Uniform horizontal beam attached to avertical wall

Reference no: EM13564625

The drawing shows a uniform horizontal beam attached to avertical wall by a frictionless hinge and supported from below atan angle θ = 38o by a brace that isattached to a pin. The beam has a weight of 338 N. Three additional forces keep the beam in equilibrium. The brace applies a forceP to the rightend of the beam that is directed upward at the angle with respectto the horizontal. The hinge applies a force to the left end of thebeam that has a horizontal component H and a vertical componentV. Find themagnitudes of these three forces.

Reference no: EM13564625

Questions Cloud

Find to what height will the ball rebound : A ball is dropped to the ground from a height of 2m. Thecoefficient of restitution is .6.To what height will the ball rebound

Obtain what force is required : A bicycle wheel has a diameter of63.1 cm and a mass of 1.85 kg. What force is required if the chain shifts to a 5.65 cm diameter sprocket

Evaluate the average angular velocity during the dive : A driver makes 2.5 revolutions on the wayfrom a 10m high platform to the water. Assuming zero intialvertical velocity, find the average angular velocity during the dive

Calculate the magnitude of the necessary lifting force : A jet flying at 109 m/s banks to make a horizontal circular turn.The radius of the turn is 3810 m, and the mass of the jet is2.33*105 kg. Calculate the magnitude of the necessary lifting force. L= ?

Uniform horizontal beam attached to avertical wall : The drawing shows a uniform horizontal beam attached to avertical wall by a frictionless hinge and supported from below atan angle θ = 38o by a brace that isattached to a pin. The beam has a weight of 338 N. Three additional forces keep the beam i..

What is the speed of the bus : You are riding in a school bus. As the bus rounds a flat curveat constant speed, a lunch box with the mass 0.500kg, What is the speed of the bus

What is the tangent speed of the ball : A 0.700 kg ball is on the end of a rope that is 1.30m in length.The ball and rope are attached to a pole and the entire apparatus,including the pole, rotates about the pole’s symmetry axis.The rope makes an angle of 70.0 degrees with respect to theve..

Three additional forces keep the beam in equilibrium : The drawing shows a uniform horizontal beam attached to avertical wall by a frictionless hinge and supported from below atan angle θ = 38o by a brace that isattached to a pin.

How high would it go if there were no air friction : A projectile of mass 0.900 kg is shot straight up with aninitial speed of 24.0 m/s. How high would it go if there were no air friction

User Account

All Pages