Using air properties for the combustion gases and assuming

Assignment Help Mechanical Engineering
Reference no: EM13643294

Combustion gases enter a gas turbine at 627 °C and 1.2 MPa at a rate of 2.5 kg/s and leave at 527°C and 500 kPa. It is estimated that heat is lost from the turbine at a rate of 20 kW. Using air properties for the combustion gases and assuming the surroundings to be at 25 °C and 100 kPa, determine the a) actual and reversible power outputs of the turbine, and b) exergy destroyed within the turbine.

Reference no: EM13643294

Questions Cloud

Two point charges are separated by 100 cm and have charges : two point charges are separated by 10.0 cm and have charges of 2.00 muc and -2.00 muc respectively. calculate the
The driving force for fluid flow is the pressure difference : the driving force for fluid flow is the pressure difference and a pump operates by raising the pressure of a fluid by
A steam turbine has 7lbmmin of steam entering at 200psi600 : a steam turbine has 7lbmmin of steam entering at 200psi600 degrees f and leaving at 1 psi with a quality of 90.a draw
The asteroid collides perfectly inelastically with the : treat a planet as a uniform density sphere of mass m radius r and rotation period t. a large asteroid of mass am is
Using air properties for the combustion gases and assuming : combustion gases enter a gas turbine at 627 degc and 1.2 mpa at a rate of 2.5 kgs and leave at 527degc and 500 kpa. it
A series rc circuit has a time constant of 10 s the battery : a series rc circuit has a time constant of 1.0 s. the battery has a voltage of 50 v and the maximum current just after
A student weighs 012311 g of na2co3 and dissolves it in : a student weighs 0.12311 g of na2co3 and dissolves it in 50.0 ml of water in an erlenmeyer flask. how many moles of hcl
Two cylindrical resistors are made of the same material the : two cylindrical resistors are made of the same material. the resistors with resistance r1 and r2 have different radii
If the size of the positive charge value is tripled for : if the size of the positive charge value is tripled for both of two point charges to maintain the same mutual force

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  There are straight rectangular fins on the right hand side

heat is uniformly generated at a rate of 2x105 wm3. in a wall of thermal conductivity k 25 wmk and thickness 60mm. the

  384 knowing that the stepped shaft shown tranmits a torque

3.84 knowing that the stepped shaft shown tranmits a torque of magnitude t2.50 kipin determine the maximum shearing

  A commuter train travels along a straight path from the

a commuter train travels along a straight path from the lincoln street stop to the san francisco street stop in six

  At what location s will the combined moment of the weights

At what location S will the combined moment of the weights of the man and platform about point B be zero?

  An energy input as heat of 42 kj was required determine the

ln a study of the properties of a liquid a 2-kg sample of liquid was heated at a constant pressure of 1 atm from 500 to

  Determine the pressure inside the cylinder

If the atmospheric pressure is 90 kPa, determine the pressure inside the cylinder.

  Some gamma rays with a total energy of 4 mev what is the

235u is bombarded with 0.025 ev neutrons. the result of the fissioning of the 235u are 4 neutrons ke 1 mev per neutron

  The water is then heated in a constant volume process until

a closed rigid container contains water at 100 degrees celcius 70 quality. the volume of the container is 0.2m3. the

  A stationary radar operator determines that a ship is 19 km

a stationary radar operator determines that a ship is 19 km south of him. an hour later the same ship is 16 km

  Find the liquid by volume such that the water will pass

a rigid vessel contains saturated water mixture at 1 atm. find the liquid by volume such that the water will pass

  The rate of flow of steam is 05 kgs calculate the quality

steam enters the nozzle of a turbine with a low velocity at 3 mpa 350degc and leaves the nozzle at 1.6 mpa at a

  Calculate the work output per unit time in the turbine if

refrigerant 134a is the working fluid in a solar power plant operating on an ideal rankine cycle. saturated vapor x11.0

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd