Upper reservoir supplies the average electrical load

Assignment Help Civil Engineering
Reference no: EM132416603

An island community has 2000 residents, each uses an average of 8 kWh/day. The electricity is presently produced by a diesel generator, but they are considering acquiring a wind turbine. They would like to incorporate pumped water storage in their plans. An open spot on top of a hill could be dug out to form a circular reservoir. The reservoir could be 30 m in diameter and 5 m deep. The hill is 70 m above the town. A reservoir of similar size could be dug out at the same elevation as the town. How many hours could the upper reservoir supplies the average electrical load of the community when discharging to the lower reservoir?

Reference no: EM132416603

Questions Cloud

Determine the pressure at which reheating takes place : Determine the pressure at which reheating takes place. Also show the cycle on a T-s diagram.
What is the claimed rotor power coefficient : An investor comes to you and tells you that a company wants to invest in a new turbine design with the following performance characteristics:
Rotational speed of the flywheel : Assume that the wind speed has suddenly slowed down to where the turbine is no longer generating any power. The rotational speed of the flywheel at that time
What was going on during that time regarding police system : What was going on during that time regarding the police and justice system. How was his early life, how did he become one of the most famous ruthless gagster.
Upper reservoir supplies the average electrical load : How many hours could the upper reservoir supplies the average electrical load of the community when discharging to the lower reservoir?
Discuss the current immigration debate : In a 3-4 page paper discuss the current immigration debate. What are the most recent developments in the debate over immigration and crime?
Estimate the temperature of this wire when heated : The plastic has a thermal conductivity of 0.3 W/m-K and is 0.5 mm thick. Estimate the temperature of this wire when heated at a power of 1 W.
Transfer coefficient for laminar film condensation of oxygen : Estimate the mean heat transfer coefficient for laminar film condensation of oxygen on a vertical row of 10 horizontal tubes.
Did the urge to win lead to a bad decision-making : Did the urge to win lead to a bad decision-making? Why or why not? Did you have to make any concessions during the negotiation process? Please be specific.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the required diameter of the rod

A 4-m-long steel rod must not stretch more than 3 mm and the normal stress must not exceed 150 MPa when the rod is subjected to a 10- KN axial load.

  Corners successively along the e-w lines

Corners successively along the E-W lines

  Determine normal and shear stresses on a plane inclined

A cylindrical specimen of soil is compressed by an axial principal stress of 500 kPa and a radial principal stress of 200 kPa. Plot Mohr's circle of stress and determine (a) the maximum shear stress

  Determine the equilibrium composition of the product gases

Is it realistic to assume that no OH will be present in the equilibrium mixture?

  Sketch a streamline pathline and streakline

Sketch a streamline, pathline, and streakline, For a given flow the velocity from time t=0 to t=5s was u=2 m/s, v=0. Then from t=5s to t=10s the velocity was u=+3 m/s, v=-4 m/s. A dye streak was started at t=0

  Finding average time in system

If the time required to pay for parking is exponentially distributed with a mean of 15 seconds, find the average time in system.

  Calculate average gas temperature in upper layre of room

A steady fire with an energy release rate of 500 kW occurs in a room 3m wide, 3m long, and 2.4 m high, with a door opening which is 1.8 m high and 0.6m wide. the ambient temperature is 20 degree celcius.

  What is the static pressure of the water at the outlet

A PVC pipe has an inside diameter of 40 mm, is 30 m long and carries 10°C water at a rate of 3.5 m3/hr. At this rate, the friction factor of the pipe is 0.0814.

  Pore water pressure at failure

A CU triaxial test with σc = 20 psi is performed on a sand and a deviator stress of 80 psi fails the specimen. Previous tests revealed that the effective friction angle for this sand is 35°. Calculate the pore water pressure at failure.

  Find the change in exergy through the valve

If the steam is throttled down to 2 MPa before entering the turbine, find the actual turbine specific work. Find the change in exergy through the valve and the second-law efficiency of the turbine.

  Compute difference in the weights of dry gravel in a 10 ton

A stockpile of gravel that has a water content of 6% is rained on so that its water content increases to 9%. Compute the difference in the weights of dry gravel in a 10 ton truckload taken from the pile before and after the rain.

  Plot the tensions in wires 1 and 2

plot the tensions in wires 1 and 2 and the magnitude N of the force normal to the slot as functions of time t for the interval ≤ t ≤ 5 s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd