Undamped and resonant frequencies of the oscillator

Assignment Help Physics
Reference no: EM13541359

The frequency of a slightly damped harmonic oscillator is fd=1000 Hz. The amplitude of this oscillator drops to 1/e^(10) after 25 cycles. What are the undamped and resonant frequencies of the oscillator.

Reference no: EM13541359

Questions Cloud

What is the rotational inertia of ruler around this pivot : A physical pendulum consists of a meter stick (of mass 0.3 kg) that is pivoted at a small hole drilled through the stick a distance x from the 50 cm mark. The meter stick is then released from rest (at a small angle from vertical) and allowed to o..
Determine the initial and the final pressures of refrigerant : A closed, stationary, rigid tank contains Refrigerant 134a, initially at 100oC. The refrigerant is cooled until it becomes saturated vapor at 20oC. Determine the initial and the final pressures of the refrigerant and the heat transfer during the proc..
Neglect any effects due to thermal expansion of the wire : A tungsten wire has a radius of 0.065 mm and is heated from 20.0 to 1425 oC. The temperature coefficient of resistivity is ? = 4.5 x 10-3 (Co)-1. When 190 V is applied across the ends of the hot wire, a current of 1.4 A is produced. How long is the w..
What are the undamped-resonant frequncies of the oscillator : The frequency of a slightly damped harmonic oscillator is Fd=1000 Hz. The amplitude of this oscillator drops to 1/(e^10) after 25 cycles. What are the undamped and resonant frequncies of the oscillator
Undamped and resonant frequencies of the oscillator : The frequency of a slightly damped harmonic oscillator is fd=1000 Hz. The amplitude of this oscillator drops to 1/e^(10) after 25 cycles. What are the undamped and resonant frequencies of the oscillator.
A cyclist is moving down a steep hill : A cyclist is moving down a steep hill that has a grade of 20%. The rider is traveling at 3.5 m/s. The combined weight of the rider and cycle is 800N and the dynamic coefficient of friction between the tires and the road is 0.7. If the rider sudden..
Find the final volume of the gas : A 1.60-mol sample of helium gas initially at 300 K, and 0.400 atm is compressed isothermally to 1.60 atm. Note that the helium behaves as an ideal gas. Find the final volume of the gas.
What is the change in internal energy of the gas : An ideal gas initially at 280 K undergoes an isobaric expansion at 2.50 kPa. The volume increases from 1.00 m3 to 3.00 m3 and 11.4 kJ is transferred to the gas by heat. What is the change in internal energy of the gas?
Net energy transferred to system by heat during one cycle : A gas is taken through the cyclic process described in the figure. (The x axis is marked in increments of 1.5 m3.) Find the net energy transferred to the system by heat during one complete cycle.

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd