User Account

All Pages

Use of aluminium alloys in automotive applications

Assignment Help Electrical Engineering
Reference no: EM13865325

Essay

The use of aluminium alloys in automotive applications is one of the following energy material(s) topics in the world.

  • Write a 2000-2500 word critical evaluation of the lifetime energy inputs to, and outputs from, using this material in its/their appropriate technological setting.
  • You should also consider the environmental impact of the (likely) wastes arising from the production and use of the material(s) including what happens at end-of-life.
  • Social/economic and practical issues associated with obtaining any raw/other materials for use in manufacture should also be taken into consideration.
  • Your evaluation should be supported by correctly-cited references and, where possible, by numerical data for the material(s) you are considering, although we recognise that the amount of numerical data available may be limited (and approximate).
  • You should use your evaluation to draw clear conclusions about the benefits and drawbacks of the materials(s) considered.

Make clear in your essay, the word must be between 2000-2500 words and references to literature.

Reference no: EM13865325

Questions Cloud

What is the socially-based cause : What is the socially-based cause
Compute descriptive statistics : ZMD is an aerospace company manufacturing commercial aircrafts. ZMD's Aircraft_Series_900 design specifications calls for a certain bolt, Bolt_A, with a minimum ultimate tensile strength of 17.4kN. In addition, ZMD's Quality and Manufacturing depa..
Identify the null hypothesis and the alternative hypothesis : Determine the test statistic. Show all work; writing the correct test statistic, without supporting work, will receive no credit and determine the p-value. Show all work; writing the correct critical value, without supporting work, will receive no c..
Discuss the various e-business models used at american hotel : Discuss the various e-business models used at American Hotel and how these various e-business models evolved and changed over the years this will include the sources of revenues.
Use of aluminium alloys in automotive applications : The use of aluminium alloys in automotive applications is one of the following energy material(s) topics in the world.
Average normal stress : Steel rods AB and BC each have a diameter of 5 mm. If the load of p= 2 kN is applied to the ring, and if ? = 60°, determine the following:
Compare gilgamesh and odysseus as to their heroic qualities : Compare Gilgamesh and Odysseus as to their heroic qualities
Topic-sustainable development : You might proceed by asking yourself a number of questions. What were the initial reasons why the term "sustainable development" was coined?
United states vs. cambodia powerpoint presentation : United States vs. Cambodia PowerPoint Presentation

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the per-unit synchronous reactance of machines

Since typical operating magnetic flux densities exceed the saturation flux densities of iron, these machines are typically designed withoutiron in the magnetic circuit; as a result, these machines exhibitno saturation effects and have low synchron..

  How to write a vhdl or an abel or a verilog program

how to write a VHDL or an ABEL or a Verilog program using Active HDL 6.3 Student Edition or Xilinx Student Edition 6.31 for a generic 3-to-8 binary decoder with active-high inputs and outputs but with only a single enable input.

  Find the hydraulic pressure during the extending stroke

A pump supplies oil at 0.0016 m3/s to a 40 mm diameter double-acting hydraulic cylinder. If the load is 5000 N (extending and retracting) and the rod diameter is 20 mm, find the Hydraulic pressure during the extending stroke.

  Determine what is the frequency of the waveform

the signal shown below is a sine wave as it might be displayed on an oscilloscope. If it takes 40 msec. for the waveform to travel between the points shown by the arrow "B" below, what is the frequency of the waveform

  What c standard library header file must be included

A function must be defined or declared above the locations in the source code file from where it is called. We declare a function by writing a function declaration (which is a statement so it ends with a semicolon). Another term for function decla..

  Calculate the electrostatic energy that is stored

Calculate the electrostatic energy that is stored in the structure if the intermediate space is filled with a dielectric whose relative dielectric constant is 10 and a voltage is applied between the conductors creating an electric field.

  Calculate the total power factor and the percent change

A lighting load operates from a 208-V 60-Hz supply and is rated 1.0 kW with a power factor of 0.9 lagging. A 40-µF capacitor is connected in parallel with this load. Calculate the total power factor and the percent change in line current.

  Execute the ljmp err if eror occurs

write a program that would send out through the serial port an array of twenty bytes of data( need a FOR loop) stored in memory locations starting from 30H( must use a ponter) with even parity added as the ninth bit.( skip baud rate).

  Write program that reads text in file and generates new file

Developing secret codes has interested people for centuries. A simple coding scheme can be developed by replacing each character in a text file by another character that is a fixed number of positions away in the collating sequence.

  Determine what is the voltage drop across the line

A three-phase, 13 kV transmission line delivers 8 MVA of load. The per-phase impedance of the line is (0.01 + j0.05) pu,referred to a 13 kV, 8 MVA base. What is the voltage drop across the line

  What is the boolean output for the input voltage of adc

Consider an ideal 12-bit ADC with Vref=5V is used to sample a1v p-p sinusoidal signal that has a 2.5v offset. What is the boolean output if the input voltage is 3.333v

  Determine the vapor concentration and partial pressure

For the second object, at a location corresponding to the point of measurement on the first object, determine the vapor concentration and partial pressure. If the average heat flux q" is 2000 W/m2 for the first object determine the average mass fl..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd