arc of radius a and a total electric charge q is distributed uniformly

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the premise of the heuter-volkmann law

What is the premise of the Heuter-Volkmann Law? 7. What did Pauwels propose for stresses associated with tendon development, bone regeneration, and endochondral ossification? What aspects of his beliefs are contrary to the authors?

  If the cylinder is to be protected against excessive

a hydrogen tank 25 cm in diameter and 80 cm in height is charged to 150 atmospheres at room temperature 25 c. a

  If the power output of the turbine is 2 mw determine a the

steam enters an adiabatic turbine steadily at 3 mpa and 400 degree c and leaves at 50 kpa and 100 degree c. if the

  A boat travels at a constant speed of 15 ms around the

a boat travels at a constant speed of 15 ms around the circumference of a half circle in a time span of 45 s. what is

  Compute the concentration of li that is required

Aluminum-lithium alloys have been developed by the aircraft industry to reduce the weight and improve the performance of its aircraft. A commercial aircraft skin material having a density of 2.47 g/cm3 is desired. Compute the concentration of Li (..

  Compute the maximum bending stress at mid-span

Calculate the maximum bending stress at mid-span, and, for the same section, locate the neutral axis. Neglect the weight of the beam

  A balloon behaves so the pressure is p c2v13 c2 100 kpam

a balloon behaves so the pressure is p c2v13 c2 100 kpam. the balloon is blown up with air from a starting volume of

  Cconstant specific heats for air at room temperature

a turbojet aircraft is flying with a velocity of 320 ms at an altitude of 9150 m where the ambient conditions are 32

  Nitrogen at 900kpa and 300oc is expanded adiabatically and

nitrogen at 900kpa and 300oc is expanded adiabatically and reversibly in a closed system to 100kpa. determine the

  A six-station automatic assembly line has an ideal cycle

a six-station automatic assembly line has an ideal cycle time of 12 sec. downtime occurs for two reasons. first

  In a compton experiment an electron attains a kinetic

in a compton experiment an electron attains a kinetic energy of 0.1 mev when a 0.5mev x-ray strikes it. determine the

  What is the most cost-effective way of acquiring the parts

Your engineering firm decides to build a prototype, and needs screw and nut fasteners as well as resistors and LEDs. There are machinists and electronics technicians available for in-house production. What is the most cost-effective way of acquiri..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd